DataSheetWiki


LM2797MM-1.8 fiches techniques PDF

National Semiconductor - 120mA High Efficiency Step-Down Switched Capacitor Voltage Converter with Voltage Monitoring

Numéro de référence LM2797MM-1.8
Description 120mA High Efficiency Step-Down Switched Capacitor Voltage Converter with Voltage Monitoring
Fabricant National Semiconductor 
Logo National Semiconductor 





1 Page

No Preview Available !





LM2797MM-1.8 fiche technique
April 2003
LM2797/LM2798
120mA High Efficiency Step-Down Switched Capacitor
Voltage Converter with Voltage Monitoring
General Description
The LM2797/98 switched capacitor step-down DC/DC con-
verters efficiently produce a 120mA regulated low-voltage
rail from a 2.6V to 5.5V input. Fixed output voltage options of
1.5V, 1.8V, and 2.0V are available. The LM2797/98 uses
multiple fractional gain configurations to maximize conver-
sion efficiency over the entire input voltage and output cur-
rent ranges. Also contributing to high overall efficiency is the
extremely low supply current of the LM2797/98: 35µA oper-
ating unloaded and 0.1µA in shutdown.
Features of the LM2797/98 include input voltage and output
voltage monitoring. Pin BATOK provides battery monitoring
by indicating when the input voltage is above 2.85V (typ.).
Pin POK verifies that the output voltage is not more than 5%
(typ.) below the nominal output voltage of the part.
The optimal external component requirements of the
LM2797/98 solution minimize size and cost, making the part
ideal for Li-Ion and other battery powered designs. Two 1µF
flying capacitors and two 10µF bypass capacitors are all that
is required, and no inductors are needed.
The LM2797/98 also features short-circuit protection over-
temperature protection, and soft-start circuitry to prevent
excessive inrush currents. The LM2798 has a 400µs turn-on
time. The turn-on time of the LM2797 is 100µs.
Features
n Output voltage options:
2.0V ± 5%, 1.8V ± 5%, and 1.5V ± 6%
n 120mA output current capability
n Multi-Gain and Gain Hopping for Highest Possible
Efficiency - up to 90% Efficient
n 2.6V to 5.5V input range
n Input and Output Voltage Monitoring (BATOK and POK)
n Low operating supply current: 35µA
n Shutdown supply current: 0.1µA
n Thermal and short circuit protection
n LM2798 turn-on time: 400µs
LM2797 turn-on time: 100µs
n Available in an 10-Pin MSOP Package
Applications
n Cellular Phones
n Pagers
n H/PC and P/PC Devices
n Portable Electronic Equipment
n Handheld Instrumentation
Typical Application Circuit
© 2003 National Semiconductor Corporation DS200445
20044501
www.national.com

PagesPages 14
Télécharger [ LM2797MM-1.8 ]


Fiche technique recommandé

No Description détaillée Fabricant
LM2797MM-1.8 120mA High Efficiency Step-Down Switched Capacitor Voltage Converter with Voltage Monitoring National Semiconductor
National Semiconductor

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche