DataSheetWiki


TB2901HQ fiches techniques PDF

Toshiba Semiconductor - 4-ch Audio Power IC

Numéro de référence TB2901HQ
Description 4-ch Audio Power IC
Fabricant Toshiba Semiconductor 
Logo Toshiba Semiconductor 





1 Page

No Preview Available !





TB2901HQ fiche technique
TB2901HQ(O)
TOSHIBA Bi-CMOS Digital Integrated Circuit Silicon Monolithic
TB2901HQ
Maximum Power 47 W BTL × 4-ch Audio Power IC
The TB2901HQ is 4-ch BTL audio amplifier for car audio
applications.
This IC can generate higher power: POUT MAX = 47 W as it
includes the pure complementary P-ch and N-ch DMOS output
stage.
www.DataSheet4UI.tcoismdesigned to yield low distortion ratio for 4-ch BTL audio
power amplifier, built-in standby function, muting function, and
various kinds of protectors.
Additionally, high-side switch is built in.
Features
Weight: 7.7 g (typ.)
High power output
: POUT MAX (1) = 47 W (typ.)
(VCC = 14.4 V, f = 1 kHz, JEITA max, RL = 4 )
: POUT MAX (2) = 43 W (typ.)
(VCC = 13.7 V, f = 1 kHz, JEITA max, RL = 4 )
POUT MAX (3) = 80 W (typ.)
(VCC = 14.4 V, f = 1 kHz, JEITA max, RL = 2 )
: POUT (1) = 29 W (typ.)
(VCC = 14.4 V, f = 1 kHz, THD = 10%, RL = 4 )
: POUT (2) = 25 W (typ.)
(VCC = 13.2 V, f = 1 kHz, THD = 10%, RL = 4 )
Low distortion ratio: THD = 0.015% (typ.)
(VCC = 13.2 V, f = 1 kHz, POUT = 5 W, RL = 4 )
Low noise: VNO = 90 µVrms (typ.)
(VCC = 13.2 V, Rg = 0 , BW = 20 Hz~20 kHz, RL = 4 )
Built-in standby switch function (pin 4)
Built-in muting function (pin 22)
Built-in high-side switch function (pin 25)
Built-in various protection circuits:
Thermal shut down, overvoltage, out to GND, out to VCC, out to out short
Operating supply voltage: VCC (opr) = 9~18 V (RL = 4 )
Note 1: Since this device’s pins have a low withstanding voltage, please handle it with care.
Note 2: Install the product correctly. Otherwise, it may result in break down, damage and/or degradation to the
product or equipment.
Note 3: These protection functions are intended to avoid some output short circuits or other abnormal conditions
temporarily. These protect functions do not warrant to prevent the IC from being damaged.
In case of the product would be operated with exceeded guaranteed operating ranges, these protection
features may not operate and some output short circuits may result in the IC being damaged.
Note 4: The protection circuit may operate not correctly in case of the use of large phase-shift type speaker.
Therefore, it should be confirmed that there is no problem on actual evaluation or mass-production board.
Especially, it is necessary to be ware such a behavior when the large phase-shift type 2ohm load, which is
a kind of sub-woofer for example, is connected to this IC, though such kind of speaker use is not
recommended.
1 2004-10-15

PagesPages 16
Télécharger [ TB2901HQ ]


Fiche technique recommandé

No Description détaillée Fabricant
TB2901H Maximum Power 47 W BTL x 4-ch Audio Power IC Toshiba Semiconductor
Toshiba Semiconductor
TB2901HQ 4-ch Audio Power IC Toshiba Semiconductor
Toshiba Semiconductor

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche