|
|
PDF WLNJ30-TS Data sheet ( Hoja de datos )
| Número de pieza | WLNJ30-TS | |
| Descripción | WL Robust General Purpose Limit Switch | |
| Fabricantes | Omron Corporation | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de WLNJ30-TS (archivo pdf) en la parte inferior de esta página. Total 24 Páginas | ||
|
No Preview Available !
WL
Robust General-Purpose Limit Switch
Wide Selection of Two-Circuit
Double-Break Limit Switches
s Rugged diecast housing
s High mechanical strength
s Oiltight, waterproof, dustproof
construction
s Overtravel and high-precision types
www.DataSheet4U.caovmailable
s Choose switches with neon lamp or
LED status indicator
WL
WL
Ordering Information
s BASIC TYPE SIDE ROTARY SWITCHES
Total travel 45 degrees, with one-way operation option, 1/2-14NPT conduit (-TS type)
Actuator
Part number
Complete
switch
Head with
lever
Lever
Head
Built-in switch Leverless
Roller
lever
Short (38 mm radius)
Medium (50 mm radius)
Long (63 mm radius)
Adjustable roller lever
Adjustable rod lever (140 mm)
Fork
lock
lever
Left roller on front,
right roller on back
Left roller on back,
right roller on front
Both rollers on front
WLCA2-TS WL-1H1100
WLCA2-7TS WL-1H1200
WLCA2-8TS WL-1H1300
WLCA12-TS WL-1H2100
WLCL-TS
WL-4H4100
WLCA32-41TS WL-5H5100
WLCA32-42TS WL-5H5102
WLCA32-43TS WL-5H5104
WL-1A100
WL-1A200
WL-1A300
WL-2A100
WL-4A100
WL-5A100
WL-5A102
WL-5A104
WL-1H
WL-4H
WL-5H
W-10FB3
WLRCA2-TS
WLRCL-TS
WLRCA32-TS
2
1 page  
WL
Head and Actuator Chart
Symbol
CA2
CA2-7
CA2-8
H2
G2
CA2-2
CA2-2N
GCA2
GCA2-7
GCA2-8
www.DataSheet4CUA.c1o2m
H12
G12
CA12-2
CA12-2N
GCA12
CL
HL
HLAL4
GL
CL-2N
HAL5
CA32-41
CA32-42
CA32-43
D
D2
D28
D3
SD
SD2
SD3
NJ
NJ-30
NJ-2
NJ-2S
Definition
Roller lever, short (38 mm radius), with one-way operation option
Roller lever, medium (50 mm radius), with one-way operation option
Roller lever, long (63 mm radius), with one-way operation option
Roller lever, short (38 mm radius), overtravel: 80 degrees
Roller lever, short (38 mm radius), overtravel: 80 degrees, high sensitivity
Roller lever, short (38 mm radius), overtravel: 90 degrees
Roller lever, short (38 mm radius), overtravel: 90 degrees, with one-way operation option
Roller lever, short (38 mm radius), high precision, with one-way operation option
Roller lever, medium (50 mm radius), high precision, with one-way operation option
Roller lever, long (63 mm radius), high precision, with one-way operation option
Adjustable roller lever, with one-way operation option
Adjustable roller lever, overtravel: 80 degrees
Adjustable roller lever, overtravel: 80 degrees, high sensitivity
Adjustable roller lever, overtravel: 90 degrees
Adjustable roller lever, overtravel: 90 degrees, with one-way operation option
Adjustable roller lever, high precision
Adjustable rod lever (140 mm), with one-way operation option
Adjustable rod lever (140 mm), overtravel: 80 degrees
Adjustable rod lever (380 mm), overtravel: 80 degrees
Adjustable rod lever (140 mm), overtravel: 80 degrees, high sensitivity
Adjustable rod lever (140 mm), overtravel: 90 degrees, with one-way operation option
Spring rod lever, overtravel: 80 degrees
Fork lock lever, left roller on front, right roller on back, with one-way operation option
Fork lock lever, left roller on back, right roller on front, with one-way operation option
Fork lock lever, both rollers on front, with one-way operation option
Top plunger
Top roller plunger
Top sealed roller plunger
Top ball plunger
Horizontal plunger
Horizontal roller plunger
Horizontal ball plunger
Coil spring, 6.5 mm dia.
Coil spring, 5.0 mm dia.
Nylon rod, 8.0 mm dia.
Steel wire, 1.0 mm dia.
WL
6
5 Page 
WL WL
s ROTARY ACTUATOR POSITIONING
Actuators for rotary switches such as
WLCA❑-TS roller lever and WLCL-TS rod
lever switches can be positioned within a
360° range. Loosen the Allen-head set bolt
on the side of the actuator, position the
actuator, then tighten in place.
Actuator lever
can be installed
at any angle in
360°.
s OPERATING HEAD POSITIONING
The operating head of many switches can
be set to four 90° positions to match
installation requirements. Loosen the four
Phillips head screws on the operating
head, and lift the head off. Then, position
with the shaft in the desired direction.
Replace the four screws to fasten the
www.DataSheeot4pUer.actoinmg head. Applicable switches
include those with roller levers (WLCA❑-
TS), rod levers (WLCL-TS), horizontal
plungers (WLSD❑-TS) and roller plungers
(WLD2-TS and WLD28-TS).
Example of roller lever, rod lever and
horizontal plunger switches
Example of roller plunger switches
Head
Loosen the screws
s OPERATING DIRECTION OF STANDARD SWITCHES
Rotary actuator switches can be set for
clockwise (CW), counterclockwise (CCW) or
operation both ways (CW+CCW). To change
the operating direction, loosen the four
screws on the switch head. Then, lift off the
head. The plunger marker inside is set
parallel with the face plate, as shown at right.
Turn the plunger so the marking faces left for
CW or right for CCW as shown. Replace the
actuator head in the direction suitable for the
installation and tighten the four screws.
Operates
Operates
CW+CCW
(both ways
operation)
Operates
CW
90° operation
to right
s ROLLER LEVER ACTUATOR POSITIONING
The roller(s) on roller lever actuators may
be faced inward toward the operating head
or use the more typical installation with the
roller lever facing away from the body. To
change the actuator position, loosen the
Allen-head set bolt, pull the actuator off,
and reposition it on the shaft. Then, tighten
the set bolt at the desired angle.
Loosen the
Allen-head
set bolt
s FORK ROLLER LEVER ACTUATORS
The illustration at right indicates the
differences among the fork lever actuators.
All may be reversed as shown above.
Operates
CCW
90° operation
to left
12
11 Page | ||
| Páginas | Total 24 Páginas | |
| PDF Descargar | [ Datasheet WLNJ30-TS.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| WLNJ30-TS | WL Robust General Purpose Limit Switch | Omron Corporation |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |