|
|
PDF LM2663 Data sheet ( Hoja de datos )
| Número de pieza | LM2663 | |
| Descripción | Switched Capacitor Voltage Converter | |
| Fabricantes | National Semiconductor | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de LM2663 (archivo pdf) en la parte inferior de esta página. Total 12 Páginas | ||
|
No Preview Available !
January 1999
LM2662/LM2663
Switched Capacitor Voltage Converter
General Description
The LM2662/LM2663 CMOS charge-pump voltage con-
verter inverts a positive voltage in the range of 1.5V to 5.5V
to the corresponding negative voltage. The LM2662/LM2663
uses two low cost capacitors to provide 200 mA of output
current without the cost, size, and EMI related to inductor
based converters. With an operating current of only 300 µA
and operating efficiency greater than 90% at most loads, the
LM2662/LM2663 provides ideal performance for battery
powered systems. The LM2662/LM2663 may also be used
as a positive voltage doubler.
The oscillator frequency can be lowered by adding an exter-
nal capacitor to the OSC pin. Also, the OSC pin may be used
to drive the LM2662/LM2663 with an external clock. For
LM2662, a frequency control (FC) pin selects the oscillator
frequency of 20 kHz or 150 kHz. For LM2663, an external
shutdown (SD) pin replaces the FC pin. The SD pin can be
used to disable the device and reduce the quiescent current
to 10 µA. The oscillator frequency for LM2663 is 150 kHz.
Features
n Inverts or doubles input supply voltage
n Narrow SO-8 Package
n 3.5Ω typical output resistance
n 86% typical conversion efficiency at 200 mA
n (LM2662) selectable oscillator
frequency: 20 kHz/150 kHz
n (LM2663) low current shutdown mode
Applications
n Laptop computers
n Cellular phones
n Medical instruments
n Operational amplifier power supplies
n Interface power supplies
n Handheld instruments
Basic Application Circuits
Voltage Inverter
Splitting VIN in Half
DS100003-1
Positive Voltage Doubler
DS100003-2
DS100003-3
© 1999 National Semiconductor Corporation DS100003
www.national.com
1 page  
Typical Performance Characteristics (Circuit of Figure 1) (Continued)
Oscillator Frequency
vs External
Capacitance
Oscillator Frequency
vs Supply Voltage
Oscillator Frequency
vs Supply Voltage
DS100003-46
Oscillator Frequency
vs Temperature
DS100003-47
Oscillator Frequency
vs Temperature
DS100003-48
Shutdown Supply
Current vs
Temperature
(LM2663 Only)
DS100003-49
DS100003-50
DS100003-51
5 www.national.com
5 Page 
Other Applications (Continued)
Also, as shown in Figure 9 by operating the LM2662/LM2663 in voltage doubling mode and adding a low dropout regulator (such
as LP2986) at the output, we can get +5V output from an input as low as +3.3V.
FIGURE 9. Generating +5V from +3.3V Input Voltage
DS100003-29
11 www.national.com
11 Page | ||
| Páginas | Total 12 Páginas | |
| PDF Descargar | [ Datasheet LM2663.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| LM2660 | Switched Capacitor Voltage Converter | National Semiconductor |
| LM2660 | LM2660 Switched Capacitor Voltage Converter (Rev. E) |  Texas Instruments |
| LM2660M | Switched Capacitor Voltage Converter | National Semiconductor |
| LM2660MM | Switched Capacitor Voltage Converter | National Semiconductor |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |