DataSheetWiki


LM2614BTL fiches techniques PDF

National Semiconductor - 400mA Sub-Miniature Adjustable DC-DC Converter Optimized for RF Power Amplifiers

Numéro de référence LM2614BTL
Description 400mA Sub-Miniature Adjustable DC-DC Converter Optimized for RF Power Amplifiers
Fabricant National Semiconductor 
Logo National Semiconductor 





1 Page

No Preview Available !





LM2614BTL fiche technique
August 2002
LM2614
400mA Sub-Miniature Adjustable DC-DC Converter
Optimized for RF Power Amplifiers
General Description
The LM2614 DC-DC converter is optimized for powering RF
power amplifiers (PAs) from a single Lithium-Ion cell. It steps
down an input voltage of 2.8V to 5.5V to an output of 1.0V to
3.6V at up to 400mA (300mA for B grade). Output voltage is
set using an analog input to VCON in the application circuit.
The device offers three modes for mobile phones and similar
RF PA applications. Fixed-frequency PWM mode minimizes
RF interference. A SYNC input allows synchronizing the
switching frequency in a range of 500kHz to 1MHz. Low
current hysteretic PFM mode reduces quiescent current to
160µA (typ.). Shutdown mode turns the device off and re-
duces battery consumption to 0.02µA (typ.).
Current limit and thermal shutdown features protect the de-
vice and system during fault conditions.
The LM2614 is available in a 10 bump micro SMD package.
This packaging uses National’s chip-scale micro SMD tech-
nology and offers the smallest possible size. A high switching
frequency (600kHz) allows use of tiny surface-mount com-
ponents.
The LM2614 can be dynamically controlled for output volt-
age changes from 1.0V to 3.6V in <30µs. The device fea-
tures external compensation to tailor the response to a wide
range of operating conditions.
Key Specifications
n Operates from a single LiION cell (2.8V to 5.5V)
n Adjustable output voltage (1.0V to 3.6V)
n ±1% DC feedback voltage precision
n 400mA maximum load capability(300mA for B grade)
n 600µA typ PWM mode quiescent current
n 0.02µA typ shutdown current
n 600kHz PWM switching frequency
n SYNC input for PWM mode frequency synchronization
from 500kHz to 1MHz
n High efficiency (96% typ at 3.9VIN, 3.6VOUT and 200mA)
in PWM mode from internal synchronous rectification
n 100% Maximum Duty Cycle for Lowest Dropout
Features
n Sub-miniature 10-bump thin micro SMD package
n Uses small ceramic capacitors
n 5mV typ PWM mode output voltage ripple(COUT = 22µF)
n Internal soft start
n Current overload protection
n Thermal Shutdown
n External compensation
Applications
n Mobile Phones
n Hand-Held Radios
n RF PC Cards
n Battery Powered RF Devices
© 2002 National Semiconductor Corporation DS200367
www.national.com

PagesPages 16
Télécharger [ LM2614BTL ]


Fiche technique recommandé

No Description détaillée Fabricant
LM2614BTL 400mA Sub-Miniature Adjustable DC-DC Converter Optimized for RF Power Amplifiers National Semiconductor
National Semiconductor
LM2614BTLX 400mA Sub-Miniature Adjustable DC-DC Converter Optimized for RF Power Amplifiers National Semiconductor
National Semiconductor

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche