DataSheetWiki


LM2608ATL-1.3 fiches techniques PDF

National Semiconductor - 400mA Sub-miniature/ High Efficiency/ Programmable DC-DC Converter with Linear Mode

Numéro de référence LM2608ATL-1.3
Description 400mA Sub-miniature/ High Efficiency/ Programmable DC-DC Converter with Linear Mode
Fabricant National Semiconductor 
Logo National Semiconductor 





1 Page

No Preview Available !





LM2608ATL-1.3 fiche technique
December 2002
LM2608
400mA Sub-miniature, High Efficiency, Programmable
DC-DC Converter with Linear Mode
General Description
The LM2608 step-down DC-DC converter is optimized for
powering ultra-low voltage circuits from a single Lithium-Ion
cell. It provides up to 400mA over an input voltage range of
2.8V to 5.5V. Operating from a 1.35V reference, this device
provides pin-selectable output voltages of 1.3V/1.5V
(300mA) for low voltage version or 1.5V/1.8V (400mA) for
high voltage version. This allows adjustment for DSP or CPU
voltage options, as well as dynamic output voltage switching
for reduced power consumption. Internal synchronous recti-
fication provides high efficiency.
The LM2608 offers superior features and performance for
mobile phones and similar portable applications with com-
plex power management systems. Pin-selectable PWM low-
noise and linear micropower modes offer improved system
control for maximizing battery life. During full power opera-
tion, fixed-frequency PWM mode reduces interference in RF
and data acquisition applications by minimizing noise har-
monics at sensitive IF and sampling frequencies. A SYNC
input allows synchronizing the switching frequency in a
range of 500kHz to 1MHz to avoid noise from intermodula-
tion with system frequencies. Linear operation reduces qui-
escent current to 20µA (typ) during system standby for ex-
tended battery life. It provides up to 3 mA in the linear mode.
Shutdown reduces battery consumption to 0.02µA (typ.).
The LM2608 is available in a 10 pin Micro SMD package.
This package uses National’s wafer level chip-scale Micro
SMD technology and offers the smallest possible size. A high
switching frequency (600KHz) allows use of tiny surface-
mount components. Only four small external surface-mount
components, an inductor and three ceramic capacitors are
required. Pin selectable output voltage eliminates the need
for bulky external feedback resistors.
Key Specifications
n Operates from a single LiION cell (2.8V to 5.5V)
n Pin selectable output voltage (1.5V/1.8V or 1.3V/1.5V
versions), without external feedback resistors
n 400mA maximum load capability
n ±1% PWM mode DC output voltage precision
(Excluding external reference tolerance)
n 5mV typ PWM mode output voltage ripple
n 20 µA typ quiescent current (Linear Mode)
n 0.02µA typ shutdown mode current
n Internal synchronous rectification for high efficiency
(91% at 2.8VIN, 1.8VOUT)
n 600kHz PWM mode switching frequency
n SYNC input for PWM mode frequency synchronization
from 500kHz to 1MHz
n 15% accuracy for FOSC and Ilim
Features
n Sub-miniature 10-pin thin Micro SMD package
n Only four tiny surface-mount external components
required
n Uses small ceramic capacitors
n Internal soft start
n Current and Thermal shutdown protection
n No external compensation required
Applications
n Mobile Phones
n Hand-Held Radios
n Battery Powered Devices
Typical Application Circuit
© 2003 National Semiconductor Corporation DS200366
20036602
www.national.com

PagesPages 18
Télécharger [ LM2608ATL-1.3 ]


Fiche technique recommandé

No Description détaillée Fabricant
LM2608ATL-1.3 400mA Sub-miniature/ High Efficiency/ Programmable DC-DC Converter with Linear Mode National Semiconductor
National Semiconductor
LM2608ATL-1.8 400mA Sub-miniature/ High Efficiency/ Programmable DC-DC Converter with Linear Mode National Semiconductor
National Semiconductor

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche