DataSheetWiki


DAC2812S fiches techniques PDF

MSK - 5.4W DC-DC CONVERTERS

Numéro de référence DAC2812S
Description 5.4W DC-DC CONVERTERS
Fabricant MSK 
Logo MSK 





1 Page

No Preview Available !





DAC2812S fiche technique
M.S.KENNEDY CORP.
4707 Dey Road Liverpool, N.Y. 13088
5.4W
DC-DC
CONVERTERS
FEATURES:
Wave Solderable Package
All Ceramic Capacitors
Surface Mount Magnetics
MIL STD 461C CR03 (DC-DC Converters)
80 Volt Input Transient Tolerent
www.DataShWeeti4dUe.cSomupply Range - 11V to 50V
High Isolation - 500V
High Power Density - 15 W/in³
Output Voltage Adjustment - Standard
Remote Shutdown
Operates to 11V Input at 5W
Available with 12V or 15V Outputs
See DHC2800S Series for 3.3V and 5.0V Versions
Available Soon to DSCC SMD 5962-93093, 5962-94631,
5962-93094 and 5962-94630
Replaces Interpoint MSA2812S, MSA2815S and
IR ASA2812S, ASA2815S
ISO-9001 CERTIFIED BY DSCC
DAC2800S
SERIES
(315) 701-6751
MIL-PRF-38534 CERTIFIED
DESCRIPTION:
The DAC2812S and DAC2815S DC-DC converters are higher output voltage companion devices to MSK's
DHC types. The DAC's provide the ruggedness, reliability and features required to meet the advanced design
challenges of today's hi-rel market. This has been accomplished while retaining a power density of 15 W/
in3 and 375 mW/gram of power/package performance. The use of advanced substrate and reflow soldering
techniques during construction results in a rugged, cost-effective and completely solderable package.
The DAC2800S hybrid converter series utilizes all ceramic capacitors, surface mount magnetics, and
ultrasonically bonded wires to provide reliable operation at all operating temperatures.
The DAC2800S series standard features include output fault monitoring and/or turn on voltage point
programming via the shutdown pin. All three functions may be implemented simultaneously with a minimum
of external components. An output voltage adjustment / load compensation pin which adjusts outputs
simultaneously is also standard.
Fault tolerant design protects these converters from most external circuit faults. The +output and output
adjust pins will withstand +25 V while the shutdown pin will withstand +50 V, protecting the converters
from a variety of system or board faults; e.g. solder bridges etc. Unique load fault protection circuitry allows
this converter to pull up loads having difficult static load line characteristics and allows short term load
excursions significantly beyond ratings in most applications.
A transformer isolated flyback converter topology operating at a switching frequency of 400 kHz allows
operation over a wide input voltage range. Internal filtering of outputs eliminates the need for external
capacitors in many applications.
The 8-pin package is hermetically sealed and isolated from the internal circuits. Heat sinking is
recommended for full power operation at elevated ambient temperatures.
1 Rev. C 7/04

PagesPages 9
Télécharger [ DAC2812S ]


Fiche technique recommandé

No Description détaillée Fabricant
DAC2812D 6W DUAL DC - DC CONVERTERS MSK
MSK
DAC2812S 5.4W DC-DC CONVERTERS MSK
MSK

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche