|
|
PDF C470IP Data sheet ( Hoja de datos )
| Número de pieza | C470IP | |
| Descripción | Review | |
| Fabricantes | Gigaset | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de C470IP (archivo pdf) en la parte inferior de esta página. Total 2 Páginas | ||
|
No Preview Available !
Gigaset C470 IP
Easy to
install
CORDLESS HOME COMMUNICATION
Connection overview
5
6
5
4
31
2
1 Prepare the handset: insert the batteries
2 Connect the charging cradle to the mains power supply and charge the batteries
3 Connect the phone cord and power lead to the base station
4 Connect the base station to the fixed line network and the mains power supply
5 Connect the base station to the Internet, connect the base station to the router
(Connection via router and modem or via router with integrated modem)
6 PC in LAN – for advanced configuration of the Gigaset C470 IP base station
Safety precautions
2
Warning:
Read the safety precautions and the user guide on the CD before use.
Explain their contents and the potential hazards associated with using the telephone to your children.
> Only use the mains adapters supplied, as indicated on the underside of the base station or charging
cradle.
> Only use the recommended, rechargeable batteries, i.e. never use a conventional (non-rechargea-
ble) battery or other battery types as this could result in significant health risks and personal injury.
For example, the batteries could explode. The phone could also malfunction or be damaged as a result
of using batteries that are not of the recommended type.
> Insert rechargeable batteries with the correct polarity, and use them in accordance with the user guide
(polarity symbols can be seen in or on the handset's battery compartment).
> Batteries should not be disposed of in general household waste. Observe the local waste disposal
regulations, details of which can be obtained from your local authority or the dealer you purchased
the product from.
> The operation of medical appliances may be affected. Be aware of the technical conditions in your
particular environment, e.g. doctor's surgery.
> Do not hold the rear of the handset to your ear when it is ringing or when the handsfree function is
activated. Otherwise you risk serious and permanent damage to your hearing.
The handset may cause an unpleasant humming noise in hearing aids.
> Do not install the base station or charging cradle in bathrooms or shower rooms. The handset, base
station and charging cradle are not splashproof.
> The charging cradle and base station are designed for use in enclosed dry rooms with a temperature
range of +5 °C to +45 °C.
> Do not use the phone in environments with a potential explosion hazard, e.g. paint shops.
> Never expose the telephone to heat sources, direct sunlight or other electrical appliances.
> Protect your Gigaset from moisture, dust, corrosive liquids and vapours.
> If you give your Gigaset to someone else, make sure you also give them the user guide.
> Please remove faulty base stations from use or have them repaired by Siemens Service, as they could
interfere with other wireless services.
> All electrical and electronic equipment must be disposed of separately from general household waste
using the sites designated by local authorities.
If a product displays this symbol of a crossed-out rubbish bin, the product is subject to
European Directive 2002/96/EC.
The appropriate disposal and separate collection of used equipment serve to prevent
potential harm to the environment and to health. They are a requirement for the re-use
and recycling of used electrical and electronic equipment.
For further information on disposing of your used equipment, please contact your local
authority, your refuse collection service or the dealer you purchased the product from.
Warning:
When the keypad lock is active, you cannot call emergency numbers.
Preparing the handset
6
1 Inserting the supplied batteries and closing the battery cover
> Check the polarity when inserting the batteries
(see symbols in or on the battery compart-
ment).
> Only use the recommended rechargeable
batteries.
Once the batteries have been inserted, the
handset switches on automatically.
A Insert the battery compartment
cover into the notches at the top of
the battery compartment.
A
B Then press the battery compart-
ment cover until it clicks into
place.
> The display is protected by a plastic film. Please remove the protective film.
B
2 Connecting the charging cradle and charging the batteries
B > Observe the
sequence (A, B).
> Place the handset in the charging cradle and
wait until the batteries are fully charged.
> Do not put the handset back in the charg-
ing cradle until the batteries are fully dis-
A charged through use.
> After the first battery charge and
discharge, replace your handset in the
charging cradle after every call.
> The battery charging status is displayed
in the idle display: = e V U
(flat to full).
Pack contents
5
1
2
3
6
7
34
8
10
11
9
1 Gigaset C470 IP base station
2 Mains adapter for connecting the base station to the mains power supply
3 Phone cord for connecting the base station to the fixed line network
4 Ethernet (LAN) cable for connecting the base station to the router (LAN/Internet)
5 Gigaset C47H handset
6 Two batteries for the handset (uncharged)
7 Battery compartment cover for the handset
8 Belt clip for the handset
9 Mains adapter for connecting the charging cradle to the mains power supply
10 Charging cradle for the handset
11 CD with the user guide for your Gigaset.
If the firmware for your base station is updated, the user guide will also be updated and
made available for download on the Internet at www.siemens.com/gigaset.
Connecting the base station
7
3 Connecting the phone cord and power lead to the base station
B
A
A Insert the phone cord into the lower
connection socket at the rear of the
base station.
B Insert the power lead of the mains
adapter into the upper connection
socket at the rear of the base station.
C
C Insert both cables into their respec-
tive cable recesses.
Only use the supplied phone cord and
the supplied mains adapter.
4 Connecting the base station to the fixed line network and
mains power supply
A Insert the phone cord into the
fixed line network connection
socket.
B Then insert the mains adapter
into the mains socket.
BA
Keep the mains adapter plugged in at
all times for operation, as the phone
does not work without mains connec-
tion.
You can now use your phone to make calls via the fixed line network.
Keys and functions on the handset
4
A Display keys:
B Start function displayed to the left or right of the
bottom display line.
d
Handsfree key:
Switch between earpiece and handsfree mode
(key lights up)
c
Talk key:
After entering number:
start dialling via VoIP/fixed line network (press
briefly/press and hold); accept call
p Control key:
Open directory (press down);
Open list of online directories (press and hold the
bottom of the control key);
Scroll through menus (press up or down);
navigate in text
f
Message key:
Open calls and messages lists;
Flashes: new message/new call
a
End call key, On/Off key:
End call, cancel function (press briefly);
Return to idle status (press and hold),
Switch handset on/off (press and hold)
Ê
Fast access key (press and hold):
Listen to messages on the network mailbox
*
* key: Ringer on/off (press and hold)
#
# key: Keypad lock on/off (press and hold)
S
Recall/pause key (fixed line network)
C
Open call-by-call list (fixed line)
Version: 09.11.2007
A 3 1 0 0 8 - M1 9 1 6 - C4 0 1 - 1 - 7 6 4 3
Connecting the base station
5 Connecting the base station with the router (Internet)
8
B
A
A Connect one Ethernet cable plug to
the LAN socket at the side of the base
station.
B Insert the second Ethernet cable plug
into a LAN socket on the router.
Use the Ethernet cable supplied.
As soon as the cable connecting the phone and router
is plugged in, the key lights up on the front of the
base station (paging key).
6 Connecting the PC to the router
Further configuration of the base station can be performed via a PC in the LAN.
> Connect the PC network connection to a free LAN socket on your router.
1 page | ||
| Páginas | Total 2 Páginas | |
| PDF Descargar | [ Datasheet C470IP.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| C470IP | Providing Professional Solutions |  VOIP |
| C470IP | Review | Gigaset |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |