DataSheetWiki


LA4810M fiches techniques PDF

Sanyo Semicon Device - Monolithic Linear IC Stereo/Monaural BTL Power

Numéro de référence LA4810M
Description Monolithic Linear IC Stereo/Monaural BTL Power
Fabricant Sanyo Semicon Device 
Logo Sanyo Semicon Device 





1 Page

No Preview Available !





LA4810M fiche technique
www.DataSheet4U.com
Ordering number : ENN8213
LA4810M
Monolithic Linear IC
Stereo/Monaural BTL Power
Amplifier
Overview
The LA4810M stereo/monaural BTL power amplifier is an IC that has been developed for portable radios and
compact radio cassette players/recorders containing a preamplifier, a power amplifier, and an electronic volume
control
Applications
Audio equipment such as portable radios and compact radio cassette players/recorders
Functions & Features
2-channel stereo power amplifier
Stereo/monaural BTL selector
Electronic volume control
Incorporates two channels of low-voltage (VCC=1.8V or higher) drive power amplifiers
EIAJ output power 1=125mW typical (VCC=3V, RL=8)
EIAJ output power 2=280mW typical (VCC=4.5V, RL=8)
Configurable as a monaural BTL power amplifier (selected at pin 2)
EIAJ output power 3=350mW typical (VCC=3V, RL=8)
EIAJ output power 4=600mW typical (VCC=4.5V, RL=16)
Onchip electronic volume
Onchip ripple filter
Specifications
Maximum Ratings at Ta=25°C
Parameter
Symbol
Maximum supply voltage
Allowable Power Dissipation
VCC max
Pd max1
Operating Temperature
Topr
Storage Temperature
Tstg
* Specified board: 114.3mm×76.1mm×1.6mm
Conditions
Ta60°C, when mounted on a PCB*
Board material: glass epoxy
Ratings
8
700
-10 to +60
-40 to +150
Unit
V
mW
°C
°C
Any and all SANYO Semiconductor products described or contained herein do not have specifications
that can handle applications that require extremely high levels of reliability, such as life-support systems,
aircraft's control systems, or other applications whose failure can be reasonably expected to result in
serious physical and/or material damage. Consult with your SANYO Semiconductor representative
nearest you before using any SANYO Semiconductor products described or contained herein in such
applications.
SANYO Semiconductor assumes no responsibility for equipment failures that result from using products
at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition
ranges, or other parameters) listed in products specifications of any and all SANYO Semiconductor
products described or contained herein.
92706 / 61305 KK JK No.8213-1/12

PagesPages 12
Télécharger [ LA4810M ]


Fiche technique recommandé

No Description détaillée Fabricant
LA4810M Monolithic Linear IC Stereo/Monaural BTL Power Sanyo Semicon Device
Sanyo Semicon Device

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche