|
|
Número de pieza | PA2011 | |
Descripción | Single SPDT Analog Switch | |
Fabricantes | Protek Devices | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de PA2011 (archivo pdf) en la parte inferior de esta página. Total 8 Páginas | ||
No Preview Available ! www.DataSheet4U.com
PA2011
Low-Voltage, Low RON, Single SPDT Analog Switch.
DESCRIPTION
The PA2011 is a low on-resistance, single-pole
double- throw monolithic CMOS analog switch.
It is designed for low voltage applications with
guaranteed operation at 2 V.
The PA2011 is ideal for portable and battery powered
equipment, requiring high performance and efficient
use of board space. In additional to the low on-
resistance (1.8 Ω at 2.7 V), charge injection is less
than 10 pC over the entire analog range.
The switch conducts equally well in both directions
when on, and blocks up to the power supply level
when off.
Break-before-make is guaranteed.
FEATURES
• Low Voltage Operation (1.8 V to 3.3 V)
• Low On-Resistance - rON: 1.8 Ω at 2.7 V
• Low Charge Injection
• Low Voltage Logic Compatible
• SC-89 Package (1.6 x 1.6 mm)
BENEFITS
• Reduced Power Consumption
• Simple Logic Interface
• High Accuracy
• Reduce Board Space
• Guaranteed 2 V Operation
APPLICATIONS
• Cellular Phones
• Communication Systems
• Portable Test Equipment
• Battery Operated Systems
• Sample and Hold Circuits
• ADC and DAC Applications
FUNCTIONAL BLOCK DIAGRAM AND PIN CONFIGURATION
IN
V+
GND
1
2
3
DFN-6
Top View
6 NO (Source1)
5 COM
4 NC (Source2)
Pin 1
PA2011
TRUTH TABLE
Logic
0
1
NC
ON
OFF
NO
OFF
ON
ORDERING INFORMATION
Temp Range
- 40 to 85 °C
Package
SC-89
Tape and Reel
SC-89
Lead (Pb)-free with
Tape and Reel
Part Number
PA2011- T7
PA2011-LF
PA2011-LF-T7
Device Marking: PA2011
xx Date Code
2929 S. Fair Lane, Tempe, AZ 85282 Tel: (602) 414–5122. Fax: (602) 414--5141
www.protekdevices.com
1 page www.DataSheet4U.com
PA2011
TYPICAL CHARACTERISTICS TA = 25 °C, unless otherwise noted
45
40
35
30
25 tON V+ = 2 V
20
15 tON V+ = 3 V
10
0
LOSS
10
20
30
40
50 XTALK
60 OIRR
10
5
0
- 60
tOFF V+ = 2 V
tOFF V+ = 3 V
- 40 - 20 0
20 40 60 80 100
Temperature (°C)
Switching Time vs. Temperature and Supply Voltage
70
V+ = 3.3 V
80 RL = 50
90
100 K
1M
10 M
100 M
Frequency (Hz)
Insertion Loss, Off-Isolation,
Crosstalk vs.Frequency
1G
3.0 30
2.5 20
V+ = 2 V
2.0 10
1.5 0 V+ = 3 V
1.0 10
0.5 20
0.0
01234 567
V+ – Supply Voltage (V)
Switching Threshold vs. Supply Voltage
30
0
123456
VCOM – Analog Voltage (V)
Charge Injection vs. Analog Voltage
2929 S. Fair Lane, Tempe, AZ 85282 Tel: (602) 414–5122. Fax: (602) 414--5141
www.protekdevices.com
5 Page |
Páginas | Total 8 Páginas | |
PDF Descargar | [ Datasheet PA2011.PDF ] |
Número de pieza | Descripción | Fabricantes |
PA2010 | 200 TO 2000 MHz TO-8 CASCADABLE AMPLIFIER | Tyco Electronics |
PA2011 | Single SPDT Analog Switch | Protek Devices |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |