|
|
PDF VSC8601 Data sheet ( Hoja de datos )
| Número de pieza | VSC8601 | |
| Descripción | 10/100/1000Base-T PHY | |
| Fabricantes | Vitesse Semiconductor | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de VSC8601 (archivo pdf) en la parte inferior de esta página. Total 70 Páginas | ||
|
No Preview Available !
www.DataSheet4U.com
VSC8601
10/100/1000BASE-T PHY with RGMII
MAC Interface
Datasheet
VMDS-10210
Revision 4.0
November 2007
1 page  
www.DataSheet4U.com
VSC8601 Datasheet
Contents
5.2.3 Consumption with 10BASE-T Link.............................................................. 72
5.2.4 Consumption with No Link and ActiPHY Enabled .......................................... 73
5.2.5 Consumption with No Link and ActiPHY Disabled ......................................... 73
5.2.6 Consumption in Power-Down Mode............................................................ 74
5.2.7 Consumption in Reset State ..................................................................... 75
5.3 AC Characteristics .............................................................................................. 75
5.3.1 Reference Clock Input ............................................................................. 76
5.3.2 Clock Output .......................................................................................... 76
5.3.3 JTAG Interface ....................................................................................... 77
5.3.4 SMI Interface ......................................................................................... 77
5.3.5 Device Reset .......................................................................................... 78
5.3.6 RGMII Uncompensated ............................................................................ 80
5.3.7 RGMII Compensated ............................................................................... 81
5.4 Operating Conditions .......................................................................................... 82
5.5 Stress Ratings ................................................................................................... 83
6 Pin Descriptions ...............................................................................84
6.1 Pin Diagram ...................................................................................................... 84
6.2 Pin Identifications............................................................................................... 85
6.2.1 Twisted Pair Interface .............................................................................. 85
6.2.2 RGMII MAC Interface .............................................................................. 86
6.2.3 Serial Management Interface (SMI)........................................................... 87
6.2.4 JTAG ..................................................................................................... 88
6.2.5 Miscellaneous......................................................................................... 88
6.2.6 Power Supply ......................................................................................... 89
6.2.7 Power Supply and Associated Function....................................................... 90
7 Package Information........................................................................91
7.1 Package Drawing................................................................................................ 91
7.2 Thermal Specifications ........................................................................................ 93
7.3 Moisture Sensitivity ............................................................................................ 93
8 Design Considerations .....................................................................94
8.1 RX_CLK Can Reach as High as 55% Duty Cycle ...................................................... 94
8.2 First SMI Write Fails after Software Reset .............................................................. 94
8.3 Link-Up Issue In Forced 100BASE-TX Mode ............................................................ 94
9 Ordering Information .......................................................................96
Revision 4.0
November 2007
Page 5
5 Page 
www.DataSheet4U.com
VSC8601 Datasheet
Revision History
• For all the current consumption specifications with the on-chip switching regulator
enabled, the specification values for IVDD12 and IVDD12A were removed because
they were inadvertently added in a prior revision of this document. The IVDD12 and
IVDD12A values are kept for current consumption with the regulator disabled.
• For the 100BASE current consumption specifications, all references to the speed
were corrected from 100BASE-X to 100BASE-TX.
• In the AC characteristics for the CLKOUT pin, the total jitter specifications were
added. They are 217 ps typical and 491 ps maximum.
• For device reset, both the reset characteristics and timing diagram were updated to
include new parameters: reset rise time (tRST_RISE) and supply stable time
(tVDDSTABLE).
• In the stress ratings, the power supply voltage parameter was removed because it
was redundant.
• In the pin description for TX_CLK, the rate was clarified to be 2.5 MHz for 10 Mbps
mode, 25 MHz for 100 Mbps mode, or 125 MHz for 1000 Mbps mode.
• The errata item “RX_CLK Can Reach as High as 55% Duty Cycle” remains in effect
but all other errata items no longer apply to the latest part revision.
Revision 2.1
Revision 2.1 of this datasheet was published in February 2006. The following is a
summary of the changes implemented in the datasheet:
• In the high-level block diagram, representation of the XTAL pin was corrected from
“XTAL 1/2” to “XTAL1” and “XTAL2.”
• In the RGMII to Cat5 block diagram, the interface name was corrected from GMII to
RGMII.
• New information was added about how to manually force the device to use
MDI/MDI-X.
• The VSC8601 device switches between the low-power state and LP wake-up state
every two seconds; the rate is not programmable, as was originally stated.
• In the link partner wake-up state, the device sends FLP bursts for two seconds;
they are not limited to three bursts, as was originally stated.
• In the description of the PHY address for the serial management interface (SMI),
the physical address was corrected from 3:0 to 4:0.
• For the enhanced LED method, controlled by MII Register 16E, two of the LED
modes have changed. Mode 11, TX activity, and mode 13, RX activity, are now both
reserved.
• In the description of the far-end loopback testing feature, the controlling register
bit was corrected from 23.3 to 27E.10.
• For the JTAG interface instructions EXTEST and SAMPLE/PRELOAD, the values for
register width were modified from TBD to 45.
Revision 4.0
November 2007
Page 11
11 Page | ||
| Páginas | Total 70 Páginas | |
| PDF Descargar | [ Datasheet VSC8601.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| VSC8601 | 10/100/1000Base-T PHY | Vitesse Semiconductor |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |