|
|
Numéro de référence | MAX13038 | ||
Description | (MAX13037 / MAX13038) Automotive Contact Monitor and Level Shifters | ||
Fabricant | Maxim Integrated Products | ||
Logo | |||
1 Page
www.DataSheet4U.com
19-1084; Rev 0; 11/07
Automotive Contact Monitor and
Level Shifters with LDO Regulator
General Description
The MAX13037/MAX13038 automotive contact monitor
and level shifters monitor and debounce eight remote
mechanical switches and assert an interrupt (INT) if a
switch changes state. The state of each switch is sam-
pled through an SPI™ interface by reading the status
register. Any switch can be prohibited from asserting an
interrupt by writing to the command register. Four of the
switch inputs are intended for ground-connected
switches (IN0–IN3) and the other four inputs (IN4–IN7)
are programmable in groups of two for either ground-
connected or battery-connected switches. Two switch
inputs (IN0, IN1) have direct level-shifted outputs (DO0,
DO1) to be used for PWM or other timing-based signals.
Switch input thresholds are set to 50% of the voltage
applied to BATREF. The threshold hysteresis is set by
connecting an external resistor from HYST to ground.
The MAX13037/MAX13038 supply an adjustable wet-
ting current to each closed switch to clean mechanical
switch contacts that are exposed to adverse conditions.
The MAX13037/MAX13038 feature a low dropout (LDO)
linear regulator capable of supplying up to 150mA of
current. The MAX13037 LDO has an output voltage of
+5V, whereas the MAX13038 has an output voltage of
+3.3V. The MAX13037/MAX13038 also feature a watch-
dog timer and an open-drain reset output with
adjustable timing.
The MAX13037/MAX13038 operate with a +6V to +26V
battery voltage applied to BAT. The MAX13037/
MAX13038 are available in a 6mm x 6mm, 36-pin TQFN
package and operate over the automotive -40°C to
+125°C temperature range.
Applications
Body Computers
Window Lifters
Seat Movers
Electric Sunroofs
Other Control ECUs
SPI is a trademark of Motorola, Inc.
Features
o +6V to +26V Operating Voltage Range
o +42V Compatibility on BAT
o Switch Inputs Withstand Reverse Battery
o 150mA LDO, +5V (MAX13037) or +3.3V
(MAX13038)
o Ultra-Low Operating Current 28µA (typ) in 64ms
Scan Mode with LDO ON
o Resistor Adjustable Switching Hysteresis
o Watchdog and Reset
o Built-In Switch Debouncing
o Interrupt Output
o Immunity to Transients
o High Modularity
o Thermal Protection
o ±8kV HBM ESD Protection on IN0–IN7 Without
External Components
o Two Inputs (IN0, IN1) Programmable as Direct
Outputs
o Four Inputs (IN4–IN7) Programmable for BAT or
GND Related Switches
Ordering Information
PART
LDO
OUTPUT
TEMP
PIN-
VOLTAGE RANGE PACKAGE
PKG
CODE
MAX13037ATX+
+5V
-40°C to
+125°C
36 TQFN-EP*
(6mm x
6mm)
T3666-3
MAX13038ATX+
+3.3V
-40°C to 36 TQFN-EP*
+125°C
(6mm x
6mm)
T3666-3
+Denotes a lead-free package.
*EP = Exposed paddle.
Pin Configuration and Typical Application Circuit at end of data sheet.
________________________________________________________________ Maxim Integrated Products 1
For pricing, delivery, and ordering information, please contact Maxim Direct at 1-888-629-4642,
or visit Maxim’s website at www.maxim-ic.com.
|
|||
Pages | Pages 22 | ||
Télécharger | [ MAX13038 ] |
No | Description détaillée | Fabricant |
MAX1303 | (MAX1302 / MAX1303) Serial 16-Bit ADCs | Maxim Integrated Products |
MAX13030E | (MAX13030E - MAX13035E) 6-Channel High SPeed LLT | Maxim Integrated Products |
MAX13031E | (MAX13030E - MAX13035E) 6-Channel High SPeed LLT | Maxim Integrated Products |
MAX13032E | (MAX13030E - MAX13035E) 6-Channel High SPeed LLT | Maxim Integrated Products |
US18650VTC5A | Lithium-Ion Battery | Sony |
TSPC106 | PCI Bus Bridge Memory Controller | ATMEL |
TP9380 | NPN SILICON RF POWER TRANSISTOR | Advanced Semiconductor |
www.DataSheetWiki.com | 2020 | Contactez-nous | Recherche |