DataSheetWiki


T6963CFG fiches techniques PDF

Toshiba Semiconductor - DOT MATRIX LCD CONTROLLER LSI

Numéro de référence T6963CFG
Description DOT MATRIX LCD CONTROLLER LSI
Fabricant Toshiba Semiconductor 
Logo Toshiba Semiconductor 





1 Page

No Preview Available !





T6963CFG fiche technique
www.DataSheet4U.com
T6963CFG
TOSHIBA CMOS DIGITAL INTEGRATED CIRCUIT SILICON MONOLITHIC
T6963CFG
DOT MATRIX LCD CONTROLLER LSI
The T6963CFG is an LCD controller designed to be used with LCD control driver LSIs and data display memories.
The device has an 8bit parallel data bus and control lines for
reading or writing through an MPU interface. It can be directly
connected to a TMPZ80.
It has a 128word character generator ROM which can control an
external display RAM of up to 64 Kbytes. Allocation of text,
graphics and external character generator RAM can be made
easily and the display window can be moved freely within the
allocated memory range.
The device supports a very broad range of LCD formats by
allowing selection of different combinations via a set of
programmable inputs. It can be used in text, graphic and
combination textandgraphic modes, and includes various
attribute functions.
The T6963CFG is lead (Pb)-free (Sn-Ag) product.
Features
Weight: 1.2 g (typ.)
z Display format (pinselectable)
Columns
: 32, 40, 64, 80
Lines
: 2, 4, 6, 8, 10, 12, 14, 16, 20, 24, 28, 32
The combination of number of columns and number of lines must not cause the frequency to exceed 5.5 MHz.
(See Fig. 2)
z Character font (pinselectable)
Horizontal dots
: 5, 6, 7, 8
Vertical dots
: 8 (fixed)
It is necessary to set a character font in Graphic mode just as in Text mode. The oscillation frequency does not
change with the font selection.
z Display duty
: 1 / 16 to 1 / 128
z A 128word character generator ROM (code 0101) T6963CFG0101 is built in as standard.
z External display memory : 64 KB Max
The addresses in display memory of the text area, graphic area and external character generator area are
determined by software.
z Read or Write operations from the CPU do not disturb the display.
z A crystal oscillator circuit is built in. The oscillation frequency is adjusted according to the display size. If using
an external clock, use the XI pin as the clock input. (XO open.)
External capacitors Crystal oscillation : 20 to 30 pF
Ceramic oscillation : 30 to 100 pF
Builtin feedback resistor
: 900 k(typ.)
z Toshiba LCD driver LSIs (other than these with a builtin RAM) can be connected to the device.
z External display RAM must be static RAM. The T6963CFG cannot refresh DRAM.
z The attribute functions can only be used in Text mode. They cannot be used in Graphic or Combination
Character mode.
1 2007-05-15

PagesPages 30
Télécharger [ T6963CFG ]


Fiche technique recommandé

No Description détaillée Fabricant
T6963CFG DOT MATRIX LCD CONTROLLER LSI Toshiba Semiconductor
Toshiba Semiconductor

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche