DataSheetWiki


TDA9910 fiches techniques PDF

NXP Semiconductors - Analog-to-Digital Converter (ADC) direct/ultra high IF sampling

Numéro de référence TDA9910
Description Analog-to-Digital Converter (ADC) direct/ultra high IF sampling
Fabricant NXP Semiconductors 
Logo NXP Semiconductors 





1 Page

No Preview Available !





TDA9910 fiche technique
www.DataSheet4U.com
TDA9910
12-bit, up to 80 Msample/s, Analog-to-Digital Converter (ADC)
direct/ultra high IF sampling
Rev. 02 — 9 December 2004
Objective data sheet
1. General description
The TDA9910 is a 12-bit Analog-to-Digital Converter (ADC) optimized for direct IF
sampling, and supporting the most demanding use conditions in ultra high IF radio
transceivers for cellular infrastructure and other applications such as wireless access
system, optical networking and fixed telecommunication. Thanks to its broadband input
capabilities, the TDA9910 is ideal for single and multiple carriers data conversion.
Operating at a maximum sampling rate of 80 Msample/s, analog input signals are
converted into 12-bit binary coded digital words. All static digital inputs are CMOS
compatible. All output signals are LVCMOS compatible. The TDA9910 offers the most
possible flexible acquisition control system thanks to its programmable Complete
Conversion Signal (CCS) that allows to adjust the delay of the acquisition clock.
Thanks to its internal front-end buffer, the TDA9910 offers the lowest input capacitance
(< 1 pF) and therefore the highest flexibility in front-end aliasing filter strategy.
Released in HTQFP48, it keeps the industry's smallest ADC of its category.
2. Features
s 12-bit resolution
s Direct IF sampling up to 370 MHz
s 90 dB SFDR; 71 dB SNR (fi = 225 MHz; B = 5 MHz)
s 72 dB SFDR; 66 dB SNR (fi = 175 MHz; B = Nyquist)
s High-speed sampling rate up to 80 Msample/s
s Programmable acquisition output clock (complete conversion signal)
s Internal front-end buffer (input capacitance below 1 pF)
s Full-scale controllable from 1.5 V to 2 V (p-p); continuous scale
s Single 5 V power supply
s 3.3 V LVCMOS compatible digital outputs
s Binary or two’s-complement LVCMOS outputs
s CMOS compatible static digital inputs
s Only 2 clock cycles latency
s Industrial temperature range from 40 °C to +85 °C
s HTQFP48 package.

PagesPages 21
Télécharger [ TDA9910 ]


Fiche technique recommandé

No Description détaillée Fabricant
TDA9910 Analog-to-Digital Converter (ADC) direct/ultra high IF sampling NXP Semiconductors
NXP Semiconductors
TDA9917 up to 250 Msample/s Analog-to-Digital Converter (ADC) NXP Semiconductors
NXP Semiconductors

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche