DataSheetWiki


89HPES48T12 fiches techniques PDF

IDT - 48-Lane 12-Port PCI Express Switch

Numéro de référence 89HPES48T12
Description 48-Lane 12-Port PCI Express Switch
Fabricant IDT 
Logo IDT 





1 Page

No Preview Available !





89HPES48T12 fiche technique
www.DataSheet4U.com
48-Lane 12-Port
PCI Express® Switch
®
89HPES48T12
Data Sheet
Device Overview
The 89HPES48T12 is a member of the IDT PRECISE™ family of
PCI Express® switching solutions. The PES48T12 is a 48-lane, 12-port
peripheral chip that performs PCI Express packet switching with a
feature set optimized for high-performance applications such as servers,
storage, and communications/networking. It provides connectivity and
switching functions between a PCI Express upstream port and up to
eleven downstream ports and supports switching between downstream
ports.
Features
High Performance PCI Express Switch
– Twelve switch ports
Six main ports each of which consists of 8 SerDes
Each x8 main port can further bifurcate to 2 x4-ports
– Forty-eight 2.5 Gbps embedded SerDes
Supports pre-emphasis and receive equalization on per-port
basis
– Delivers 192 Gbps (24 GBps) of aggregate switching capacity
– Low-latency cut-through switch architecture
– Support for Max Payload Size up to 2048 bytes
– Supports one virtual channel and eight traffic classes
– PCI Express Base Specification Revision 1.1 compliant
Flexible Architecture with Numerous Configuration Options
– Port arbitration schemes utilizing round robin algorithms
– Automatic per port link width negotiation to x8, x4, x2 or x1
– Automatic lane reversal on all ports
– Automatic polarity inversion on all lanes
– Supports locked transactions, allowing use with legacy soft-
ware
– Ability to load device configuration from serial EEPROM
– Ability to control device via SMBus
Highly Integrated Solution
– Requires no external components
– Incorporates on-chip internal memory for packet buffering and
queueing
– Integrates forty-eight 2.5 Gbps embedded full duplex SerDes,
8B/10B encoder/decoder (no separate transceivers needed)
Reliability, Availability, and Serviceability (RAS) Features
– Redundant upstream port failover capability
– Supports optional PCI Express end-to-end CRC checking
Block Diagram
Route Table
Frame Buffer
x8/x4/x2/x1
SerDes
DL/Transaction Layer
Upstream
12-Port Switch Core
Port
Arbitration
Scheduler
DL/Transaction Layer
SerDes
DL/Transaction Layer
SerDes
DL/Transaction Layer
SerDes
DL/Transaction Layer
SerDes
DL/Transaction Layer
SerDes
x8/x4/x2/x1
x8/x4/x2/x1
x8/x4/x2/x1
x8/x4/x2/x1
48 PCI Express Lanes
Up to 6 x8 ports or 12 x4 Ports
Figure 1 Internal Block Diagram
x8/x4/x2/x1
© 2007 Integrated Device Technology, Inc.
IDT and the IDT logo are registered trademarks of Integrated Device Technology, Inc.
1 of 47
July 19, 2007
DSC 6924

PagesPages 30
Télécharger [ 89HPES48T12 ]


Fiche technique recommandé

No Description détaillée Fabricant
89HPES48T12 48-Lane 12-Port PCI Express Switch IDT
IDT

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche