|
|
PDF G276P Data sheet ( Hoja de datos )
| Número de pieza | G276P | |
| Descripción | Complementary Output Hall Effect Latched Sink Driver IC | |
| Fabricantes | GTM | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de G276P (archivo pdf) en la parte inferior de esta página. Total 5 Páginas | ||
|
No Preview Available !
www.DataSheet4U.com
ISSUED DATE :2005/11/24
REVISED DATE :
G276P
Complementary Output Hall Effect Latched Sink Driver IC
Description
The G276P is an integrated Hall sensors with output drivers designed for electronic commutation of brushless DC motor
applications. The device includes an on-chip Hall voltage generator for magnetic sensing, a comparator that amplifies the
Hall voltage, and a Schmitt trigger to provide switching hysteresis for noise rejection, and complementary open-collector
drivers for sinking large current loads. An internal bandgap regulator is used to provide temperature compensated supply
voltage for internal circuits and allows a wide operating supply range.
If a magnetic flux density larger than threshold Bop, DO is turned on (low) and DOB is turned off (high). The output state is
held until a magnetic flux density reversal falls below Brp causing DO to be turned off and DOB turned on.
G276P is rated for operation over temperature range from -20 to 85 and voltage range from 3.5V to 20V. The devices
are available in low cost die forms or rugged 4 pin SIP packages.
Features
*On-chip Hall sensor IC with two different sensitivity and hysteresis settings for G276P
*Internal bandgap regulator allows temperature compensated operations and a wide operating voltage range.
*High output sinking capability up to 300mA for driving large load.
*Lower current change rate reduces the peak output voltages during switching.
*Build in protection diode for chip reverse power connecting.
*Package: SIP-4L.
Application
1)Brushless DC Motor
2)Brushless DC Fan
3)Revolution Counting
4)Speed Measurement
Package Dimensions
REF.
A
A1
b
b1
Millimeter
Min. Max.
1.295 1.803
0.610
0.330 0.432
0.406 0.508
REF.
D
E
L
e
Millimeter
Min. Max.
5.105 5.359
3.531 3.785
14.00 16.00
1.27REF
G276P
Page: 1/5
1 page  
Application Circuit Double Coil
1) Output on current, Ic > 250mA
2) With FG output
ISSUED DATE :2005/11/24
REVISED DATE :
Remark: C1, C2: Capacitor 2.2 F~4.7 F (optional)
Remark: C1: Capacitor 0.1 F~1 F R1: Resister 1K
Package Information
Active Area Depth
Top
View
Marking
Site
0.7mm
Tolerance: +/- 0.05mm
Package Sensor Location
1.35mm
1.75mm
Top
View
1234
Important Notice:
All rights are reserved. Reproduction in whole or in part is prohibited without the prior written approval of GTM.
GTM reserves the right to make changes to its products without notice.
GTM semiconductor products are not warranted to be suitable for use in life-support Applications, or systems.
GTM assumes no liability for any consequence of customer product design, infringement of patents, or application assistance.
Head Office And Factory:
Taiwan: No. 17-1 Tatung Rd. Fu Kou Hsin-Chu Industrial Park, Hsin-Chu, Taiwan, R. O. C.
TEL : 886-3-597-7061 FAX : 886-3-597-9220, 597-0785
China: (201203) No.255, Jang-Jiang Tsai-Lueng RD. , Pu-Dung-Hsin District, Shang-Hai City, China
TEL : 86-21-5895-7671 ~ 4 FAX : 86-21-38950165
G276P
Page: 5/5
5 Page | ||
| Páginas | Total 5 Páginas | |
| PDF Descargar | [ Datasheet G276P.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| G276P | Complementary Output Hall Effect Latched Sink Driver IC | GTM |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |