|
|
PDF GH06560B2C Data sheet ( Hoja de datos )
| Número de pieza | GH06560B2C | |
| Descripción | Laser Diodes | |
| Fabricantes | Sharp Electrionic Components | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de GH06560B2C (archivo pdf) en la parte inferior de esta página. Total 5 Páginas | ||
|
No Preview Available !
Laser Diodes
www.DataSheet4U.com
GH06560B2C
(Under development)
■ Features
(1) ✕4 speed DVD-R/+R/-RW/+RW/RAM drives
(2) High power output (pulse MAX. 100mW)
(3) Low aspect ratio type (Aspect ratio : 1.7)
The shaping prism of a pick-up becomes unnecessary and
the composition of optical parts can be simplified.
(4) To set MAX. 662 nm wavelength to be compatible with
pigment media such as DVD-R/+R
(5) Operating temperature : MAX. 70˚C
(6) φ5.6mm package
■ Applications
(1) DVD-R/+R drives
(2) DVD-RW/+RW drives
(3) DVD-RAM drives
GH06560B2C
High Power Red Laser Diode for
✕4 Speed DVD Drive (658nm-pulse 100mW)
■ Outline Dimensions
X
❇2
90 ±2
(Unit : mm)
Y
0.4±0.1
1
2
3
Emission point
❇2
+0
ø5.6 – 0.025
ø4.4MAX.
ø3.55±0.1
ø1.0 MIN.
Z
Laser chip
Reference plane 0.5 MIN.
Cap glass
ø1.2 MAX.
Tolerance ±0.2mm
Terminal connection
qe
Non connection
3-ø0.45±0.1
21
3
❇1: Dimension measured at lead base
❇2 : Within 0.6mm from reference plane
Enlarged view of emission point
X
Emission point
Laser
diode
w
Y 0±0.08
0±0.08
Center of virtual circle that runs
3 points on the stem periphery
■ Absolute Maximum Ratings
(TC=25˚C ❇1)
Parameter
❇3 Optical power output
❇2 Optical power output (pulse)
Symbol
PO
Pp
Rating
60
100
Unit
mW
mW
Reverse voltage
❇1 Operating
temperature
❇3
❇2
Laser
CW
Pulse
Vrl
Topc(c)
Topp(c)
2
-10 to +70
-10 to +70
V
˚C
˚C
Storage temperature
❇4 Soldering temperature
Tstg -40 to +85
Tsld 300
˚C
˚C
❇1 Case temperature
❇2 Pulse width : 0.3µs, Duty : 50%
❇3 CW (Continuous Wave) drive
❇4 At the position of 1.6mm or more from the lead base (3s)
Notice In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP
devices shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device.
Internet Internet address for Electronic Components Group http://sharp-world.com/ecg/
47
1 page  
Application Circuits
NOTICE
●The circuit application examples in this publication are provided to explain representative applications of
SHARP devices and are not intended to guarantee any circuit design or license any intellectual property
rights. SHARP takes no responsibility for any problems related to any intellectual property right of a
third party resulting from the use of SHARP's devices.
●Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device.
SHARP reserves the right to make changes in the specifications, characteristics, data, materials,
structure, and other contents described herein at any time without notice in order to improve design or
reliability. Manufacturing locations are also subject to change without notice.
●Observe the following points when using any devices in this publication. SHARP takes no responsibility
for damage caused by improper use of the devices which does not meet the conditions and absolute
maximum ratings to be used specified in the relevant specification sheet nor meet the following
conditions:
(i) The devices in this publication are designed for use in general electronic equipment designs such as:
--- Personal computers
--- Office automation equipment
--- Telecommunication equipment [terminal]
--- Test and measurement equipment
--- Industrial control
--- Audio visual equipment
--- Consumer electronics
(ii)Measures such as fail-safe function and redundant design should be taken to ensure reliability and
safety when SHARP devices are used for or in connection with equipment that requires higher
reliability such as:
--- Transportation control and safety equipment (i.e., aircraft, trains, automobiles, etc.)
--- Traffic signals
--- Gas leakage sensor breakers
--- Alarm equipment
--- Various safety devices, etc.
(iii)SHARP devices shall not be used for or in connection with equipment that requires an extremely
high level of reliability and safety such as:
--- Space applications
--- Telecommunication equipment [trunk lines]
--- Nuclear power control equipment
--- Medical and other life support equipment (e.g., scuba).
●Contact a SHARP representative in advance when intending to use SHARP devices for any "specific"
applications other than those recommended by SHARP or when it is unclear which category mentioned
above controls the intended use.
●If the SHARP devices listed in this publication fall within the scope of strategic products described in the
Foreign Exchange and Foreign Trade Law of Japan, it is necessary to obtain approval to export such
SHARP devices.
●This publication is the proprietary product of SHARP and is copyrighted, with all rights reserved. Under
the copyright laws, no part of this publication may be reproduced or transmitted in any form or by any
means, electronic or mechanical, for any purpose, in whole or in part, without the express written
permission of SHARP. Express written permission is also required before any use of this publication
may be made by a third party.
●Contact and consult with a SHARP representative if there are any questions about the contents of this
publication.
150
5 Page | ||
| Páginas | Total 5 Páginas | |
| PDF Descargar | [ Datasheet GH06560B2C.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| GH06560B2C | Laser Diodes | Sharp Electrionic Components |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |