|
|
PDF GP2A230LRSAF Data sheet ( Hoja de datos )
| Número de pieza | GP2A230LRSAF | |
| Descripción | Refl ective Photointerrupter | |
| Fabricantes | Sharp Electrionic | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de GP2A230LRSAF (archivo pdf) en la parte inferior de esta página. Total 12 Páginas | ||
|
No Preview Available !
www.DataSheet4U.com
GP2A231LRSAF/GP2A230LRS0F/GP2A230LRSAF
GP2A231LRSAF
GP2A230LRS0F
GP2A230LRSAF
Snap-in type
Detecting Distance : 1 to 9mm
*OPIC Output,
Reflective Photointerrupter with
Connector
■ Description
GP2A230LRS0F Series are standard, OPIC output,
reflective photointerrupters with emittter and detector
facing the same direction in a molding that provides
non-contact sensing. This family of devices uses light
modulation to reduce the affects of disturbing light, and
the sensor is optimized to work in the selected focal
distance. A 3-pin connector is included to allow remote-
mount or off-board designs.
■ Agency approvals/Compliance
1. Compliant with RoHS directive
■ Applications
1. General purpose detection of paper presence or mo-
tion.
2. Example : PPC, FAX, Printer
■ Features
1. Reflective with OPIC Light Modulated Output
2. Highlights :
• Position pin to prevent mis-alignment.
• Snap-mount positioning hooks
(GP2A230LRSAF, GP2A231LRSAF)
• Includes additional screw fixing holes
(GP2A230LRS0F)
• Short focal distance
3. Key Parameters :
• Detecting distance : 1 to 9mm (White paper)
3 to 7mm (Black paper)
• Undetecting distance : over 27mm (White paper)
• Connector : GP2A230LRSAF ; Tyco Electronics AMP K.K.
(PN : 292133-3)
GP2A230LRS0F ; Tyco Electronics AMP K.K.
(PN : 292133-3)
GP2A231LRSAF ; Japan Molex K.K.
(PN : 53401-0335)
4. Lead free and RoHS directive compliant
* "OPIC"(Optical IC) is a trademark of the SHARP Corporation. An OPIC consists of a light-detecting element and a signal-
processing
Notice The content of data sheet is subject to change without prior notice.
In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP
devices shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device.
Sheet No.: D3-A05201EN
1 Date Oct. 3. 2005
© SHARP Corporation
1 page  
GP2A231LRSAF/GP2A230LRS0F/GP2A230LRSAF
■ Absolute Maximum Ratings
(Ta=25˚C )
Parameter
Symbol Rating
Unit
Supply voltage
VCC −0.5 to +7
V
Output voltage
*1 Output current
*2 Operating temperature
*2 Storage temperature
VO 7
V
IOL 50 mA
Topr −10 to +70 ˚C
Tstg −20 to +80 ˚C
∗1 Sink current refer to Fig.5.
∗2 The connector should be plugged in/out at normal temperature.
■ Electro-optical Characteristics
Parameter
Supply voltage
Current dissipation (I)
*3 Current dissipation (II)
Low level output voltage
High level output voltage
*4 Non detection distance
Symbol
VCC
ICC
ICCP
VOL
VOH
LLHL
*4 Detection distance
LHLS
LHLL
*5 Response time
*6 Acceptable illuminance
∗3 Refer to Fig.1.
∗4 Refer to Fig.2.
∗5 Refer to Fig.3.
∗6 Refer to Fig.4.
tPLH
tPHL
Ev1
Ev2
Condhitions
−
Smoothing value VCC=5V, RL=∞
Pulse peak value VCC=5V
VCC=5V, IOL=16mA, at detecting time
VCC=5V, RL=1kΩ, at non detecting time
KODAK Gray Cards, VCC=5V
KODAK Gray Cards, VCC=5V
Black paper, VCC=5V
KODAK Gray Cards, VCC=5V
Black paper, VCC=5V
VCC=5V
−
MIN.
4.75
−
−
−
4.5
−
−
−
9
7
−
−
3 000
1 500
TYP.
−
−
−
−
−
−
−
−
−
−
−
−
−
−
(Ta=25˚C)
MAX. Unit
5.25 V
20 mA
100 mA
0.4 V
−V
27 mm
1
3
mm
− mm
−
1 ms
1 ms
− lx
− lx
Reflective object
Black paper (black) : Standard reflective object (provided by SHARP Corporation)
KODAK Gray Cards (use the white side reflects about 90%)
: Standard reflective object (provided by SHARP Corporation)
PPC paper
: Standard reflective object (provided by SHARP Corporation)
Sheet No.: D3-A05201EN
5
5 Page 
■ Package specification
● Sleeve package
Package materials
Anti-static plastic bag : Polyethtylene
Moltopren : Urethane
Packing case : Corrugated fiberboard
GP2A231LRSAF/GP2A230LRS0F/GP2A230LRSAF
Package method
100 pcs of products shall be packaged in a plastic bag, Ends shall be sealed by stapler. The bottom ot the
packing case is covered with moltopren, and 3 plastic bags shall be put int the packing case.
Moltopren should be located after all product are settled (1 packing conteains 300 pcs).
Packing composition
Moltopren
Plastic bag
Packing case
Sheet No.: D3-A05201EN
11
11 Page | ||
| Páginas | Total 12 Páginas | |
| PDF Descargar | [ Datasheet GP2A230LRSAF.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| GP2A230LRSAF | Refl ective Photointerrupter | Sharp Electrionic |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |