|
|
PDF ADL5533 Data sheet ( Hoja de datos )
| Número de pieza | ADL5533 | |
| Descripción | Gain Block | |
| Fabricantes | Analog Devices | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de ADL5533 (archivo pdf) en la parte inferior de esta página. Total 9 Páginas | ||
|
No Preview Available !
www.DataSheet4U.com
Preliminary Technical Data
FEATURES
Fixed gain of 20 dB
Operation up to 1000 MHz
+37.3 dBm OIP3 at 70 MHz
Noise Figure 2.9 dB at 70 MHz
Input/output internally matched to 75 Ω
Temperature and power supply stable
Power supply: 5 V
Power supply current: 66 mA
1000 V ESD (Class 1C)
30 MHz to 1000 MHz
75 Ω Gain Block
ADL5533
FUNCTIONAL BLOCK DIAGRAM
NC 1
RFIN 2
NC 3
NC 4
ADL5533
8 NC
7 RFOUT
6 NC
5 CLIN
Figure 1. Block Diagram
GENERAL DESCRIPTION
The ADL5533 is a fixed-gain, linear amplifier that operates at
frequencies up to 1000 MHz. Intended for use in a wide variety
of applications, including broadband, CATV, cable modem and
FTTH.
The fixed gain of 20 dB is stable over frequency, temperature,
power supply and from device to device. OIP3 is +37.3 dBm
with an output compression point of +18.8 dBm and a noise
figure of 2.9 dB.
The ADL5533 is single-ended and internally matched to 75 Ω
with an input return loss of 10 dB. Only input/output ac-
coupling capacitors, a power supply decoupling capacitor and
external inductor are required for operation.
This amplifier operates with a supply voltage of +5V, consuming
66 mA of supply current.
The ADL5533, fabricated on a GaAs HBT process, and has an
ESD rating of 1000 V (Class 1C).The device is packaged in a 3mm
x 3mm LFCSP that uses an exposed paddle for excellent
thermal impedance and operates from −40°C to +85°C. A fully
populated evaluation board is available.
Rev. PrC 5/07
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarksandregisteredtrademarksarethepropertyoftheirrespectiveowners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700
www.analog.com
Fax: 781.461.3113
©2007 Analog Devices, Inc. All rights reserved.
1 page  
Preliminary Technical Data
PIN CONFIGURATION AND FUNCTION DESCRIPTIONS
ADL5533
NC1
RFIN 2
NC 3
NC 4
PIN 1
INDICATOR
ADL5533
TOP VIEW
(Not to Scale)
8 NC
7 RFOUT
6 NC
5 CLIN
Figure 2. Pin Configuration
Table 3. Pin Function Descriptions Single
Pin Mnemonic
No.
Description
2 RFIN
RF Input: Requires a DC blocking capacitor.
7 RFOUT
RF Output and Bias: DC bias is provided to this pin through an inductor. RF path requires a DC blocking
capacitor.
1, 3, 4, NC
6, 8
No Connect
5 CLIN
A 10 nF capacitor connected between pin 5 and ground provides decoupling for the on board linearizer.
Exposed
Paddle
Internally connected to GND. Solder to a low impedance ground plane
Rev. PrC 5/07 | Page 5 of 9
5 Page | ||
| Páginas | Total 9 Páginas | |
| PDF Descargar | [ Datasheet ADL5533.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| ADL5530 | DC to 1000 MHz IF Gain Block | Analog Devices |
| ADL5531 | 20 MHz to 500 MHz IF Gain Block | Analog Devices |
| ADL5532 | IF Gain Blocks | Analog Devices |
| ADL5533 | Gain Block | Analog Devices |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |