DataSheetWiki


XRD9816 fiches techniques PDF

Exar - (XRD9814 / XRD9816) 3-Channel 14/16-Bit Linear CCD/CIS Sensor Signal Processors

Numéro de référence XRD9816
Description (XRD9814 / XRD9816) 3-Channel 14/16-Bit Linear CCD/CIS Sensor Signal Processors
Fabricant Exar 
Logo Exar 





1 Page

No Preview Available !





XRD9816 fiche technique
www.DataSheet4U.com
XRD9814/XRD9816
3-Channel 14/16-Bit Linear
CCD/CIS Sensor Signal Processors
FEATURES
14-Bit (XRD9814) or 16-Bit (XRD9816)
A/D Converter
No Missing Codes
Triple-Channel, 2.5 MSPS Color Scan Mode
Single-Channel, 6 MSPS Monochrome Scan
Mode
Triple Correlated Double Sampler
Triple 10-Bit Programmable Gain Amplifier
Triple 10-Bit Offset Compensation DAC
Fully Differential or Single-Ended Inputs
CDS or S/H Mode
Inverting or Non-Inverting Mode
Internal Voltage Reference
Serial Control: On Data Bus or Separate Pins
December 1999-2
14-Bit or 8-Bit (Nibble) Parallel Data Output
(XRD9814)
16-Bit or 8-Bit (Nibble) Parallel Data Output
(XRD9816)
5V Operation and 3V I/O Compatibility
Low Power CMOS: 500mW @ 5V
APPLICATIONS
48-Bit Color Scanners (XRD9816)
42-Bit Color Scanners (XRD9814)
CCD or CIS Color Imagers
Gray Scale Scanners
Film Scanners
GENERAL DESCRIPTION
The XRD9814/9816 is a fully integrated, high-perfor-
mance analog signal processor/digitizer specifically
designed for use in 3-channel linear Charge Coupled
Device (CCD) and Contact Image Sensitive (CIS)
imaging applications.
Each channel of the XRD9814/9816 includes a Corre-
lated Double Sampler (CDS), Programmable Gain
Amplifier (PGA) and channel offset adjustment. After
gain and offset adjustment, the analog inputs are
sequentially sampled and digitized by an accurate 14/
16-bit A/D converter. The analog front-end can be
configured for inverting/non-inverting input, CDS or
sample-hold (S/H) mode, or AC/DC coupling,
making the XRD9814/9816 suitable for use in CCD,
CIS and other data acquisition applications.
The CDS mode of operation supports both line and
pixel-clamp modes and can be used to achieve signifi-
cant reduction in system 1/f noise and CCD reset
clock feed-through. In S/H mode the internal DC-
restore voltage clamp can be enabled or disabled to
support AC-coupled or DC inputs. Sampling mode,
10-bit PGA gain (1024 linear steps), 8-bit fine offset
adjustment (256 linear steps), 2-bit gross offset adjust-
ment and input signal polarity are all programmable
through a serial interface. PGA gain range is 1 to 10,
and channel offset range is -300mV to 300mV for fine
adjustment and additional -400mV to +200mV for
gross offset adjustment. The A/D Full-Scale Range
(FSR) is programmable to 2V or 3V.
ORDERING INFORMATION
Part No.
XRD9814ACV
XRD9816ACV
Package Type
48-Lead TQFP
48-Lead TQFP
Temperature Range
0°C to +70°C
0°C to +70°C
Rev. 1.00
EXAR Corporation, 48720 Kato Road, Fremont, CA 94538 (510) 668-7000 FAX (510) 668-7017 www.exar.com

PagesPages 30
Télécharger [ XRD9816 ]


Fiche technique recommandé

No Description détaillée Fabricant
XRD9814 (XRD9814 / XRD9816) 3-Channel 14/16-Bit Linear CCD/CIS Sensor Signal Processors Exar
Exar
XRD9814B (XRD9814B / XRD9816B) 3-Channel 14/16-Bit Linear CCD/CIS Sensor Signal Processors Exar
Exar
XRD9816 (XRD9814 / XRD9816) 3-Channel 14/16-Bit Linear CCD/CIS Sensor Signal Processors Exar
Exar
XRD9816B (XRD9814B / XRD9816B) 3-Channel 14/16-Bit Linear CCD/CIS Sensor Signal Processors Exar
Exar

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche