DataSheetWiki


XR16V2551 fiches techniques PDF

Exar Corporation - HIGH PERFORMANCE DUART

Numéro de référence XR16V2551
Description HIGH PERFORMANCE DUART
Fabricant Exar Corporation 
Logo Exar Corporation 





1 Page

No Preview Available !





XR16V2551 fiche technique
www.DataSheet4U.com
JUNE 2006
PRELIMINARY
XR16V2551
HIGH PERFORMANCE DUART WITH 16-BYTE FIFO AND POWERSAVE FEATURE
REV. P1.0.0
GENERAL DESCRIPTION
The XR16V25511 (V2551) is a high performance dual
universal asynchronous receiver and transmitter
(UART) with 16 byte TX and RX FIFOs. The device
operates from 2.25 to 3.6 volts with 5 Volt tolerant
inputs and is pin-to-pin compatible to Exar’s
XR16V2651 and XR16L2551. The device includes 2
additional capabilities over the XR16V2550: Intel and
Motorola data bus selection and a “PowerSave”
mode to further reduce sleep current to a minimum
during sleep mode. It supports Exar’s enhanced
features of selectable FIFO trigger level, automatic
hardware (RTS/CTS) and software flow control, and a
complete modem interface. An internal loopback
capability allows system diagnostics. Independent
programmable fractional baud rate generators are
provided in each channel to select data rates up to 16
Mbps at 3.3 Volt and 4X sampling clock. The V2551
is available in 48-pin TQFP and 32-pin QFN
packages.
NOTE: 1 Covered by U.S. Patent #5,649,122
APPLICATIONS
Portable Appliances
Telecommunication Network Routers
Ethernet Network Routers
Cellular Data Devices
Factory Automation and Process Controls
FEATURES
2.25 to 3.6 Volt Operation
5 Volt Tolerant Inputs
Pin-to-pin compatible to Exar’s XR16V2651 and the
XR16L2551
Two independent UART channels
Register set identical to 16V2550
Data rate of up to 16 Mbps at 3.3 V, and 12.5
Mbps at 2.5 V with 4X sampling rate
Fractional Baud Rate Generator
Transmit and Receive FIFOs of 16 bytes
Selectable TX and RX FIFO Trigger Levels
Automatic Hardware (RTS/CTS) Flow Control
Automatic Software (Xon/Xoff) Flow Control
Wireless Infrared (IrDA 1.0) Encoder/Decoder
Automatic sleep mode with wake-up interrupt
Full modem interface
PowerSave Feature reduces sleep current to 15 µA
Device Identification and Revision
Crystal oscillator (up to 32MHz) or external clock
(up to 64MHz) input
48-TQFP and 32-QFN packages
FIGURE 1. XR16V2551 BLOCK DIAGRAM
PwrSave
A2:A0
D7:D0
IOR# (VCC)
IOW# (R/W#)
CSA# (CS#)
CSB# (A3)
INTA (IRQ#)
INTB (logic 0)
TXRDYA#
TXRDYB#
RXRDYA#
RXRDYB#
Reset (Reset#)
16/68#
CLKSEL
Intel or
Motorola
Data Bus
Interface
*5 Volt Tolerant Inputs
UART Channel A
UART
Regs
BRG
16 Byte TX FIFO
TX & RX
IR
ENDEC
16 Byte RX FIFO
UART Channel B
(same as Channel A)
Crystal Osc/Buffer
2.25 to 3.6V VCC
GND
TXA, RXA, DTRA#,
DSRA#, RTSA#,
DTSA#, CDA#, RIA#,
OP2A#
TXB, RXB, DTRB#,
DSRB#, RTSB#,
CTSB#, CDB#, RIB#,
OP2B#
XTAL1
XTAL2
Exar Corporation 48720 Kato Road, Fremont CA, 94538 (510) 668-7000 FAX (510) 668-7017 www.exar.com

PagesPages 30
Télécharger [ XR16V2551 ]


Fiche technique recommandé

No Description détaillée Fabricant
XR16V2550 HIGH PERFORMANCE DUART Exar Corporation
Exar Corporation
XR16V2551 HIGH PERFORMANCE DUART Exar Corporation
Exar Corporation
XR16V2552 HIGH PERFORMANCE DUART Exar Corporation
Exar Corporation

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche