DataSheet.es    


PDF MAAPGM0018-DIE Data sheet ( Hoja de datos )

Número de pieza MAAPGM0018-DIE
Descripción 2W Ku-Band Power Amplifier
Fabricantes Tyco Electronics 
Logotipo Tyco Electronics Logotipo



Hay una vista previa y un enlace de descarga de MAAPGM0018-DIE (archivo pdf) en la parte inferior de esta página.


Total 6 Páginas

No Preview Available ! MAAPGM0018-DIE Hoja de datos, Descripción, Manual

2Wwww.DataSheet4U.com Ku-Band Power Amplifier
RO-P-DS-3009 - -
12.0-15.5 GHz
Preliminary Information
Features
12.0-15.5 GHz Operation
2 Watt Saturated Output Power Level
Variable Drain Voltage (4-10V) Operation
Excellent Input and Output VSWR
Self-Aligned MSAG® MESFET Process
12.0-15.5 GHz GaAs MMIC Amplifier
Primary Applications
Point-to-Point Radio
SatCom
Description
The MAAPGM0018-Die is a 3-stage 2 W power amplifier with on-
chip bias networks. This product is fully matched to 50 ohms on
both the input and output. It can be used as a power amplifier
stage or as a driver stage in high power applications.
Each device is 100% RF tested on wafer to ensure performance
compliance. The part is fabricated using M/A-COM’s repeatable,
high performance and highly reliable GaAs Multifunction Self-
Aligned Gate (MSAG®) MESFET Process. This process features
silicon nitride passivation and polyimide scratch protection.
Electrical Characteristics: TB = 40°C1, Z0 = 50, VDD = 8V, VGG = -2V, Pin = 18 dBm
Parameter
Symbol
Typical
Units
Bandwidth
f
12.0-15.5
GHz
Output Power
Power Added Efficiency
POUT
PAE
33
25
dBm
%
1-dB Compression Point
Small Signal Gain
P1dB
G
32
18
dBm
dB
Input VSWR
VSWR
1.5:1
Gate Current
Drain Current
2nd Harmonic
IGG
IDD
2f
<5
< 1.2
-40
mA
A
dBc
3rd Harmonic
3f
-55 dBc
1. TB = MMIC Base Temperature

1 page




MAAPGM0018-DIE pdf
2W Ku-Band Power Amplifier
RO-P-DS-3009 - - 5/6
MAAPGM0018-DIE
Mechanical Information
Chip Size: 4.404 x 3.380 x 0.075 mm (173 x 133 x 3 mils)
3.380mm.
3.228mm.
VGG
VD1, 2
VGG
VD3 3.218mm.
1.690mm.
1.690mm.
0.152mm.
0
VGG
0
VD1, 2
VGG
VD3 0.162mm.
Chip edge to bond pad dimensions are shown to the center of the bond
Figure 5. Die Layout
Bond Pad Dimensions
Pad
RF In and Out
DC Drain Supply Voltage VDD
DC Gate Supply Voltage VGG
Size (µm)
100 x 200
200 x 150
150 x 150
Size (mils)
4x8
8x6
6x6
Specifications subject to change without notice.
Customer Service: Tel. (888)-563-3949
„ North America: Tel. (800) 366-2266
„ Asia/Pacific: Tel.+81-44-844-8296, Fax +81-44-844-8298
„ Europe: Tel. +44 (1344) 869 595, Fax+44 (1344) 300 020
Visit www.macom.com for additional data sheets and product informVat1io.0n0.

5 Page










PáginasTotal 6 Páginas
PDF Descargar[ Datasheet MAAPGM0018-DIE.PDF ]




Hoja de datos destacado

Número de piezaDescripciónFabricantes
MAAPGM0018-DIE2W Ku-Band Power AmplifierTyco Electronics
Tyco Electronics

Número de piezaDescripciónFabricantes
SLA6805M

High Voltage 3 phase Motor Driver IC.

Sanken
Sanken
SDC1742

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

Analog Devices
Analog Devices


DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.


DataSheet.es    |   2020   |  Privacy Policy  |  Contacto  |  Buscar