|
|
Número de pieza | MAAP-000074-PED000 | |
Descripción | Amplifier | |
Fabricantes | Tyco Electronics | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de MAAP-000074-PED000 (archivo pdf) en la parte inferior de esta página. Total 8 Páginas | ||
No Preview Available ! www.DataSheet4U.com
Amplifier, Power, 8W
2.0-8.0 GHz
Features
♦ 8 Watt Saturated Output Power Level
♦ Eutectically mounted to Heat Spreader
♦ Next level integration is a Silver Epoxy-Based Process
♦ Variable Drain Voltage (6-10V) Operation
♦ MSAG™ Process
Description
The MAAP-000074-PED000 is a 2-stage 8W power amplifier with on-chip bias net-
works, eutettically mounted on a 10-mil thick Copper Molybdenum (CuMo) pedes-
tal. This product is fully matched to 50 ohms on both the input and output. It can be
used as a power amplifier stage or as a driver stage in high power applications.
Fabricated using M/A-COM’s repeatable, high performance and highly reliable
GaAs Multifunction Self-Aligned Gate (MSAG™)Process, each device is 100% RF
tested at the die-on-pedestal assembly level to ensure performance compliance.
M/A-COM’s MSAG™ process features robust silicon-like manufacturing processes,
planar processing of ion implanted transistors, multiple implant capability enabling
power, low-noise, switch and digital FETs on a single chip, and polyimide scratch
protection for ease of use with automated manufacturing processes. The use of
refractory metals and the absence of platinum in the gate metal formulation pre-
vents hydrogen poisoning when employed in hermetic packaging.
MAAP-000074-PED000
Rev —
Preliminary Datasheet
Primary Applications
♦ SatCom
♦ Radio Communications
♦ Radar
♦ Electronic Warfare
Also Available in:
Description
Die
Ceramic Package
Sample Board (Die) Sample Board (Pkg) Mechanical Sample (Die)
Part Number MAAPGM0074-DIE MAAP-000074-PKG001 MAAP-000074-SMB004 MAAP-000074-SMB001 MAAP-000074-MCH000
Electrical Characteristics: TB = 30°C1, Z0 = 50 Ω, VDD = 10V, IDQ = 2.1A2, Pin = 28 dBm, RG=40 Ω
Parameter
Symbol
Typical
Units
Bandwidth
f
2.0-8.0
GHz
Output Power
POUT
39 dBm
1-dB Compression Point
P1dB
38
dBm
Small Signal Gain
G
14 dB
Input VSWR
VSWR
1.7:1
Output VSWR
VSWR
2.2:1
Gate Current IGG 3.5 mA
Drain Current
2nd Harmonic, 2-4 GHz
IDD
2f
3.5 A
16.5 dBc
2nd Harmonic, 6-8 GHz
2f
72 dBc
1. TB = MMIC Base Temperature
2. Adjust VGG between –2.6 and –1.5V to achieve specified IDQ.
1
M/A-COM Inc. and its affiliates reserve the right to make changes to the
product(s) or information contained herein without notice. M/A-COM makes
no warranty, representation or guarantee regarding the suitability of its
products for any particular purpose, nor does M/A-COM assume any liability
whatsoever arising out of the use or application of any product(s) or
information.
• North America Tel: 800.366.2266 / Fax: 978.366.2266
• Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300
• Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298
Visit www.macom.com for additional data sheets and product information.
1 page Amplifier, Power, 8W
2.0-8.0 GHz
MAAP-000074-PED000
Rev —
Preliminary Datasheet
All Data is at 30ºC MMIC base temperature, CW stimulus, unless otherwise noted.
30 5.0
28 2 GHz
26 3 GHz
24 4 GHz
5 GHz
22 6 GHz
20 7 GHz
18 8 GHz
16
14
12
10
8
6
4
2
0
6 8 10 12 14 16 18 20 22 24 26 28 30
Input Power (dBm)
Figure 13. Power Added Efficiency vs. Input Power by Frequency at 8V and
25% IDSS
4.5
4.0
3.5
3.0
2.5
2.0 2 GHz
3 GHz
1.5 4 GHz
5 GHz
1.0 6 GHz
7 GHz
0.5 8 GHz
0.0
6
8 10 12 14 16 18 20 22 24 26 28 30
Input Power (dBm)
Figure 14. Drain Current vs. Input Power by Frequency at 8V and 25% IDSS
10 0
90
80
70
60
50
40 6 dBm
10 dBm
30 14 dBm
18 dBm
20 22 dBm
26 dBm
10 30 dBm
0
2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 6.0 6.5 7.0 7.5 8.0 8.5 9.0
Frequency (GHz)
Figure 15. Second Harmonic vs. Frequency by Input Power at 10V and 25% IDSS
Figure 16. Fixture used to characterize MAAPGM0074-DIE
under CW stimulus.
5
M/A-COM Inc. and its affiliates reserve the right to make changes to the
product(s) or information contained herein without notice. M/A-COM makes
no warranty, representation or guarantee regarding the suitability of its
products for any particular purpose, nor does M/A-COM assume any liability
whatsoever arising out of the use or application of any product(s) or
information.
• North America Tel: 800.366.2266 / Fax: 978.366.2266
• Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300
• Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298
Visit www.macom.com for additional data sheets and product information.
5 Page |
Páginas | Total 8 Páginas | |
PDF Descargar | [ Datasheet MAAP-000074-PED000.PDF ] |
Número de pieza | Descripción | Fabricantes |
MAAP-000074-PED000 | Amplifier | Tyco Electronics |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |