DataSheetWiki


AAT2856 fiches techniques PDF

AAT - High Current Charge Pump

Numéro de référence AAT2856
Description High Current Charge Pump
Fabricant AAT 
Logo AAT 





1 Page

No Preview Available !





AAT2856 fiche technique
AAT2856
High Current Charge Pump with
Dual LDO for BacklightApplications
General Description
Features
ChargePump
www.DataSheet4U.com
The AAT2856 is a highly integrated charge pump
with dual linear regulators optimized for systems
powered from lithium-ion/polymer batteries. The
charge pump provides power for white LED back-
light. Six backlight LEDs can be driven at up to
30mA. AnalogicTech's AS2Cwire™ (Advanced
Simple Serial Control™) single-wire interface is used
to enable, disable, and set the current to one of 32
levels for the backlight. Backlight current matching is
1% for uniform display brightness.
The AAT2856 offers two high-performance low-
noise MicroPower™ low dropout (LDO) linear regu-
lators. Both regulators use individual enable inputs
and each will supply up to 200mA load current. LDO
ground pin current is only 80µA, making the
AAT2856 ideal for battery-operated applications.
The AAT2856 is equipped with built-in short-circuit
and over-temperature protection. The soft start cir-
cuitry prevents excessive inrush current at start-up
and mode transitions.
The AAT2856 is available in a Pb-free TQFN44-28
package and operates over the -40°C to +85°C
ambient temperature range.
• Input Voltage Range: 2.7V to 5.5V
• Tri-Mode Charge Pump:
— Drives up to Six Backlight LEDs
— 32 Programmable Backlight Current
Settings Ranging from 115µA to 30mA
— 2MHz Switching Frequency
• Two Linear Regulators:
— 200mA Output Current
— 200mV Dropout Voltage
— Output Voltage Adjustable from 1.2V to
VBATTERY
— Output Auto-Discharge for Fast Shutdown
— Individual LDO Enable Inputs
• Built-In Thermal Protection
• Automatic Soft Start
• -40°C to +85°C Temperature Range
• TQFN44-28 Package
Applications
• Camera-Enabled Mobile Devices
• Digital Still Cameras
• Multimedia Mobile Phones
Typical Application
VBAT
CIN
4.7μF
ENABLE/SET
CBYP
0.1μF
C1 C2
1μF 1μF
C1+ C1-
IN
C2+ C2-
OUT
IN
AAT2856
ENS
BL1
BL2
BL3
BL4
BL5
BL6
REF
OUTA
FBA
COUT
2.2μF
VOUT
WLEDs
OSRAM LW M673
or equivalent
VOUTA
R2A
COUTA
R1A 2.2μF
EN_LDOA
EN_LDOB
ENA
ENB
AGND
OUTB
FBB
PGND
VOUTB
R2B
COUTB
R1B 2.2μF
2856.2007.06.1.0
1

PagesPages 22
Télécharger [ AAT2856 ]


Fiche technique recommandé

No Description détaillée Fabricant
AAT2856 High Current Charge Pump AAT
AAT

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche