|
|
PDF GP1A91LCJ00F Data sheet ( Hoja de datos )
| Número de pieza | GP1A91LCJ00F | |
| Descripción | Compact Transmissive Photointerrupter | |
| Fabricantes | Sharp Electrionic | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de GP1A91LCJ00F (archivo pdf) en la parte inferior de esta página. Total 11 Páginas | ||
|
No Preview Available !
GP1A91LCJ00F
GP1A91LCJ00F
Gap : 1.2mm, Slit : 0.23mm
*OPIC Output,
Compact Transmissive
Photointerrupter
■ Description
GP1A91LCJ00F is a compact-package, OPIC output,
transmissive photointerrupter, with opposing emitter and
detector in a molding that provides non-contact sensing.
The compact package series is a result of unique
technology combing transfer and injection molding.
This device has 2 positioning bosses on the detector
side, open collector for the deviceʼs output.
■ Agency approvals/Compliance
1. Compliant with RoHS directive
■ Applications
1. Detection of object presence or motion.
2. Example : printer, lens control for camera
■ Features
1. Transmissive with OPIC output
www.DataSheet4U.com
2. Highlights :
• Compact Size
3. Key Parameters :
• Gap Width : 1.2mm
• Slit Width (detector side): 0.23mm
• Package : 3.7×2.6×3.1mm
4. Lead free and RoHS directive compliant
* "OPIC"(Optical IC) is a trademark of the SHARP Corporation. An OPIC consists of a light-detecting element and a signal-
processing
Notice The content of data sheet is subject to change without prior notice.
In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP
devices shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device.
Sheet No.: D3-A01601EN
1 Date Oct. 3. 2005
© SHARP Corporation
1 page  
Fig.6 Relative Threshold Input Current
vs. Supply Voltage
1.2
IFHL Ta=25˚C
1 IFHL=1
at VCC=3V
0.8 IFLH
0.6
0.4
0.2
0
0 2.5 5 7.5 10
Supply voltage VCC (V)
Fig.8 Low Level, High Level Supply
Current vs. Supply Voltage (1)
2.2
ICCL:IF=5mA
2 ICCH:IF=0
1.8 Ta=−25˚C
RL=15kΩ
1.6
1.4
1.2
1 ICCL
0.8
0.6
0.4
ICCH
0.2
0
0 1 2 3 4 5 6 7 8 9 10
Supply voltage VCC (V)
Fig.10 Low Level, High Level Supply
Current vs. Supply Voltage (3)
2.2
ICCL:IF=5mA
2 ICCH:IF=0
1.8 Ta=85˚C
RL=15kΩ
1.6
1.4
1.2
1 ICCL
0.8
0.6
0.4
0.2 ICCH
0
0 1 2 3 4 5 6 7 8 9 10
Supply voltage VCC (V)
GP1A91LCJ00F
Fig.7 Relative Threshold Input Current
vs. Ambient Temperature
1.8
VCC=3V
1.6 IFHL=1
at Ta=25˚C
1.4
IFHL
1.2
IFLH
1
0.8
0.6
0.4
−25
0 25 50 75
Ambient temperature Ta (˚C)
100
Fig.9 Low Level, High Level Supply
Current vs. Supply Voltage (2)
2.2
ICCL:IF=5mA
2 ICCH:IF=0
1.8 Ta=25˚C
RL=15kΩ
1.6
1.4
1.2
1 ICCL
0.8
0.6
0.4
0.2 ICCH
0
0 1 2 3 4 5 6 7 8 9 10
Supply voltage VCC (V)
Fig.11 Low Level Output Voltage vs. Low
Level Output Current
220
IF=5mA
200 VCC=3V
180 Ta=25˚C
RL=15kΩ
160
140
120
100
80
60
40
20
0
0 0.3 0.6 0.9 1.2 1.5 1.8 2.1 2.4 2.7 3
Low level output current IOL (mA)
Sheet No.: D3-A01601EN
5
5 Page 
■ Important Notices
· The circuit application examples in this publication
are provided to explain representative applications of
SHARP devices and are not intended to guarantee any
circuit design or license any intellectual property rights.
SHARP takes no responsibility for any problems related
to any intellectual property right of a third party resulting
from the use of SHARP's devices.
· Contact SHARP in order to obtain the latest device
specification sheets before using any SHARP device.
SHARP reserves the right to make changes in the
specifications, characteristics, data, materials, structure,
and other contents described herein at any time
without notice in order to improve design or reliability.
Manufacturing locations are also subject to change
without notice.
· Observe the following points when using any devices
in this publication. SHARP takes no responsibility for
damage caused by improper use of the devices which
does not meet the conditions and absolute maximum
ratings to be used specified in the relevant specification
sheet nor meet the following conditions:
(i) The devices in this publication are designed for use
in general electronic equipment designs such as:
--- Personal computers
--- Office automation equipment
--- Telecommunication equipment [terminal]
--- Test and measurement equipment
--- Industrial control
--- Audio visual equipment
--- Consumer electronics
(ii) Measures such as fail-safe function and redundant
design should be taken to ensure reliability and safety
when SHARP devices are used for or in connection
GP1A91LCJ00F
with equipment that requires higher reliability such as:
--- Transportation control and safety equipment (i.e.,
aircraft, trains, automobiles, etc.)
--- Traffic signals
--- Gas leakage sensor breakers
--- Alarm equipment
--- Various safety devices, etc.
(iii) SHARP devices shall not be used for or in
connection with equipment that requires an extremely
high level of reliability and safety such as:
--- Space applications
--- Telecommunication equipment [trunk lines]
--- Nuclear power control equipment
--- Medical and other life support equipment (e.g.,
scuba).
· If the SHARP devices listed in this publication fall
within the scope of strategic products described in the
Foreign Exchange and Foreign Trade Law of Japan, it
is necessary to obtain approval to export such SHARP
devices.
· This publication is the proprietary product of SHARP
and is copyrighted, with all rights reserved. Under
the copyright laws, no part of this publication may be
reproduced or transmitted in any form or by any means,
electronic or mechanical, for any purpose, in whole or in
part, without the express written permission of SHARP.
Express written permission is also required before any
use of this publication may be made by a third party.
· Contact and consult with a SHARP representative
if there are any questions about the contents of this
publication.
[H141]
Sheet No.: D3-A01601EN
11
11 Page | ||
| Páginas | Total 11 Páginas | |
| PDF Descargar | [ Datasheet GP1A91LCJ00F.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| GP1A91LCJ00F | Compact Transmissive Photointerrupter | Sharp Electrionic |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |