DataSheetWiki


DR65-0002 fiches techniques PDF

Tyco Electronics - Linear Driver

Numéro de référence DR65-0002
Description Linear Driver
Fabricant Tyco Electronics 
Logo Tyco Electronics 





1 Page

No Preview Available !





DR65-0002 fiche technique
www.DataSheet4U.com
Linear Driver for PIN Diode
Attenuators
V 4.00
Features
n Linearizes PIN Diode Attenuators Over a Wide
Attenuation Range
n Output Currents up to 12 mA
n Operates with a Single Supply Voltage of +3V to +12V
n Low Quiescent Currents
n Single Control Voltage
n SOW-16, Wide Body Plastic Package
n Test Boards are Available
n Tape and Reel Packaging Available
SOW-16
Description
M/A-COM's DR65-0002 is a break point free driver that
produces a logarithmic output current suitable for
linearizing PIN diode based shunt attenuators. This driver,
in conjunction with customer defined external components,
produces a linear transfer function (dB/V) between the
input control voltage of the driver and the attenuation
output of the PIN attenuator. The DR65-0002 has been
optimized for linearizing M/A-COM’s AT10-0009 or
AT10-0017 attenuators, but will function well with most
types of cathode grounded, PIN attenuators. The driver is
packaged in a SOW-16 package for commercial SMT
applications. A typical schematic for a 30 dB, 7.5 dB/V
linear attenuator is shown in Figure 1.
Circuit Description:
(Reference Figures 1 and 2)
The input divider, R1 and the sum of R2 and R3, sets the
overall transfer function of the circuit. To increase the
transfer function, decrease the Control Voltage and the
value of R1. Varying the value of R4 will optimize the
linearity of the circuit. One can achieve a very linear
transfer function (<± 1 dB/V) by driving the attenuator over
a smaller portion of its dynamic range. In the case of the
AT10-0009 and AT10-0017 attenuators, this would be
limited to a dynamic range of 28 and 25 dB, respectively.
Temperature compensation is a function temperature
coefficient of the thermistor, R3, and the ratio of R2 to R3,
and can only be optimized once the transfer function and
linearity component values have been established.
Package outline conforms to JEDEC standard MS-013AA
Figure 1
+Vcc
Vcontrol
(0 to 4V)
R1
39K
R2 680
14
4
IN
C1
.01 µF
DR65-0002
12
R3
(PTCT)
330 R4
3
360
REF
5
RFin
1,3,4
2
16,14,13
7 ATTENNUATOR
5,6,8
10
9,11,12
NOTES:
TRANSFER FUNCTION IS 7.5 dB/V
Vcontrol IS 0V to 4.0V
+Vcc IS 5.0V ± 5%
R3 IS A POSITIVE TEMPERATURE COEFFICIENT THERMISTOR
ATTENUATOR IS AT10-0009 OR AT10-0017
RFoutput
SCHEMATIC
LINEAR ATTENUATOR

PagesPages 2
Télécharger [ DR65-0002 ]


Fiche technique recommandé

No Description détaillée Fabricant
DR65-0001 Quad Driver Tyco Electronics
Tyco Electronics
DR65-0002 Linear Driver Tyco Electronics
Tyco Electronics
DR65-0003 SPDT PIN Diode Driver Tyco Electronics
Tyco Electronics
DR65-0008 Quad Positive Voltage Driver Tyco Electronics
Tyco Electronics

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche