|
|
PDF MA4PBL027 Data sheet ( Hoja de datos )
| Número de pieza | MA4PBL027 | |
| Descripción | HMICTM Silicon Beam-Lead PIN Diodes | |
| Fabricantes | Tyco Electronics | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de MA4PBL027 (archivo pdf) en la parte inferior de esta página. Total 5 Páginas | ||
|
No Preview Available !
HMICTM Silicon Beam-Lead PIN Diodes
Features
• Beam-Lead Device
• No Wirebonds Required
• Rugged Silicon-Glass Construction
• Silicon Nitride Passivation
• Polymer Scratch and Impact Protection
• Low Parasitic Capacitance and Inductance
• Ultra Low Capacitance < 40 fF
• Excellent RC Product < 0.10 pS
• High Switching Cutoff Frequency > 110 GHz
• 110 Nanosecond Minority Carrier Lifetime
• Driven by Standard +5V TTL PIN Diode Driver
Description and Applications
This device is a Silicon-Glass Beam-Lead PIN diode
fabricated with M/A-COM’s patented HMICTM process. This
device features one silicon pedestal embedded in a
low loss, low dispersion glass which supports the
beam-leads. The diode is formed on the top of the
pedestal, and airbridges connect the diode to the
beam-leads. The topside is fully encapsulated with
silicon nitride and has an additional polymer layer for
scratchwww.DataSheet4U.com and impact protection. These protective
coatings prevent damage to the junction and the
air-bridges during handling and assembly.
The diodes themselves exhibit low series resistance,
low capacitance, and extremely fast switching
speed.
The ultra low capacitance of this device allows use
through W-band (110 GHz) applications. The low
RC product and low profile of the PIN diodes makes
it ideal for use in microwave and millimeter wave
switch designs, where lower insertion loss and
higher isolation are required. The + 10 mA ( low loss
state ) and the 0v ( isolation state ) bias of the
diodes allows the use a simple + 5V TTL gate driver.
These diodes are used as switching arrays on radar
systems, high-speed ECM circuits, optical switching
networks, instrumentation, and other wideband
multi-throw switch assemblies.
1
M/A-COM Inc. and its affiliates reserve the right to make changes to the
product(s) or information contained herein without notice. M/A-COM makes
no warranty, representation or guarantee regarding the suitability of its
products for any particular purpose, nor does M/A-COM assume any liability
whatsoever arising out of the use or application of any product(s) or
information.
Case Style ODS-1302
Cathode
MA4PBL027
V1
A
F DB
side
Dimension
A
B
C
D
E
F
E
top
Mils
9.3 +/- 2.0
15.3 +/- 2.0
9.3 +/- 2.0
12.6 +/- 2.0
5.5 +/- 2.0
5.0 +/- 1.0
C
mm
0.24 +/- 0.05
0.39 +/- 0.05
0.24 +/- 0.05
0.32 +/- 0.05
0.14 +/- 0.05
0.13 +/- 0.03
Absolute Maximum Ratings @ TA = +25 °C
(unless otherwise specified)1
Parameter
Maximum Rating
Forward Current
100 mA
Reverse Voltage
90 V
Operating Temperature
-55 °C to +125 °C
Storage Temperature
-55 °C to +150 °C
JunctionTemperature
+175 °C
RF C.W. Incident Power
30 dBm C.W.
RF & DC Dissipated Power
150 mW
Mounting Temperature
+235°C for 10 sec.
1. Operation of this device above any one of these parameters
may cause permanent damage.
• North America Tel: 800.366.2266 / Fax: 978.366.2266
• Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300
• Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298
Visit www.macom.com for additional data sheets and product information.
1 page  
HMICTM Silicon Beam-Lead PIN Diodes
MA4PBL027 Microwave Model
C parasitic = 0.08 pF
Input
Ls
Notes :
CT(V) = Cj (V) + Cparasitic ( Reverse Bias State )
Rs( I ) = Rj ( I ) + Rc ( Forward Bias State )
Rs ( V ) = Rj ( V ) = Rp ( V ) ( Reverse Bias State )
Rs
Cj
MA4PBL027
V1
Output
5
M/A-COM Inc. and its affiliates reserve the right to make changes to the
product(s) or information contained herein without notice. M/A-COM makes
no warranty, representation or guarantee regarding the suitability of its
products for any particular purpose, nor does M/A-COM assume any liability
whatsoever arising out of the use or application of any product(s) or
information.
• North America Tel: 800.366.2266 / Fax: 978.366.2266
• Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300
• Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298
Visit www.macom.com for additional data sheets and product information.
5 Page | ||
| Páginas | Total 5 Páginas | |
| PDF Descargar | [ Datasheet MA4PBL027.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| MA4PBL027 | HMICTM Silicon Beam-Lead PIN Diodes | Tyco Electronics |
| MA4PBL027 | HMIC Silicon Beam Lead PIN Diode |  MA-COM |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |