DataSheetWiki


DAC124S085 fiches techniques PDF

National Semiconductor - 12-Bit Micro Power QUAD Digital-to-Analog Converter

Numéro de référence DAC124S085
Description 12-Bit Micro Power QUAD Digital-to-Analog Converter
Fabricant National Semiconductor 
Logo National Semiconductor 





1 Page

No Preview Available !





DAC124S085 fiche technique
January 2007
DAC124S085
12-Bit Micro Power QUAD Digital-to-Analog Converter with
Rail-to-Rail Output
General Description
The DAC124S085 is a full-featured, general purpose QUAD
12-bit voltage-output digital-to-analog converter (DAC) that
can operate from a single +2.7V to 5.5V supply and consumes
1.1 mW at 3V and 2.4 mW at 5V. The DAC124S085 is pack-
aged in 10-lead LLP and MSOP packages. The 10-lead LLP
package makes the DAC124S085 the smallest QUAD DAC
in its class. The on-chip output amplifier allows rail-to-rail out-
put swing and the three wire serial interface operates at clock
rates up to 40 MHz over the entire supply voltage range.
Competitive devices are limited to 25 MHz clock rates at sup-
ply voltages in the 2.7V to 3.6V range. The serial interface is
compatible with standard SPI, QSPI, MICROWIRE and
DSP interfaces.
The reference for the DAC124S085 serves all four channels
and can vary in voltage between 1V and VA, providing the
widest possible output dynamic range. The DAC124S085 has
a 16-bit input shift register that controls the outputs to be up-
dated, the mode of operation, the powerdown condition, and
the binary input data. All four outputs can be updated simul-
taneously or individually depending on the setting of the two
mode of operation bits.
A power-on reset circuit ensures that the DAC output powers
up to zero volts and remains there until there is a valid write
to the device. A power-down feature reduces power con-
sumption to less than a microWatt with three different termi-
nation options.
The low power consumption and small packages of the
DAC124S085 make it an excellent choice for use in battery
operated equipment.
The DAC124S085 is one of a family of pin compatible DACs,
including the 8-bit DAC084S085 and the 10-bit DAC104S085.
The DAC124S085 operates over the extended industrial tem-
perature range of −40°C to +105°C.
Features
Guaranteed Monotonicity
Low Power Operation
Rail-to-Rail Voltage Output
Power-on Reset to 0V
Simultaneous Output Updating
Wide power supply range (+2.7V to +5.5V)
Industry's Smallest Package
Power Down Modes
Key Specifications
Resolution
INL
DNL
Settling Time
Zero Code Error
Full-Scale Error
Supply Power
Normal
Power Down
12 bits
±8 LSB (max)
+0.7 / −0.5 LSB (max)
8.5 µs (max)
+15 mV (max)
−0.75 %FS (max)
1.1 mW (3V) / 2.4 mW (5V) typ
0.3 µW (3V) / 0.8 µW (5V) typ
Applications
Battery-Powered Instruments
Digital Gain and Offset Adjustment
Programmable Voltage & Current Sources
Programmable Attenuators
Pin Configuration
20173201
SPIis a trademark of Motorola, Inc.
© 2007 National Semiconductor Corporation
201732
20173202
www.national.com

PagesPages 20
Télécharger [ DAC124S085 ]


Fiche technique recommandé

No Description détaillée Fabricant
DAC124S085 12-Bit Micro Power Quad Digital-to-Analog Converter With Rail-to-Rail Output (Rev. F) Texas Instruments
Texas Instruments
DAC124S085 12-Bit Micro Power QUAD Digital-to-Analog Converter National Semiconductor
National Semiconductor

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche