DataSheet.es    


PDF EL5306 Data sheet ( Hoja de datos )

Número de pieza EL5306
Descripción (EL5106 / EL5306) 350MHz Fixed Gain Amplifiers
Fabricantes Intersil Corporation 
Logotipo Intersil Corporation Logotipo



Hay una vista previa y un enlace de descarga de EL5306 (archivo pdf) en la parte inferior de esta página.


Total 11 Páginas

No Preview Available ! EL5306 Hoja de datos, Descripción, Manual

®
Data Sheet
EL5106, EL5306
November 3, 2005
FN7357.4
350MHz Fixed Gain Amplifiers with Enable
The EL5106 and EL5306 are fixed gain amplifiers with a
bandwidth of 350MHz. This makes these amplifiers ideal for
today’s high speed video and monitor applications. They
feature internal gain setting resistors and can be configured
in a gain of +1, -1 or +2.
With a supply current of just 1.5mA and the ability to run
from a single supply voltage from 5V to 12V, these amplifiers
are also ideal for handheld, portable or battery powered
equipment.
The EL5106 and EL5306 also incorporate an enable and
disable function to reduce the supply current to 25µA typical
per amplifier. Allowing the CE pin to float or applying a low
logic level will enable the amplifier.
The EL5106 is offered in the 6 Ld SOT-23 and the industry-
standard 8 Ld SO packages and the EL5306 is available in
the 16 Ld SO and 16 Ld QSOP packages. All operate over
the industrial temperature range of -40°C to +85°C.
Features
• Pb-free plus anneal available (RoHS compliant)
• Gain selectable (+1, -1, +2)
• 350MHz -3dB BW (AV = 2)
• 1.5mA supply current per amplifier
• Fast enable/disable
• Single and dual supply operation, from 5V to 12V
• Available in SOT-23 packages
• 450MHz, 3.5mA product available (EL5108 & EL5308)
Applications
• Battery powered equipment
• Handheld, portable devices
• Video amplifiers
• Cable drivers
• RGB amplifiers
Ordering Information
PART TAPE &
PART NUMBER MARKING REEL PACKAGE
EL5106IW-T7 t
7” 6 Ld SOT-23
(3K pcs)
EL5106IW-T7A t
7” 6 Ld SOT-23
(250 pcs)
EL5106IWZ-T7 BAFA
(See Note)
7” 6 Ld SOT-23
(3K pcs) (Pb-free)
EL5106IWZ-T7A BAFA
(See Note)
EL5106IS
5106IS
EL5106IS-T7 5106IS
EL5106IS-T13 5106IS
EL5106ISZ
(See Note)
5106ISZ
EL5106ISZ-T7 5106ISZ
(See Note)
EL5106ISZ-T13 5106ISZ
(See Note)
EL5306IS
EL5306IS
7” 6 Ld SOT-23
(250 pcs) (Pb-free)
- 8 Ld SO
7” 8 Ld SO
13” 8 Ld SO
- 8 Ld SO
(Pb-free)
7” 8 Ld SO
(Pb-free)
13” 8 Ld SO
(Pb-free)
- 16 Ld SO
(0.150”)
EL5306IS-T7 EL5306IS
EL5306IS-T13 EL5306IS
7” 16 Ld SO
(0.150”)
13” 16 Ld SO
(0.150”)
PKG.
DWG. #
MDP0038
MDP0038
MDP0038
MDP0038
MDP0027
MDP0027
MDP0027
MDP0027
MDP0027
MDP0027
MDP0027
MDP0027
MDP0027
Ordering Information (Continued)
PART TAPE &
PART NUMBER MARKING REEL PACKAGE
PKG.
DWG. #
EL5306ISZ
(See Note)
EL5306ISZ - 16 Ld SO
(0.150”)
(Pb-free)
MDP0027
EL5306ISZ-T7 EL5306ISZ 7” 16 Ld SO
(See Note)
(0.150”)
(Pb-free)
MDP0027
EL5306ISZ-T13 EL5306ISZ 13” 16 Ld SO
(See Note)
(0.150”)
(Pb-free)
MDP0027
EL5306IU
5306IU
- 16 Ld QSOP MDP0040
EL5306IU-T7 5306IU
7” 16 Ld QSOP MDP0040
EL5306IU-T13 5306IU
13” 16 Ld QSOP MDP0040
EL5306IUZ
(See Note)
5306IUZ
- 16 Ld QSOP MDP0040
(Pb-free)
EL5306IUZ-T7 5306IUZ
(See Note)
7” 16 Ld QSOP MDP0040
(Pb-free)
EL5306IUZ-T13 5306IUZ
(See Note)
13” 16 Ld QSOP MDP0040
(Pb-free)
NOTE: Intersil Pb-free plus anneal products employ special Pb-free
material sets; molding compounds/die attach materials and 100%
matte tin plate termination finish, which are RoHS compliant and
compatible with both SnPb and Pb-free soldering operations. Intersil
Pb-free products are MSL classified at Pb-free peak reflow
temperatures that meet or exceed the Pb-free requirements of
IPC/JEDEC J STD-020.
1
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 1-888-468-3774 | Intersil (and design) is a registered trademark of Intersil Americas Inc.
Copyright © Intersil Americas Inc. 2002-2005. All Rights Reserved.
All other trademarks mentioned are the property of their respective owners.

1 page




EL5306 pdf
Typical Performance Curves
EL5106, EL5306
5 VS=±5V
RL=150
3
1 AV = -1
-1 AV = 2
-3 AV = 1
-5
100K
1M
10M
100M
FREQUENCY (Hz)
FIGURE 1. FREQUENCY RESPONSE
1G
1.6
RL = 150
1.2
0.8
AV = -1
AV = 1, 2
0.4
0
1 10 100 1K
FREQUENCY (Hz)
FIGURE 3. GROUP DELAY vs FREQUENCY
11 AV=+2
VS=±5V
9 RL=150
7
5
3
CL = 10pF
CL = 6.8pF
CL = 2.2pF
CL = 0pF
1
100K
1M
10M
100M
FREQUENCY (Hz)
1G
FIGURE 2. FREQUENCY RESPONSE FOR VARIOUS CL
450
RL = 150
350
AV = -1
AV = 2
250
AV = 1
150
4.5 5 5.5 6 6.5 7 7.5 8 8.5 9 9.5 10 10.5 11
FREQUENCY (Hz)
FIGURE 4. BANDWIDTH vs SUPPLY VOLTAGE
1
RL = 150
0.8
0.6
0.4
0.2
AV = -1
AV = 2
AV = 1
0
4.5 5 5.5 6 6.5 7 7.5 8 8.5 9 9.5 10 10.5 11
VS (V)
FIGURE 5. PEAKING vs SUPPLY VOLTAGE
0
-10
-20
-30
-40
-50
-60
-70
-80
1K
PSRR+
PSRR-
10K 100K
1M
10M
FREQUENCY (Hz)
100M
FIGURE 6. POWER SUPPLY REJECTION RATIO vs
FREQUENCY
5

5 Page





EL5306 arduino
QSOP Package Outline Drawing
EL5106, EL5306
NOTE: The package drawings shown here may not be the latest versions. To check the latest revision, please refer to the Intersil website at
http://www.intersil.com/design/packages/index.asp
All Intersil U.S. products are manufactured, assembled and tested utilizing ISO9000 quality systems.
Intersil Corporation’s quality certifications can be viewed at www.intersil.com/design/quality
Intersil products are sold by description only. Intersil Corporation reserves the right to make changes in circuit design, software and/or specifications at any time without
notice. Accordingly, the reader is cautioned to verify that data sheets are current before placing orders. Information furnished by Intersil is believed to be accurate and
reliable. However, no responsibility is assumed by Intersil or its subsidiaries for its use; nor for any infringements of patents or other rights of third parties which may result
from its use. No license is granted by implication or otherwise under any patent or patent rights of Intersil or its subsidiaries.
For information regarding Intersil Corporation and its products, see www.intersil.com
11

11 Page







PáginasTotal 11 Páginas
PDF Descargar[ Datasheet EL5306.PDF ]




Hoja de datos destacado

Número de piezaDescripciónFabricantes
EL5300200MHz Slew Enhanced VFAIntersil Corporation
Intersil Corporation
EL5302(EL5x0x) Slew Enhanced VFAsIntersil Corporation
Intersil Corporation
EL5304700MHz Slew Enhanced VFAIntersil Corporation
Intersil Corporation
EL5306(EL5106 / EL5306) 350MHz Fixed Gain AmplifiersIntersil Corporation
Intersil Corporation

Número de piezaDescripciónFabricantes
SLA6805M

High Voltage 3 phase Motor Driver IC.

Sanken
Sanken
SDC1742

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

Analog Devices
Analog Devices


DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.


DataSheet.es    |   2020   |  Privacy Policy  |  Contacto  |  Buscar