|
|
PDF NPA Data sheet ( Hoja de datos )
| Número de pieza | NPA | |
| Descripción | NON-POLAR ALUMINUM ELECTROLYTIC | |
| Fabricantes | NTE Electronics | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de NPA (archivo pdf) en la parte inferior de esta página. Total 2 Páginas | ||
|
No Preview Available !
NON−POLAR ALUMINUM ELECTROLYTIC
NPR, NPA (Non−Polarized) SERIES
SUBMINIATURE N0N−POLARIZED
(NPR: Radial Leads, NPA: Axial Leads)
The NPR and NPA Series subminiature aluminum electrolytic
capacitors are especially designed for use in circuits whose po-
larity is reversed or unknown or in crossover networks which do
not require tough characteristic requirements.
RATINGS
Capacitance Range: 0.47μf to 1000μf
Tolerance: ±20%
Voltage Range: 16V to 100V
PERFORMANCE SPECIFICATIONS
Operating Temperature Range:
−40°C to +85°C (−40°F to +185°F)
Leakage Current: I ≤ 0.002CV + 3μA (measured after
5 minutes of applied voltage)
MECHANICAL SPECIFICATIONS
Lead Solderability:
Meets the requirements of MIL−STD 202, Method 208
Marking:
Consists of series type, nominal capacitance, rated
voltage, temperature range, anode and/or cathode
identification, vendor identification.
Recommended Cleaning Solvents:
Methanol, isopropanol ethanol, isobutanol, petroleum
ether, propanol and/or commercial detergents. Halo-
genated hydrocarbon cleaning agents such as Freon
(MF, TF, or TC), trichloroethylene, trichloroethane, or
methylchloride are not recommended as they may
damage the capacitor.
CASE SIZES AND DIMENSIONS:
I = Leakage Current (μA)
C = Nominal Capacitance (μf)
V = Rated Voltage (V)
Capacitance Tolerance (M): ±20%
measured at 20°C (68°F), 120Hz
Dissipation Factor: measured at +20°C (+68°F),120HZ
Rated Voltage
16 25 50 63 100
0.1μf to 1000μf
0.16 0.12 0.08 0.06 0.06
Impedance Ratio at Low Temperature: 120HZ
Comparison Z WV 16 25 50 63
100
Z @ −25°C (−13°F)/
Z @ +20°C (+68°F)
2
1.5 1.5
2
2
Z @ −40°C (−40°F)/
Z @ +20°C (+68°F)
3
2
2
4
4
Surge Voltage:
DC Rated Voltage 16 25 50 63 100
Surge Voltage
20 32 63 79 125
NPR SERIES
Insulating
Sleeve
18.0 Min
d Ø A ±0.5
L
L’ 5.0 Min
DØ
D’ Ø
D’ Ø = D Ø + 0.5 Max L’ = L + 1.0 Max at D Ø ≤ 8.0 L’ = L + 2.0 Max at D Ø ≥ 10.0
NPA SERIES
dØ
L
Insulating
Sleeve
Load Life: 1000 ±12Hrs @ +85°C (+185°F),
at rated voltage
Leakage Current: Within values specified above
Dissipation Factor: Within ±150% of specified value
Capacitance Change Max: ±15% of initial value
Rated Voltage
Capacitance Change Max
160V to 450V
Within 30% of the initial value
2.3 Max
35.0 Min L’ 35.0 Min
DØ
D’ Ø
D’ Ø = D Ø + 0.5 Max L’ = L + 1.0 Max at D Ø ≤ 8.0 L’ = L + 2.0 Max at D Ø ≥ 10.0
Shelf Life: 1000 Hrs @ +85°C (+185°F),
no voltage applied
Leakage Current: Within values specified above
Dissipation Factor: Within ±150% of specified value
Capacitance Change Max: Within ±15% of initial value
ORDERING INFORMATION
NPR 47
Series
Capacitance
Tolerance
Voltage
M
50
NTE Electronics, Inc. D Voice (973) 748−5089 D FAX (973) 748−6224 D http://www.nteinc.com
7
1 page | ||
| Páginas | Total 2 Páginas | |
| PDF Descargar | [ Datasheet NPA.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| NP-BNCP | RFCO-AXIAL CONNECTORS |  Hirose Electric |
| NP-SAMC | 50A / Ultra Low Capacitance TSPD |  ON Semiconductor |
| NP-SDMC | High Current TSPD | ON Semiconductor |
| NP00402100F1HNB | Ceramic Chip Capacitors NPO Dielectric |  Cinetech Industrial |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |