|
|
PDF XR1007-QD Data sheet ( Hoja de datos )
| Número de pieza | XR1007-QD | |
| Descripción | GaAs Receiver | |
| Fabricantes | Mimix Broadband | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de XR1007-QD (archivo pdf) en la parte inferior de esta página. Total 6 Páginas | ||
|
No Preview Available !
10.0-18.0 GHz GaAs Receiver
QFN, 7x7 mm
July 2006 - Rev 14-Jul-06
Features
Integrated LNA, LO Buffer, Image Reject Mixer
7x7 mm, QFN
+2.0 dBm LO Drive Level
2.7 dB Noise Figure
20.0 dB Image Rejection
100% RF, DC and Noise Figure Testing
General Description
Mimix Broadband’s 10.0-18.0 GHz GaAs packaged receiver has a
noise figure of 2.7 dB and 20.0 dB image rejection across the band.
This device is a two stage balanced LNA followed by an image reject
sub-harmonic anti-parallel diode mixer and includes an integrated
LO buffer amplifer.The image reject mixer eliminates the need for a
bandpass filter after the LNA to remove thermal noise at the image
frequency. I and Q mixer outputs are provided and an external 90
degree hybrid is required to select the desired sideband. This device
uses Mimix Broadband’s 0.15 µm GaAs PHEMT device model
technology, and is based upon electron beam lithography to ensure
high repeatability and uniformity.The device comes in a 7x7 mm
QFN Surface Mount Laminate Package offering excellent RF and
thermal properties and is RoHS compliant. This device is well suited
www.DataSheet4U.com for Millimeter-wave Point-to-Point Radio, LMDS, SATCOM and VSAT
applications.
R1007-QD
Absolute Maximum Ratings
Supply Voltage (Vd)
Supply Current (Id1,Id2)
Gate Bias Voltage (Vg)
Input Power (RF Pin)
Storage Temperature (Tstg)
Operating Temperature (Ta)
Channel Temperature (Tch)
+5.0 VDC
200, 250 mA
+0.3 VDC
+17 dBm
-65 to +165 OC
-55 to MTTF Table3
MTTF Table3
(3) Channel temperature affects a device's MTTF. It is
recommended to keep channel temperature as low as
possible for maximum life.
Electrical Characteristics (Ambient Temperature T = 25o C)
Parameter
Units Min. Typ. Max.
Frequency Range (RF) Upper Side Band
GHz 10.0 - 18.0
Frequency Range (LO)
GHz 8.0
- 20.0
Frequency Range (IF)
GHz DC - 4.0
Input Return Loss RF (S11)
dB - 15.0 -
Small Signal Conversion Gain RF/IF (S21)2
dB - 15.0 -
LO Input Drive (PLO)
dBm - +2.0 -
Image Rejection2
dBc - 20.0 -
Noise Figure (NF)2
dB - 2.7 -
Isolation LO/RF @ LOx1/LOx2
dB - 40.0 -
Input Third Order Intercept (IIP3)1,2
dBm - +4.0 -
Drain Bias Voltage (Vd1)
VDC - +4.0 +4.5
Drain Bias Voltage (Vd2)
VDC - +4.0 +4.5
Gate Bias Voltage (Vg1,2)
VDC -1.2 -0.3 +0.1
Supply Current (Id1) (Vd1=4.0V, Vg=-0.3V Typical)
mA - 80 120
Supply Current (Id2) (Vd2=4.0V,Vg=-0.3V Typical)
mA - 100 150
(1) Measured using constant current.
(2) Measured using LO Input drive level of +2.0 dBm.
Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099
Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com
Page 1 of 6
Characteristic Data and Specifications are subject to change without notice. ©2006 Mimix Broadband, Inc.
Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept
their obligation to be compliant with U.S. Export Laws.
1 page  
10.0-18.0 GHz GaAs Receiver
QFN, 7x7 mm
July 2006 - Rev 14-Jul-06
App Note [3] USB/LSB Selection -
LSB USB
R1007-QD
For Upper Side Band operation (USB):
With IF1 and IF2 connected to the
direct port (0º) and coupled port (90º)
respectively as shown in the diagram,
the USB signal will reside on the
isolated port. The input port must be
loaded with 50 ohms.
IF2 IF1
An alternate method of Selection of USB or LSB:
USB
For Lower Side Band operation (LSB):
With IF1 and IF2 connected to the
direct port (0º) and coupled port (90º)
respectively as shown in the diagram,
the LSB signal will reside on the input
port. The isolated port must be loaded
with 50 ohms.
LSB
In Phase Combiner
-90o
IF2
IF1
In Phase Combiner
-90o
IF2 IF1
Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099
Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com
Page 5 of 6
Characteristic Data and Specifications are subject to change without notice. ©2006 Mimix Broadband, Inc.
Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept
their obligation to be compliant with U.S. Export Laws.
5 Page | ||
| Páginas | Total 6 Páginas | |
| PDF Descargar | [ Datasheet XR1007-QD.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| XR1007-QD | GaAs Receiver | Mimix Broadband |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |