DataSheetWiki


XR1001 fiches techniques PDF

Mimix Broadband - GaAs MMIC Receiver

Numéro de référence XR1001
Description GaAs MMIC Receiver
Fabricant Mimix Broadband 
Logo Mimix Broadband 





1 Page

No Preview Available !





XR1001 fiche technique
33.0-40.0 GHz GaAs MMIC
Receiver
May 2005 - Rev 13-May-05
Features
Sub-Harmonic Receiver
9.0 dB Conversion Gain
4.0 dB Noise Figure
12.0 dB Image Rejection
100% On-Wafer RF, DC and Noise Figure Testing
100% Visual Inspection to MIL-STD-883
Method 2010
Chip Device Layout
R1001
R1001
General Description
Mimix Broadbands 33.0-40.0 GHz GaAs MMIC receiver has a small
signal conversion gain of 9.0 dB with a noise figure of 4.0 dB and 12.0
dB image rejection across the band.The device is a two stage LNA
followed by a pair of sub-harmonic mixers, configured to form an image
reject mixer which requires an LO at 15.5-21.5 GHz.The image reject
mixer eliminates the need for a bandpass filter after the LNA to remove
thermal noise at the image frequency.The use of a sub-harmonic mixer
makes the provision of the LO easier than for fundamental mixers at
these frequencies. I and Q mixer outputs are provided and an external
90 degree hybrid is required to select the desired sideband.This MMIC
uses Mimix Broadbands 0.15 µm GaAs PHEMT device model
technology, and is based upon electron beam lithography to ensure
high repeatability and uniformity.The chip has surface passivation to
protect and provide a rugged part with backside via holes and gold
www.DataSheet4U.com
metallization to allow either a conductive epoxy or eutectic solder die
attach process.This device is well suited for Millimeter-wave Point-to-
Point Radio, LMDS, SATCOM and VSAT applications.
Absolute Maximum Ratings
Supply Voltage (Vd)
+6.0 VDC
Supply Current (Id)
70 mA
Gate Bias Voltage (Vg)
+0.3 VDC
Input Power (RF Pin)
Storage Temperature (Tstg)
Operating Temperature (Ta)
Channel Temperature (Tch)
0 dBm
-65 to +165 OC
-55 to MTTF Table3
MTTF Table3
(3) Channel temperature affects a device's MTTF. It is
recommended to keep channel temperature as low as
possible for maximum life.
Electrical Characteristics (Ambient Temperature T = 25o C)
Parameter
Units Min. Typ. Max.
Frequency Range (RF) Upper Side Band
GHz 34.0 - 40.0
Frequency Range (RF) Lower Side Band
GHz 33.0 - 40.0
Frequency Range (LO)
GHz 15.5 - 21.5
Frequency Range (IF)
GHz DC - 3.0
Input Return Loss RF (S11)
Small Signal Conversion Gain RF/IF (S21) (USB/LSB) 2
dB - 18.0
dB 3.0/3.0 9.0/9.0
-
-
LO Input Drive (PLO)
Image Rejection (USB/LSB) 2
dBm +10.0 +12.0 +14.0
dBc 10.0/6.0 14.0/12.0
-
Noise Figure (NF)
dB - 4.0 -
Isolation LO/RF @ LOX2
Input Power for 1 dB Compression (P1dB)1
dB - 45.0 -
dBm - -13.0 -
Drain Bias Voltage (Vd)
VDC - +3.0 +5.5
Gate Bias Voltage (Vg)
VDC -1.0 -0.5 0.0
Supply Current (Id) (Vd=3.0V, Vg=-0.5V Typical)
mA -
30 60
(1) Measured using constant current.
(2) Min/Max limits over 33.0-39.5 GHz
Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099
Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com
Page 1 of 8
Characteristic Data and Specifications are subject to change without notice. ©2005 Mimix Broadband, Inc.
Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept
their obligation to be compliant with U.S. Export Laws.

PagesPages 8
Télécharger [ XR1001 ]


Fiche technique recommandé

No Description détaillée Fabricant
XR1000 GaAs MMIC Receiver Mimix Broadband
Mimix Broadband
XR1001 GaAs MMIC Receiver Mimix Broadband
Mimix Broadband
XR1002 GaAs MMIC Receiver Mimix Broadband
Mimix Broadband
XR1002-BD GaAs MMIC Receiver Mimix Broadband
Mimix Broadband

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche