PDF HCPL062N Data sheet ( Hoja de datos )

Número de pieza	HCPL062N
Descripción	Dual Channel High Speed-10 MBit/s Logic Gate Optocouplers
Fabricantes	Fairchild Semiconductor
Logotipo
Hay una vista previa y un enlace de descarga de HCPL062N (archivo pdf) en la parte inferior de esta página. Total 13 Páginas
No Preview Available ! July 2006 HCPL062N 3.3V Dual Channel High Speed-10 MBit/s Logic Gate Optocouplers tm Features ■ Compact SO8 package ■ Very high speed – 10MBit/s ■ Superior CMR – 25kV/µs minimum (1,000 volts common mode) ■ Logic gate output ■ Wired OR-open collector ■ Fixed threshold detector design minimizes thermal impact on switching times ■ U.L. recognized (File # E90700) Applications ■ Ground loop elimination ■ Field buses ■ Line receiver, data transmission ■ Data multiplexing ■ Switching power supplies ■ Pulse transformer replacement ■ Computer-peripheral interface ■ Instrumentation input/output isolation Description The HCPL062N optocouplers consist of an AlGaAs LED, optically coupled to a very high speed integrated photo- detector logic gate consisting of bipolar transistors on a CMOS process for reduced power consumption. The output features an open collector, thereby permitting wired OR outputs. The devices are housed in a compact small-outline package. The coupled parameters are guaranteed over the temperature range of -40°C to +85°C. An internal noise shield and provides superior common mode rejection. Package Dimensions 0.164 (4.16) 0.144 (3.66) Pin 1 0.202 (5.13) 0.182 (4.63) 0.143 (3.63) 0.123 (3.13) 0.019 (0.48) 0.010 (0.25) 0.006 (0.16) 0.008 (0.20) 0.021 (0.53) 0.003 (0.08) 0.011 (0.28) 0.050 (1.27) Note: TYP All dimensions are in inches (millimeters) 0.244 (6.19) 0.224 (5.69) Lead Coplanarity : 0.004 (0.10) MAX ©2006 Fairchild Semiconductor Corporation HCPL062N Rev. 1.0.0 1 www.fairchildsemi.com 1 page Transfer Characteristics (TA = -40°C to +85°C Unless otherwise speciﬁed.) Symbol DC Characteristics Test Conditions Min. VOL Low Level Output Voltage VCC = 3.3V, IF = 5mA, IOL = 13mA IFT Input Threshold Current VCC = 3.3V, VO = 0.6V, IOL = 13mA – – Typ.(3) – – Max. 0.6 5 Unit V mA Isolation Characteristics (TA = -40°C to +85°C Unless otherwise speciﬁed.) Symbol Characteristics Test Conditions Min. II-O Input-Output Insulation Leakage Current VISO Withstand Insulation Test Voltage Relative humidity = 45% TA = 25°C, t = 5 sec. VI-O = 3000 VDC, Note 10 RH < 50%, TA = 25°C II-O ≤ 2µA, t = 1 min., Note 10 – 2500 RI-O Resistance (Input to Output) VI-O = 500V, Note 10 CI-O Capacitance (Input to Output) f = 1MHz, Note 10 – – Typ.(3) – – 1012 0.6 Max. 1.0 – – – Unit µA VRMS Ω pF Notes: 3. All typical values are at VCC = 3.3V, TA = 25°C unless otherwise specified. 4. tPLH – Propagation delay is measured from the 3.75 mA level on the HIGH to LOW transition of the input current pulse to the 1.5V level on the LOW to HIGH transition of the output voltage pulse. 5. tPHL – Propagation delay is measured from the 3.75 mA level on the LOW to HIGH transition of the input current pulse to the 1.5V level on the HIGH to LOW transition of the output voltage pulse. 6. tr – Rise time is measured from the 90% to the 10% levels on the LOW to HIGH transition of the output pulse. 7. tf – Fall time is measured from the 10% to the 90% levels on the HIGH to LOW transition of the output pulse. 8. CMH – The maximum tolerable rate of rise of the common mode voltage to ensure the output will remain in the high state (i.e., VOUT > 2.0 V). Measured in volts per microsecond (V/µs). 9. CML – The maximum tolerable rate of fall of the common mode voltage to ensure the output will remain in the low output state (i.e., VOUT < 0.8 V). Measured in volts per microsecond (V/µs). 10. Device considered a two-terminal device: Pins 1,2,3 and 4 shorted together, and Pins 5,6,7 and 8 shorted together. 11. The power supply bypass capacitors must be no further than 3mm from the leads of the optocoupler. A low inductance ground plane width of with ≤ 5nHy of series lead inductance is required. HCPL062N Rev. 1.0.0 5 www.fairchildsemi.com 5 Page Ordering Information Option No Sufﬁx R1 R2 Order Entry Identiﬁer HCPL062N HCPL062NR1 HCPL062NR2 Description Shipped in tubes (50 units per tube) Tape and Reel (500 units per reel) Tape and Reel (2500 units per reel) Marking Information 1 62N X YY S 2 5 34 Deﬁnitions 1 Fairchild logo 2 Device number 3 One digit year code, e.g., ‘3’ 4 Two digit work week ranging from ‘01’ to ‘53’ 5 Assembly package code HCPL062N Rev. 1.0.0 11 www.fairchildsemi.com 11 Page

Páginas	Total 13 Páginas
PDF Descargar	[ Datasheet HCPL062N.PDF ]

Hoja de datos destacado

Número de pieza	Descripción	Fabricantes
HCPL062N	Dual Channel High Speed-10 MBit/s Logic Gate Optocouplers	Fairchild Semiconductor

Número de pieza	Descripción	Fabricantes
SLA6805M	High Voltage 3 phase Motor Driver IC.	Sanken
SDC1742	12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.	Analog Devices

DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.

DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar