DataSheet.es    


PDF HMC545 Data sheet ( Hoja de datos )

Número de pieza HMC545
Descripción GaAs MMIC SPDT SWITCH
Fabricantes Hittite Microwave 
Logotipo Hittite Microwave Logotipo



Hay una vista previa y un enlace de descarga de HMC545 (archivo pdf) en la parte inferior de esta página.


Total 6 Páginas

No Preview Available ! HMC545 Hoja de datos, Descripción, Manual

v00.0905
HMC545 / 545E
GaAs MMIC SPDT
SWITCH, DC - 3 GHz
Typical Applications
The HMC545 / HMC545E is ideal for:
• Cellular/3G Infrastructure
• Private Mobile Radio Handsets
• WLAN, WiMAX & WiBro
8 • Automotive Telematics
• Test Equipment
Functional Diagram
Features
Low Insertion Loss: 0.25 dB
High Input IP3: +65 dBm
Low DC Power Consumption
Positive Control: 0/+3V to 0/+8V
Ultra Small Package: SOT26
General Description
The HMC545 and HMC545E are low-cost SPDT
switches in 6-lead SOT26 plastic packages for use
in general switching applications which require
very low insertion loss and very small size. With
0.25 dB typical loss, these devices can control sig-
nals from DC to 3.0 GHz and are especially suited
for IF and RF applications including Cellular/3G,
ISM, automotive and portables. The design provides
www.DataSheet4U.ceomxceptional insertion loss performance, ideal for filter
and receiver switching. RF1 and RF2 are reflective
shorts when “Off”. The two control voltages require a
minimal amount of DC current and offer compatibility
with CMOS and some TTL logic families.
8 - 276
Electrical Specifications
TA = +25° C, Vctl = 0/+5 Vdc (Unless Otherwise Stated), 50 Ohm System
Parameter
Frequency
Min.
Insertion Loss
DC - 1.0 GHz
DC - 2.5 GHz
DC - 3.0 GHz
Isolation
DC - 2.2 GHz
DC - 2.5 GHz
DC - 3.0 GHz
26
22
20
Return Loss
DC - 1.0 GHz
DC - 2.0 GHz
DC - 2.5 GHz
DC - 3.0 GHz
Input Power for 1 dB Compression
Vctl = 0/+3V
Vctl = 0/+5V
Vctl = 0/+8V
0.5 - 3.0 GHz
23
29
32
Input Third Order Intercept
(Two-tone Input Power = +17 dBm Each Tone)
Vctl = 0/+3V
Vctl = 0/+5V
Vctl = 0/+8V
0.5 - 3.0 GHz
Switching Characteristics
DC - 3.0 GHz
tRISE, tFALL (10/90% RF)
tON, tOFF (50% CTL to 10/90% RF)
Typ.
0.25
0.3
0.4
31
27
24
25
21
19
17
27
33
36
45
65
65
70
90
Max.
0.4
0.5
0.7
Units
dB
dB
dB
dB
dB
dB
dB
dB
dB
dB
dBm
dBm
dBm
dBm
dBm
dBm
ns
ns
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com

1 page




HMC545 pdf
v00.0905
Typical Application Circuit
8
HMC545 / 545E
GaAs MMIC SPDT
SWITCH, DC - 3 GHz
Notes:
1. Set logic gate Vdd = +3V to +5V and use HCT series logic to provide a TTL driver interface.
2. Control inputs A/B can be driven directly with CMOS logic (HC) with Vdd of +3V to +8V applied to the CMOS logic gates.
3. DC Blocking capacitors are required for each RF port as shown. Capacitor value determines lowest frequency of operation.
4. Highest RF signal power capability is achieved with Vdd = +8V and A/B set to 0/+8V.
Pin Descriptions
Pin Number
Function
1, 3, 5
RF2, RF1, RFC
Description
These pins are DC coupled and matched to 50 Ohms.
Blocking capacitors are required.
2
GND
This pin must be connected to RF/DC ground.
4 B See truth and control voltage tables.
6 A See truth and control voltage tables.
Interface Schematic
8 - 280
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com

5 Page










PáginasTotal 6 Páginas
PDF Descargar[ Datasheet HMC545.PDF ]




Hoja de datos destacado

Número de piezaDescripciónFabricantes
HMC540LP31 dB LSB GaAs MMIC 4-BIT DIG POSITIVE CONTROL ATTENUATORHittite Microwave
Hittite Microwave
HMC540LP3E1 dB LSB GaAs MMIC 4-BIT DIG POSITIVE CONTROL ATTENUATORHittite Microwave
Hittite Microwave
HMC540SLP3E1 dB LSB SILICON MMIC 4-BIT DIGITAL POSITIVE CONTROL ATTENUATORAnalog Devices
Analog Devices
HMC541LP310 dB GaAs MMIC 1-BIT DIGITAL POSITIVE CONTROL ATTENUATORHittite Microwave
Hittite Microwave

Número de piezaDescripciónFabricantes
SLA6805M

High Voltage 3 phase Motor Driver IC.

Sanken
Sanken
SDC1742

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

Analog Devices
Analog Devices


DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.


DataSheet.es    |   2020   |  Privacy Policy  |  Contacto  |  Buscar