DataSheet.es    


PDF 74ACT374 Data sheet ( Hoja de datos )

Número de pieza 74ACT374
Descripción Octal D-Type Flip-Flops with 3-State Output
Fabricantes Hitachi Semiconductor 
Logotipo Hitachi Semiconductor Logotipo



Hay una vista previa y un enlace de descarga de 74ACT374 (archivo pdf) en la parte inferior de esta página.


Total 11 Páginas

No Preview Available ! 74ACT374 Hoja de datos, Descripción, Manual

HD74AC374/HD74ACT374
Octal D-Type Flip-Flops with 3-State Output
Description
The HD74AC374/HD74ACT374 is a high-speed, low-power octal D-type flip-flop featuring separate D-
type inputs for each flip-flop and 3-state outputs for bus-oriented applications. A buffered Clock (CP) and
Output Enable (OE) are common to all flip-flops.
Features
Buffered Positive Edge-Triggered Clock
3-State Outputs for Bus-Oriented Applications
Outputs Source/Sink 24 mA
See HD74AC273/HD74ACT273 for Reset Version
See HD74AC373/HD74ACT373 for Transpwawrwe.DnattaSLheaett4cUh.comVersion
See HD74AC574/HD74ACT574 for Broadside Pinout Version
See HD74AC564/HD74ACT564 for Broadside
Pinout Version with Inverted Outputs
HD74ACT374 has TTL-Compatible Inputs

1 page




74ACT374 pdf
HD74AC374/HD74ACT374
AC Operating Requirements: HD74AC374
Item
Symbol
VCC (V)*1
Ta = +25°C
CL = 50 pF
Typ
Setup time, HIGH or LOW
t su
3.3 2.0
Dn to CP
5.0 1.0
Hold time, HIGH or LOW
th
3.3 –1.0
Dn to CP
5.0 –4.0
CP pulse width, HIGH or LOW tw
3.3 4.0
5.0 2.5
Note: 1. Voltage Range 3.3 is 3.3 V ± 0.3 V
Voltage Range 5.0 is 5.0 V ± 0.5 V
Ta = –40°C
to +85°C
CL = 50 pF
Guaranteed Minimum
5.5 6.0
4.0 4.5
1.0 1.0
1.5 1.5
5.5 6.0
4.0 4.5
Unit
ns
ns
ns
AC Characteristics: HD74ACT374
Item
Maximum clock
frequency
Symbol VCC (V)*1
fmax 5.0
Ta = +25°C
CL = 50 pF
Min Typ
100 160
Propagation delay
CP to On
t PLH
5.0
Propagation delay
CP to On
t PHL
5.0
Output enable time
t PZH
5.0
Output enable time
t PZL
5.0
Output disable time
t PHZ
5.0
Output disable time
t PLZ
5.0
Note: 1. Voltage Range 5.0 is 5.0 V ± 0.5 V
1.0
1.0
1.0
1.0
1.0
1.0
8.5
8.0
8.0
8.0
8.5
7.0
Max
10.0
9.5
9.5
9.0
11.5
8.5
Ta = –40°C to +85°C
CL = 50 pF
Min Max
90 —
Unit
MHz
1.0 11.5 ns
1.0 11.0 ns
1.0 10.5 ns
1.0 10.5 ns
1.0 12.5 ns
1.0 10.0 ns
5

5 Page





74ACT374 arduino
Cautions
1. Hitachi neither warrants nor grants licenses of any rights of Hitachi’s or any third party’s patent,
copyright, trademark, or other intellectual property rights for information contained in this document.
Hitachi bears no responsibility for problems that may arise with third party’s rights, including
intellectual property rights, in connection with use of the information contained in this document.
2. Products and product specifications may be subject to change without notice. Confirm that you have
received the latest product standards or specifications before final design, purchase or use.
3. Hitachi makes every attempt to ensure that its products are of high quality and reliability. However,
contact Hitachi’s sales office before using the product in an application that demands especially high
quality and reliability or where its failure or malfunction may directly threaten human life or cause risk
of bodily injury, such as aerospace, aeronautics, nuclear power, combustion control, transportation,
traffic, safety equipment or medical equipment for life support.
4. Design your application so that the product is used within the ranges guaranteed by Hitachi particularly
for maximum rating, operating supply voltage range, heat radiation characteristics, installation
conditions and other characteristics. Hitachi bears no responsibility for failure or damage when used
beyond the guaranteed ranges. Even within the guaranteed ranges, consider normally foreseeable
failure rates or failure modes in semiconductor devices and employ systemic measures such as fail-
safes, so that the equipment incorporating Hitachi product does not cause bodily injury, fire or other
consequential damage due to operation of the Hitachi product.
5. This product is not designed to be radiation resistant.
6. No one is permitted to reproduce or duplicate, in any form, the whole or part of this document without
written approval from Hitachi.
7. Contact Hitachi’s sales office for any questions regarding this document or Hitachi semiconductor
products.
Hitachi, Ltd.
Semiconductor & Integrated Circuits.
Nippon Bldg., 2-6-2, Ohte-machi, Chiyoda-ku, Tokyo 100-0004, Japan
Tel: Tokyo (03) 3270-2111 Fax: (03) 3270-5109
URL
NorthAmerica
Europe
Asia (Singapore)
Asia (Taiwan)
Asia (HongKong)
Japan
: http:semiconductor.hitachi.com/
: http://www.hitachi-eu.com/hel/ecg
: http://www.has.hitachi.com.sg/grp3/sicd/index.htm
: http://www.hitachi.com.tw/E/Product/SICD_Frame.htm
: http://www.hitachi.com.hk/eng/bo/grp3/index.htm
: http://www.hitachi.co.jp/Sicd/indx.htm
For further information write to:
Hitachi Semiconductor
(America) Inc.
179 East Tasman Drive,
San Jose,CA 95134
Tel: <1> (408) 433-1990
Fax: <1>(408) 433-0223
Hitachi Europe GmbH
Electronic components Group
Dornacher Stra§e 3
D-85622 Feldkirchen, Munich
Germany
Tel: <49> (89) 9 9180-0
Fax: <49> (89) 9 29 30 00
Hitachi Europe Ltd.
Electronic Components Group.
Whitebrook Park
Lower Cookham Road
Maidenhead
Berkshire SL6 8YA, United Kingdom
Tel: <44> (1628) 585000
Fax: <44> (1628) 778322
Hitachi Asia Pte. Ltd.
Hitachi Asia (Hong Kong) Ltd.
16 Collyer Quay #20-00
Group III (Electronic Components)
Hitachi Tower
7/F., North Tower, World Finance Centre,
Singapore 049318
Harbour City, Canton Road, Tsim Sha Tsui,
Tel: 535-2100
Kowloon, Hong Kong
Fax: 535-1533
Tel: <852> (2) 735 9218
Fax: <852> (2) 730 0281
Hitachi Asia Ltd.
Telex: 40815 HITEC HX
Taipei Branch Office
3F, Hung Kuo Building. No.167,
Tun-Hwa North Road, Taipei (105)
Tel: <886> (2) 2718-3666
Fax: <886> (2) 2718-8180
Copyright ' Hitachi, Ltd., 1999. All rights reserved. Printed in Japan.

11 Page







PáginasTotal 11 Páginas
PDF Descargar[ Datasheet 74ACT374.PDF ]




Hoja de datos destacado

Número de piezaDescripciónFabricantes
74ACT373OCTAL D-TYPE LATCH WITH 3 STATE OUTPUT NON INVERTINGSTMicroelectronics
STMicroelectronics
74ACT373BOCTAL D-TYPE LATCH WITH 3 STATE OUTPUT NON INVERTINGSTMicroelectronics
STMicroelectronics
74ACT373MOCTAL D-TYPE LATCH WITH 3 STATE OUTPUT NON INVERTINGSTMicroelectronics
STMicroelectronics
74ACT373MSAOctal Transparent Latch with 3-STATE OutputsFairchild Semiconductor
Fairchild Semiconductor

Número de piezaDescripciónFabricantes
SLA6805M

High Voltage 3 phase Motor Driver IC.

Sanken
Sanken
SDC1742

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

Analog Devices
Analog Devices


DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.


DataSheet.es    |   2020   |  Privacy Policy  |  Contacto  |  Buscar