|
|
PDF ACS750SCA-050 Data sheet ( Hoja de datos )
| Número de pieza | ACS750SCA-050 | |
| Descripción | Current Sensor | |
| Fabricantes | Allegro MicroSystems | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de ACS750SCA-050 (archivo pdf) en la parte inferior de esta página. Total 12 Páginas | ||
|
No Preview Available !
Current Sensor: ACS750xCA-050
4
5
Pin 1: VCC
Pin 2: Gnd
Pin 3: Output
123
Terminal 4: Ip+
Terminal 5: Ip-
ABSOLUTE MAXIMUM RATINGS
Operating Temperature
S ..................................................... –20 to +85ºC
L ................................................... –40 to +150ºC
Supply Voltage, Vcc........................................... 16 V
Reverse Supply Voltage, VRCC ........................ –16 V
Output Voltage ................................................... 16 V
Reverse Output Voltage, VROUT...................... –0.1 V
Output Current Source ..................................... 3 mA
Output Current Sink........................................10 mA
Maximum Storage Temperature...........–65 to 170°C
Maximum Junction Temperature .................... 165°C
Always order by complete part number:
ACS750SCA-050
ACS750LCA-050
The Allegro ACS75x family of current sensors provides economical and
precise solutions for current sensing in industrial, automotive, commercial, and
communications systems. The device package allows for easy implementation
by the customer. Typical applications include motor control, load detection and
management, power supplies, and overcurrent fault protection.
The device consists of a precision, low-offset linear Hall sensor circuit with a
copper conduction path located near the die. Applied current flowing through
this copper conduction path generates a magnetic field which is sensed by the
integrated Hall IC and converted into a proportional voltage. Device accuracy
is optimized through the close proximity of the magnetic signal to the Hall
transducer. A precise, proportional voltage is provided by the low-offset, chopper-
stabilized BiCMOS Hall IC, which is programmed for accuracy at the factory.
The output of the device has a positive slope (>VCC/ 2) when an increasing
current flows through the primary copper conduction path (from terminal 4 to
terminal 5), which is the path used for current sensing. The internal resistance of
this conductive path is typically 130 µΩ, providing low power loss. The thickness
of the copper conductor allows survival of the device at up to 5× overcurrent
conditions. The terminals of the conductive path are electrically isolated from the
sensor leads (pins 1 through 3). This allows the ACS75x family of sensors to be
used in applications requiring electrical isolation without the use of opto-isolators
or other costly isolation techniques.
The deviwcwew.iDsatafSuhelelty4U.ccoamlibrated prior to shipment from the factory. The ACS75x
family is lead-free. All leads are coated with 100% matte tin, and there is no lead
inside the package. The heavy gauge leadframe is made of oxygen-free copper.
Features and Benefits
• Monolithic Hall IC for high reliability
• Single +5 V supply
• 3 kVRMS isolation voltage between terminals 4/5 and pins 1/2/3
• Lead-free
• Automotive temperature range available
• End-of-line factory-trimmed for gain and offset
• Ultra-low power loss: 130 µΩ internal conductor resistance
• Ratiometric output from supply voltage
• Extremely stable output offset voltage
• Small package size, with easy mounting capability
• Output proportional to ac and dc currents
TÜV America
Certificate Number:
U8V 04 11 54214 002
Applications
• Industrial systems
• Motor control
• Power conversion
• Battery monitors
• Automotive systems
ACS75050-DS Rev. 7
115 Northeast Cutoff, Box 15036
Worcester, Massachusetts 01615-0036 (508) 853-5000
1 page  
Current Sensor: ACS750xCA-050
Typical Performance Characteristics
Magnetic Offset
Vcc = 5 V
1
0.8
0.6
0.4
0.2
0
-0.2
-0.4
-0.6
-0.8
-1
-50
I = 0 A, after excursion to 100 A
-25 0 25 50 75
Temperature (°C)
100 125 150
1
0.8
0.6
0.4
0.2
0
-0.2
-0.4
-0.6
-0.8
-1
-50
-25
0 Ampere Accuracy Error
Vcc = 5 V
Without Offset
0 25 50 75 100 125 150
Temperature (°C)
ACS75050-DS Rev. 7
115 Northeast Cutoff, Box 15036
Worcester, Massachusetts 01615-0036 (508) 853-5000
5
5 Page 
Current Sensor: ACS750xCA-050
Package CA
ACS75050-DS Rev. 7
115 Northeast Cutoff, Box 15036
Worcester, Massachusetts 01615-0036 (508) 853-5000
11
11 Page | ||
| Páginas | Total 12 Páginas | |
| PDF Descargar | [ Datasheet ACS750SCA-050.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| ACS750SCA-050 | Current Sensor | Allegro MicroSystems |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |