DataSheetWiki

CAT1023 Datasheet دیتاشیت PDF دانلود

دیتاشیت - Catalyst Semiconductor - (CAT1021 - CAT1023) Supervisory Circuits

شماره قطعه CAT1023
شرح مفصل (CAT1021 - CAT1023) Supervisory Circuits
تولید کننده Catalyst Semiconductor 
آرم Catalyst Semiconductor 


1 Page

		

No Preview Available !

CAT1023 شرح
CAT1021, CAT1022, CAT1023
Supervisory Circuits with I2C Serial 2k-bit CMOS
EEPROM, Manual Reset and Watchdog Timer
FEATURES
DESCRIPTION
Precision Power Supply Voltage Monitor
— 5V, 3.3V and 3V systems
— Five threshold voltage options
Watchdog Timer
Active High or Low Reset
The CAT1021, CAT1022 and CAT1023 are complete
memory and supervisory solutions for microcontroller-
based systems. A 2k-bit serial EEPROM memory and a
system power supervisor with brown-out protection are
integrated together in low power CMOS technology.
Memory interface is via a 400kHz I2C bus.
— Valid reset guaranteed at VCC = 1V
400kHz I2C Bus
2.7V to 5.5V Operation
Low power CMOS technology
The CAT1021 and CAT1023 provide a precision VCC
sense circuit and two open drain outputs: one (RESET)
drives high and the other (R¯¯E¯S¯E¯T¯) drives low whenever
VCC falls below the reset threshold voltage. The
CAT1022 has only a R¯¯E¯S¯E¯T¯ output and does not have
16-Byte Page Write Buffer
Built-in inadvertent write protection
a Write Protect input. The CAT1021 also has a Write
Protect input (WP). Write operations are disabled if WP
is connected to a logic high.
— WP pin (CAT1021)
1,000,000 Program/Erase cycles
Manual Reset Input
All supervisors have a 1.6 second watchdog timer circuit
that resets a system to a known state if software or a
hardware glitch halts or “hangs” the system. For the
100 year data retention
CAT1021www.DataSheet4U.com and CAT1022, the watchdog timer monitors
the SDA signal. The CAT1023 has a separate watchdog
Industrial and extended temperature ranges
timer interrupt input pin, WDI.
8-pin DIP, SOIC, TSSOP, MSOP or TDFN
(3 x 3 mm foot-print) packages
— TDFN max height is 0.8mm
The power supply monitor and reset circuit protect
memory and system controllers during power up/down
and against brownout conditions. Five reset threshold
voltages support 5V, 3.3V and 3V systems. If power
supply voltages are out of tolerance reset signals
become active, preventing the system microcontroller,
ASIC or peripherals from operating. Reset signals
become inactive typically 200 ms after the supply voltage
exceeds the reset threshold level. With both active high
and low reset signals, interface to microcontrollers and
other ICs is simple. In addition, the R¯¯E¯S¯E¯T¯ pin or a
separate input, ¯M¯R¯, can be used as an input for push-
For Ordering Information details, see page 19.
button manual reset capability.
The on-chip, 2k-bit EEPROM memory features a 16-byte
page. In addition, hardware data protection is provided
by a VCC sense circuit that prevents writes to memory
whenever VCC falls below the reset threshold or until VCC
reaches the reset threshold during power up.
Available packages include an 8-pin DIP and surface
mount 8-pin SO, 8-pin TSSOP, 8-pin TDFN and 8-pin
MSOP packages. The TDFN package thickness is
0.8mm maximum. TDFN footprint options are 3x3mm.
© 2007 Catalyst Semiconductor, Inc.
Characteristics subject to change without notice
1
Doc. No. 3009 Rev. L

قانون اساسیصفحه 21
دانلود [ CAT1023 دیتاشیت ]



دیتاشیت توصیه

شماره قطعه شرح مفصل تولید کنندگان
CAT102 Precision/ Adjustable Shunt Regulator (600mV Reference) Catalyst Semiconductor
Catalyst Semiconductor
CAT1021 (CAT1021 - CAT1023) Supervisory Circuits Catalyst Semiconductor
Catalyst Semiconductor
CAT1021 (CAT1021 - CAT1023) Supervisory Circuits ON Semiconductor
ON Semiconductor
CAT1022 (CAT1021 - CAT1023) Supervisory Circuits Catalyst Semiconductor
Catalyst Semiconductor

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2018   |   تماس با ما  |   جستجو