|
|
PDF MBR150 Data sheet ( Hoja de datos )
| Número de pieza | MBR150 | |
| Descripción | (MBR150 / MBR160) Axial Lead Rectifiers | |
| Fabricantes | ON Semiconductor | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de MBR150 (archivo pdf) en la parte inferior de esta página. Total 5 Páginas | ||
|
No Preview Available !
www.DataSheet4U.com
MBR150, MBR160
MBR160 is a Preferred Device
Axial Lead Rectifiers
The MBR150/160 series employs the Schottky Barrier principle in a
large area metal−to−silicon power diode. State−of−the−art geometry
features epitaxial construction with oxide passivation and metal
overlap contact. Ideally suited for use as rectifiers in low−voltage,
high−frequency inverters, free wheeling diodes, and polarity
protection diodes.
Features
• Low Reverse Current
• Low Stored Charge, Majority Carrier Conduction
• Low Power Loss/High Efficiency
• Highly Stable Oxide Passivated Junction
• These are Pb−Free Devices*
Mechanical Characteristics:
• Case: Epoxy, Molded
• Weight: 0.4 Gram (Approximately)
• Finish: All External Surfaces Corrosion Resistant and Terminal
Leads are Readily Solderable
• Lead Temperature for Soldering Purposes:
260°C Max. for 10 Seconds
• Polarity: Cathode Indicated by Polarity Band
MAXIMUM RATINGS
Rating
Symbol Value Unit
Peak Repetitive Reverse Voltage
Working Peak Reverse Voltage
DC Blocking Voltage
RMS Reverse Voltage
MBR150
MBR160
MBR150
MBR160
VRRM
VRWM
VR
VR(RMS)
50
60
35
42
V
V
Average Rectified Forward Current (Note 1)
(VR(equiv) v 0.2 VR(dc), TL = 90°C,
RqJA = 80°C/W, P.C. Board Mounting, TA = 55°C)
Nonrepetitive Peak Surge Current
(Surge applied at rated load conditions,
halfwave, single phase, 60 Hz, TL = 70°C)
Operating and Storage Junction Temperature
Range (Reverse Voltage Applied)
IO
IFSM
TJ, Tstg
1.0
25
(for one
cycle)
− 65 to
+150
A
A
°C
THERMAL CHARACTERISTICS (Notes 1 and 2)
Characteristic
Symbol Max Unit
Thermal Resistance, Junction−to−Ambient
RqJA
80 °C/W
Stresses exceeding Maximum Ratings may damage the device. Maximum
Ratings are stress ratings only. Functional operation above the Recommended
Operating Conditions is not implied. Extended exposure to stresses above the
Recommended Operating Conditions may affect device reliability.
1. Lead Temperature reference is cathode lead 1/32″ from case.
2. Pulse Test: Pulse Width = 300 ms, Duty Cycle ≤ 2.0%.
*For additional information on our Pb−Free strategy and soldering details, please
download the ON Semiconductor Soldering and Mounting Techniques
Reference Manual, SOLDERRM/D.
© Semiconductor Components Industries, LLC, 2006
June, 2006 − Rev. 8
1
http://onsemi.com
SCHOTTKY BARRIER
RECTIFIERS
1.0 AMPERE − 50 AND 60 VOLTS
DO−41
AXIAL LEAD
CASE 59
STYLE 1
MARKING DIAGRAM
A
MBR1x0
YYWW G
G
A = Assembly Location
MBR1x0 = Device Code
x = 5 or 6
Y = Year
WW = Work Week
G = Pb−Free Package
(Note: Microdot may be in either location)
ORDERING INFORMATION
See detailed ordering and shipping information in the package
dimensions section on page 4 of this data sheet.
Preferred devices are recommended choices for future use
and best overall value.
Publication Order Number:
MBR150/D
1 page  
MBR150, MBR160
PACKAGE DIMENSIONS
AXIAL LEAD
CASE 59−10
ISSUE U
B
K
F
POLARITY INDICATOR
OPTIONAL AS NEEDED
(SEE STYLES)
D
A
F
K
NOTES:
1. DIMENSIONING AND TOLERANCING PER ANSI
Y14.5M, 1982.
2. CONTROLLING DIMENSION: INCH.
3. ALL RULES AND NOTES ASSOCIATED WITH
JEDEC DO−41 OUTLINE SHALL APPLY
4. POLARITY DENOTED BY CATHODE BAND.
5. LEAD DIAMETER NOT CONTROLLED WITHIN F
DIMENSION.
INCHES
DIM MIN MAX
A 0.161 0.205
B 0.079 0.106
D 0.028 0.034
F −−− 0.050
K 1.000 −−−
MILLIMETERS
MIN MAX
4.10 5.20
2.00 2.70
0.71 0.86
−−− 1.27
25.40 −−−
STYLE 1:
PIN 1. CATHODE (POLARITY BAND)
2. ANODE
ON Semiconductor and
are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice
to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.
“Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All
operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights
nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications
intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should
Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates,
and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death
associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal
Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
LITERATURE FULFILLMENT:
Literature Distribution Center for ON Semiconductor
P.O. Box 5163, Denver, Colorado 80217 USA
Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada
Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada
Email: [email protected]
N. American Technical Support: 800−282−9855 Toll Free
USA/Canada
Europe, Middle East and Africa Technical Support:
Phone: 421 33 790 2910
Japan Customer Focus Center
Phone: 81−3−5773−3850
ON Semiconductor Website: www.onsemi.com
Order Literature: http://www.onsemi.com/orderlit
For additional information, please contact your local
Sales Representative
http://onsemi.com
5
MBR150/D
5 Page | ||
| Páginas | Total 5 Páginas | |
| PDF Descargar | [ Datasheet MBR150.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| MBR150 | Schottky Rectifier ( Diode ) |  Vishay |
| MBR150 | 1 AMP SCHOTTKY RECTIFIER |  Digitron Semiconductors |
| MBR150 | Schottky Rectifier ( Diode ) |  International Rectifier |
| MBR150 | SCHOTTKY BARRIER RECTIFIER DIODES |  EIC |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |