DataSheetWiki


VND5050K-E fiches techniques PDF

ST Microelectronics - Double channel high side driver

Numéro de référence VND5050K-E
Description Double channel high side driver
Fabricant ST Microelectronics 
Logo ST Microelectronics 





1 Page

No Preview Available !





VND5050K-E fiche technique
www.DataSheet4U.com
VND5050J-E
VND5050K-E
Double channel high side driver with analog current sense
for automotive applications
Features
General
Max supply voltage
Operating voltage range
Max On-State resistance (per ch.)
Current limitation (typ)
Off state supply current
VCC
VCC
RON
ILIMH
IS
41V
4.5 to 36V
50 m
19 A
2 µA(*)
(*) Typical value with all loads connected
Application
All types of resistive, inductive and capacitive
loads
Main
Inrush current active management by power
limitation
Very low stand-by current
3.0V CMOS compatible input
Optimized electromagnetic emission
Very low electromagnetic susceptibility
In compliance with the 2002/95/ec european
directive
Diagnostic Functions
Open drain status output
On state open load detection
Off state open load detection
Thermal shutdown indication
Protections
Undervoltage shut-down
Overvoltage clamp
Output stuck to VCC detection
Load current limitation
PowerSSO-12 PowerSSO-24
Self limiting of fast thermal transients
Protection against loss of ground and loss of
VCC
Thermal shut down
Reverse battery protection (see Figure 28)
Electrostatic discharge protection
Description
The VND5050K-E and VND5050J-E is a
monolithic device made using STMicroelectronics
VIPower M0-5 technology. It is intended for driving
resistive or inductive loads with one side
connected to ground. Active VCC pin voltage
clamp protects the device against low energy
spikes (see ISO7637 transient compatibility
table). The device detects open load condition
both in on and off state, when STAT_DIS is left
open or driven low. Output shorted to VCC is
detected in the off state.
When STAT_DIS is driven high, STATUS pin is in
high impedance state.
Output current limitation protects the device in
overload condition. In case of long overload
duration, the device limits the dissipated power to
safe level up to thermal shut-down intervention.
Thermal shut-down with automatic restart allows
the device to recover normal operation as soon as
fault condition disappears..
Order codes
Package
PowerSSO-12
PowerSSO-24
Part number (Tube)
VND5050J-E
VND5050K-E
Part number (Tape & Reel)
VND5050J-E13TR
VND5050K-E13TR
March 2006
Rev 1
1/28
www.st.com
28

PagesPages 28
Télécharger [ VND5050K-E ]


Fiche technique recommandé

No Description détaillée Fabricant
VND5050K-E Double channel high side driver ST Microelectronics
ST Microelectronics

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche