DataSheetWiki


GP521 fiches techniques PDF

Gennum Corporation - General Purpose Controller / Memory Chip

Numéro de référence GP521
Description General Purpose Controller / Memory Chip
Fabricant Gennum Corporation 
Logo Gennum Corporation 





1 Page

No Preview Available !





GP521 fiche technique
www.DataSheet4U.com
General Purpose
Controller / Memory Chip
for Hearing Instruments
FEATURES
general purpose
EEPROM non-volatile memory
8 programmable current sink (PCS) control outputs
can be configured with 6 PCS outputs for hearing
instruments (two switchable, four non-switchable)
status register
data transmission error detection
synchronization of GP521 internal clocks with program
unit clock
STANDARD PACKAGING
• Chip (129 x 112 mils)
Au Bump
DESCRIPTION
The GP521 is a general purpose controller/memory chip in-
tended for use with audio signal path circuits in programmable
hearing instruments.
The GP521 uses a flexible communication standard which
allows room for future growth in programmable functions for
hearing instruments. The communication with the program unit
is over a bi-directional serial data link. Error detection circuitry
is used to avoid undesired changes in programmed settings.
GP521 - DATA SHEET
An information transfer dialogue consists of the address and
data for a register sent to the GP521 and the register contents
returned by the GP521. The function controlled by an output of
the GP521 is defined by the signal path circuit allowing current
controlled parameters. The relationship between the GP521
register addresses and the function on the signal path circuit
is defined by a data file in the programming unit. With this
format, any software developed for the GP521 can be used for
future generations of Gennum’s controller/memory circuits
and audio signal path circuits.
The GP521 uses EEPROM cells as the long term memory
element. These cells will retain the stored data when the power
supply is disconnected. Each EEPROM cell is combined with
a temporary (RAM) memory cell which makes it possible to
evaluate various control settings prior to saving them in the
long term EEPROM memory.
The GP521 controls the audio signal path circuit using eight
Programmable Current Sinks (PCS). Each PCS has 16 pro-
grammable settings. The circuit can be configured for either 6
or 8 PCS outputs. When used with a single pole single throw
switch (SPST) under the 6 PCS configuration , it is possible to
design a hearing instrument with two programmed settings
(i.e. adjusting a low cut filter for either noisy or quiet back-
ground environments). The 8 output configuration may be
used for circuits that require more programmable but non-
switchable settings. An external reference current is used for
the PCS’s so that the PCS outputs can track with the currents
in the audio signal path circuit.
BLOCK DIAGRAM
IO1
10
IO2
9
CONTROL OUTPUTS
CONTROL OUTPUTS
IO3 IO4 IO5 IO6
8 7 15 13
IO7
12
IO8
11
4 BIT
EEPROM
DAC
V
CC 3
GND 5
4 BIT
EEPROM
DAC
4 BIT
EEPROM
DAC
4 BIT
EEPROM
DAC
4 BIT
EEPROM
DAC
4 BIT
EEPROM
DAC
4 BIT
EEPROM
DAC
4 BIT
EEPROM
DAC
REFERENCE
CURRENT
17 I RIR
2
DATA
SERIAL TO PARELLEL
CONVERSION
DATA ERROR CHECKING
CONTROLLER TIMING
EEPROM
VOLTAGE
MULTIPLIER
STATUS &
OPERATION
REGISTER
1
CLOCK
Revision Date: May 1998
4
SW OFF
6
OS1
OSCILLATOR
16
N/C
14
N/C
Document No. 510 - 79 - 06
GENNUM CORPORATION P.O. Box 489, Stn. A, Burlington, Ontario, Canada L7R 3Y3 tel. +1 (905) 632-2996
Web Site: www.gennum.com E-mail: [email protected]

PagesPages 8
Télécharger [ GP521 ]


Fiche technique recommandé

No Description détaillée Fabricant
GP520A Programmable Analog Signal Processor Gennum
Gennum
GP521 General Purpose Controller / Memory Chip Gennum Corporation
Gennum Corporation
GP522 Controller Chip Gennum
Gennum

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche