DataSheetWiki


ADC601 fiches techniques PDF

Burr-Brown - ANALOG-TO-DIGITAL CONVERTER

Numéro de référence ADC601
Description ANALOG-TO-DIGITAL CONVERTER
Fabricant Burr-Brown 
Logo Burr-Brown 





1 Page

No Preview Available !





ADC601 fiche technique
www.DataSheet4U.com
®
ADC601
12-Bit 900ns
ANALOG-TO-DIGITAL CONVERTER
FEATURES
q FAST CONVERSION: 900ns
q CAN BE SHORT-CYCLED
q INPUT RANGES: ±5V, ±10V, 0 to –10V
q HIGH SIGNAL/NOISE RATIO: 68dB
q LOW IMD: 75dB
q PARALLEL AND SERIAL OUTPUT
q 32-PIN CERAMIC DIP PACKAGE
DESCRIPTION
The ADC601 is a high-speed Duolithic™ (two chips)
successive approximation analog-to-digital converter.
This unique two-chip design utilizes a bipolar technol-
ogy with on-chip thin film resistors to preserve analog
accuracy and a high-speed CMOS chip to perform
digital logic control. Outstanding linearity, noise, and
dynamic range are achieved by this converter design.
The ADC601 has been tested with several sample/hold
amplifiers and distortion results are documented in this
data sheet.
The ADC601 is complete with internal reference, clock,
and comparator and is packaged in a 32-pin ceramic
DIP. Conversion time is set at the factory to 900ns.
Serial and parallel output performance is guaranteed
APPLICATIONS
q DIGITAL SIGNAL PROCESSING
q HIGH-SPEED DATA ACQUISITION
SYSTEMS
q MEDICAL INSTRUMENTATION
q ANALYTICAL INSTRUMENTATION
q TEST AND IMAGING SYSTEMS
q WAVEFORM ANALYZERS
with no missing codes over the full input voltage,
power supply, and operating temperature range. The
gain and offset errors are laser trimmed to specifica-
tion. Optionally they may be externally adjusted to
zero.
Internal scaling resistors are provided for the selection
of analog signal input ranges of ±5V, ±10V and 0V to
–10V. The ADC601’s input is specifically designed to
be easily driven with minimal disturbance to the driv-
ing amplifier.
Output codes are available in complementary binary
for unipolar inputs and bipolar offset binary for bipolar
inputs.
All digital inputs and outputs are TTL-compatible.
Power supply requirements are ±15V and +5V.
Bipolar Offset
Input
Range Select
Comparator In
12-Bit
Successive Approx
Register (SAR)
+
Comparator
Clock
Convert
Command
Parallel
Digital
Output
Clock Rate Control
Clock Out
Status
Serial Out
Duolithic™ Burr-Brown Corporation
International Airport Industrial Park • Mailing Address: PO Box 11400 • Tucson, AZ 85734 • Street Address: 6730 S. Tucson Blvd. • Tucson, AZ 85706
Tel: (520) 746-1111 • Twx: 910-952-1111 • Cable: BBRCORP • Telex: 066-6491 • FAX: (520) 889-1510 • Immediate Product Info: (800) 548-6132
©1989 Burr-Brown Corporation
PDS-867C
Printed in U.S.A. March, 1992

PagesPages 4
Télécharger [ ADC601 ]


Fiche technique recommandé

No Description détaillée Fabricant
ADC601 ANALOG-TO-DIGITAL CONVERTER Burr-Brown
Burr-Brown
ADC603 ANALOG-TO-DIGITAL CONVERTER Burr-Brown
Burr-Brown

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche