|
|
PDF KF3004-GF11A Data sheet ( Hoja de datos )
| Número de pieza | KF3004-GF11A | |
| Descripción | Compact low voltage thick film thermal printhead | |
| Fabricantes | ROHM Semiconductor | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de KF3004-GF11A (archivo pdf) en la parte inferior de esta página. Total 5 Páginas | ||
|
No Preview Available !
www.DataSheet4U.com
Printheads
KF3004-GF11A
Compact low voltage thick film
thermal printhead (12dots / mm)
KF3004-GF11A
KF3004-GF11A of low voltage thermal printheads have a 1.25-mm pitch connectors and reduced power supply circuit
voltage requirements. This makes them useful for a wide range of applications, including CAT, FET-POS and naturally,
handheld devices that demand printer heads which can operate with low supplied voltage.
zApplications
Mobile printers
FET-POS printers
Hand-held printers
Debit printers
zFeatures
1) Both the circuit voltage and the voltage required during printing are 3.3V ; this allows the design of complete printer
assemblies with energy-saving low power consumption.
2) KF3004-GF11A has a resistance value of 210Ω and can take a maximum current of 8.5V for printing. This is useful in
applications where the peak voltage is restricted.
3) Because the connectors accept 1.25-mm pitch FFC (Flexible flat cables) it is possible to reduce the size of printer
mechanism control boards.
zExternal dimensions (Unit : mm)
117±0.3
108.416 (Effective Print Width)
Dot #1280
Dot #1
No.28
0.342±0.01
(mask measurement)
CONNECTOR
No.1
0.342±0.01
(mask measurement)
Max.1.7
(1.1)
Pad
Insert of cable direction
4 +0,−0.3
(connector measurement)
1/4
1 page  
Appendix
Notes
No technical content pages of this document may be reproduced in any form or transmitted by any
means without prior permission of ROHM CO.,LTD.
The contents described herein are subject to change without notice. The specifications for the
product described in this document are for reference only. Upon actual use, therefore, please request
that specifications to be separately delivered.
Application circuit diagrams and circuit constants contained herein are shown as examples of standard
use and operation. Please pay careful attention to the peripheral conditions when designing circuits
and deciding upon circuit constants in the set.
Any data, including, but not limited to application circuit diagrams information, described herein
are intended only as illustrations of such devices and not as the specifications for such devices. ROHM
CO.,LTD. disclaims any warranty that any use of such devices shall be free from infringement of any
third party's intellectual property rights or other proprietary rights, and further, assumes no liability of
whatsoever nature in the event of any such infringement, or arising from or connected with or related
to the use of such devices.
Upon the sale of any such devices, other than for buyer's right to use such devices itself, resell or
otherwise dispose of the same, no express or implied right or license to practice or commercially
exploit any intellectual property rights or other proprietary rights owned or controlled by
ROHM CO., LTD. is granted to any such buyer.
Products listed in this document are no antiradiation design.
The products listed in this document are designed to be used with ordinary electronic equipment or devices
(such as audio visual equipment, office-automation equipment, communications devices, electrical
appliances and electronic toys).
Should you intend to use these products with equipment or devices which require an extremely high level of
reliability and the malfunction of with would directly endanger human life (such as medical instruments,
transportation equipment, aerospace machinery, nuclear-reactor controllers, fuel controllers and other
safety devices), please be sure to consult with our sales representative in advance.
About Export Control Order in Japan
Products described herein are the objects of controlled goods in Annex 1 (Item 16) of Export Trade Control
Order in Japan.
In case of export from Japan, please confirm if it applies to "objective" criteria or an "informed" (by MITI clause)
on the basis of "catch all controls for Non-Proliferation of Weapons of Mass Destruction.
Appendix1-Rev1.1
5 Page | ||
| Páginas | Total 5 Páginas | |
| PDF Descargar | [ Datasheet KF3004-GF11A.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| KF3004-GF11A | Compact low voltage thick film thermal printhead | ROHM Semiconductor |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |