DataSheetWiki


HFBR-0600 fiches techniques PDF

Hewlett-Packard - SERCOS Fiber Optic Transmitters and Receiver

Numéro de référence HFBR-0600
Description SERCOS Fiber Optic Transmitters and Receiver
Fabricant Hewlett-Packard 
Logo Hewlett-Packard 





1 Page

No Preview Available !





HFBR-0600 fiche technique
www.DataSheet4U.com
SERCOS Fiber Optic
Transmitters and Receiver
Technical Data
HFBR-0600 Series
Features
• Fully Compliant to SERCOS
Optical Specifications
• Optimized for 1 mm Plastic
Optical Fiber
• Compatible with SMA
Connectors
• Auto-Insertable and Wave
Solderable
• Data Transmission at
Symbol Rates from DC to
over 2 MBd for Distances
from 0 to over 20 Metres
Applications
• Industrial Control Data
Links
• Reduction of Lightning and
Voltage Transient Suscepti-
bility
• Tempest-Secure Data
Processing Equipment
• Isolation in Test and
Measurement Instruments
• Robotics Communication
SERCOS
SERCOS is a SErial Realtime
COmmunication System, a
standard digital interface for
communication between controls
and drives for numerically
controlled machines. The SERCOS
interface specification was written
by a joint working group of the
VDW (German Machine Tool
Builders Association) and ZVEI
(German Electrical and Electronic
Manufacturer’s Association) to
allow data exchange between NC
controls and drives via fiber optic
rings, with isolation and noise
immunity. The HFBR-0600 family
of fiber optic transmitters and
receivers comply to the SERCOS
specifications for transmitter and
receiver optical characteristics
and connector style (SMA).
Description
The HFBR-0600 components are
capable of operation at symbol
rates from DC to over 2 MBd and
distances from 0 to over 20
metres. The HFBR-1602 and
HFBR-1604 transmitters contain
a 655-nm AlGaAs emitter capable
of efficiently launching optical
power into 1000 µm plastic
optical fiber. The optical output is
specified at the end of 0.5 m of
plastic optical fiber.
The HFBR-1604 is a selected
version of the HFBR-1602, with
power specified to meet the
SERCOS high attenuation
specifications.
The HFBR-2602 receiver incor-
porates an integrated photo IC
containing a photodetector and dc
amplifier driving an open-
collector Schottky output
transistor. The HFBR-2602 is
designed for direct interfacing to
popular logic families. The
absence of an internal pull-up
resistor allows the open-collector
output to be used with logic
families such as CMOS requiring
voltage excursions higher than
VCC. The HFBR-2602 has a
dynamic range of 15 dB.
CAUTION: The small junction sizes inherent to the design of this component increase the component's
susceptibility to damage from electrostatic discharge (ESD). It is advised that normal static precautions be
taken in handling and assembly of this component to prevent damage and/or degradation which may be
induced by ESD.

PagesPages 6
Télécharger [ HFBR-0600 ]


Fiche technique recommandé

No Description détaillée Fabricant
HFBR-0600 SERCOS Fiber Optic Transmitters and Receiver Hewlett-Packard
Hewlett-Packard

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche