DataSheetWiki


GS88136T fiches techniques PDF

GSI - (GS88118 / GS88136T) Sync Burst SRAMs

Numéro de référence GS88136T
Description (GS88118 / GS88136T) Sync Burst SRAMs
Fabricant GSI 
Logo GSI 





1 Page

No Preview Available !





GS88136T fiche technique
www.DataSheet4U.com
100-Pin TQFP
Commercial Temp
Industrial Temp
Preliminary
GS88118/36T-11/11.5/100/80/66
512K x 18, 256K x 36 ByteSafe™ 100 MHz–66 MHz
8Mb Sync Burst SRAMs
3.3 V VDD
3.3 V and 2.5 V I/O
1.11 9/2000Features
• FT pin for user-configurable flow through or pipelined
operation
• Single Cycle Deselect (SCD) Operation
• IEEE 1149.1 JTAG-compatible Boundary Scan
• On-chip write parity checking; even or odd selectable
• 3.3 V +10%/–5% core power supply
• 2.5 V or 3.3 V I/O supply
• LBO pin for Linear or Interleaved Burst mode
• Internal input resistors on mode pins allow floating mode pins
• Default to Interleaved Pipeline mode
• Byte Write (BW) and/or Global Write (GW) operation
• Common data inputs and data outputs
• Clock Control, registered, address, data, and control
• Internal self-timed write cycle
• Automatic power-down for portable applications
• 100-lead TQFP package
Pipeline
3-1-1-1
Flow
Through
2-1-1-1
tCycle
tKQ
IDD
tKQ
tCycle
IDD
-11
10 ns
4.0 ns
225 mA
11 ns
15 ns
180 mA
-11.5
10 ns
4.0 ns
225 mA
11.5 ns
15 ns
180 mA
-100
10 ns
4.0 ns
225 mA
12 ns
15 ns
180 mA
-80
12.5 ns
4.5 ns
200 mA
14 ns
15 ns
175 mA
-66
15 ns
5.0 ns
185 mA
18 ns
20 ns
165 mA
Functional Description
Applications
The GS88118//36T is a 9,437,184-bit high performance
synchronous SRAM with a 2-bit burst address counter.
Although of a type originally developed for Level 2 Cache
applications supporting high performance CPUs, the device
now finds application in synchronous SRAM applications,
ranging from DSP main store to networking chip set support.
Controls
Addresses, data I/Os, chip enables (E1, E2), address burst
control inputs (ADSP, ADSC, ADV) and write control inputs
(Bx, BW, GW) are synchronous and are controlled by a
positive-edge-triggered clock input (CK). Output enable (G)
and power down control (ZZ) are asynchronous inputs. Burst
cycles can be initiated with either ADSP or ADSC inputs. In
Burst mode, subsequent burst addresses are generated
internally and are controlled by ADV. The burst address
counter may be configured to count in either linear or
interleave order with the Linear Burst Order (LBO) input. The
Burst function need not be used. New addresses can be loaded
on every cycle with no degradation of chip performance.
Flow Through/Pipeline Reads
The function of the Data Output register can be controlled by
the user via the FT mode pin (Pin 14). Holding the FT mode
pin low places the RAM in Flow Through mode, causing
output data to bypass the Data Output Register. Holding FT
high places the RAM in Pipeline mode, activating the rising-
edge-triggered Data Output Register.
SCD Pipelined Reads
The GS88118//36T is a SCD (Single Cycle Deselect) pipelined
synchronous SRAM. DCD (Dual Cycle Deselect) versions are
also available. SCD SRAMs pipeline deselect commands one
stage less than read commands. SCD RAMs begin turning off
their outputs immediately after the deselect command has been
captured in the input registers.
Byte Write and Global Write
Byte write operation is performed by using Byte Write enable
(BW) input combined with one or more individual byte write
signals (Bx). In addition, Global Write (GW) is available for
writing all bytes at one time, regardless of the byte write
control inputs.
ByteSafe™ Parity Functions
The GS88118/36T features ByteSafe data security functions.
See detailed discussion following.
Sleep Mode
Low power (Sleep mode) is attained through the assertion
(high) of the ZZ signal, or by stopping the clock (CK).
Memory data is retained during Sleep mode.
Core and Interface Voltages
The GS88118//36T operates on a 3.3 V power supply, and all
inputs/outputs are 3.3 V- and 2.5 V-compatible. Separate
output power (VDDQ) pins are used to decouple output noise
from the internal circuit.
Rev: 1.11 9/2000
1/33 © 2000, Giga Semiconductor, Inc.
Specifications cited are subject to change without notice. For latest documentation see http://www.gsitechnology.com.

PagesPages 30
Télécharger [ GS88136T ]


Fiche technique recommandé

No Description détaillée Fabricant
GS88136A (GS88118A - GS88136A) Synchronous Burst SRAMs GSI
GSI
GS88136B (GS88118B - GS88136B) Sync Burst SRAMs GSI
GSI
GS88136T (GS88118 / GS88136T) Sync Burst SRAMs GSI
GSI

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche