DataSheetWiki


CLE232 fiches techniques PDF

Clairex - (CLE230 - CLE233) High Power Aluminum Gallium Arsenide IREDs

Numéro de référence CLE232
Description (CLE230 - CLE233) High Power Aluminum Gallium Arsenide IREDs
Fabricant Clairex 
Logo Clairex 





1 Page

No Preview Available !





CLE232 fiche technique
www.DataSheet4U.com
CLE230,CLE231,CLE232,CLE233
High Power Aluminum Gallium Arsenide IREDs
® Clairex
Technologies, Inc.
February, 2001
0.158 (4.01)
0.136 (3.45)
0.190 (4.83)
0.176 (4.47)
0.210 (5.33)
0.190 (4.83)
1.00 (25.4) min.
0.100 (2.54) dia.
0.215 (5.46)
0.205 (5.21)
ANODE
CATHODE
0.050 (1.27)
0.030 (0.76)
0.025 (0.64) max.
0.019 (0.48)
0.016 (0.41)
ALL DIMENSIONS ARE IN INCHECSa(sMeIL2LIMETERS)
0.147 (3.73)
0.137 (3.48)
features
absolute maximum ratings (TA = 25°C unless otherwise stated)
narrow emission angle
storage temperature ...................................................................... -55°C to +150°C
TO-46 hermetically sealed package
excellent heat dissipation
high power output
description
operating temperature ................................................................... -55°C to +125°C
lead soldering temperature(1) ......................................................................... 240°C
maximum continuous current(2)..................................................................... 100mA
peak forward current (10µs pulse width, 100pps) .............................................. 10A
maximum power dissipation(3)...................................................................... 170mW
The CLE230 series are AlGaAs
reverse voltage .................................................................................................... 3V
infrared emitting diodes mounted in
TO-46 hermetic packages. The
narrow emission angle provides high
on-axis intensity. The series are
spectrally and mechanically matched
to the CLT130 phototransistor series.
notes:
1. 0.06” (1.5mm) from the header for 5 seconds maximum. Maximum
temperature can be 260°C if wave soldering.
2. Derate linearly 1.0mA/°C from 25°C free air temperature to TA = +125°C.
3. Derate linearly 1.7mW/°C from 25°C free air temperature to TA = +125°C.
For additional information, call
Clairex.
electrical characteristics (TA = 25°C unless otherwise noted)
symbol parameter
min typ max units test conditions
Ee Irradiance(1)
CLE230 1.0 -
CLE231 1.5 -
- mW/cm2 IF = 100ma
-
CLE232 2.6 -
CLE233 3.5 -
-
-
VF Forward voltage
- - 1.8 V IF = 100ma
IR Reverse current
- - 10 µA VR = 3.0V
λP Peak emission wavelength
BW Spectral bandwidth at half power points
- 880 -
- 80 -
nm IF = 100ma
nm IF = 20ma
ΘHP Emission angle at half power points
tr Output rise time
- 40 -
- 700 -
deg.
ns
IF = 20ma
IF = 100ma
tf Output fall time
- 700 -
ns IF = 100ma
note: 1. Measured into a 0.25” aperture, 1.20” from device lens.
Clairex reserves the right to make changes at any time to improve design and to provide the best possible product.
Clairex Technologies, Inc.
Phone: 972-422-4676
1845 Summit Ave., #404
Fax: 972-423-8628
Plano, Texas 75074-8148
www.clairex.com

PagesPages 1
Télécharger [ CLE232 ]


Fiche technique recommandé

No Description détaillée Fabricant
CLE230 (CLE230 - CLE233) High Power Aluminum Gallium Arsenide IREDs Clairex
Clairex
CLE231 (CLE230 - CLE233) High Power Aluminum Gallium Arsenide IREDs Clairex
Clairex
CLE232 (CLE230 - CLE233) High Power Aluminum Gallium Arsenide IREDs Clairex
Clairex
CLE233 (CLE230 - CLE233) High Power Aluminum Gallium Arsenide IREDs Clairex
Clairex

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche