|
|
Número de pieza | HMC560 | |
Descripción | GaAs MMIC FUNDAMENTAL MIXER | |
Fabricantes | Hittite Microwave | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de HMC560 (archivo pdf) en la parte inferior de esta página. Total 6 Páginas | ||
No Preview Available ! www.DataSheet4U.com
v00.0705
Typical Applications
The HMC560 is ideal for:
• Test Equipment & Sensors
3 • Microwave Point-to-Point Radios
• Point-to-Multi-Point Radios
• Military & Space
Functional Diagram
HMC560
GaAs MMIC FUNDAMENTAL
MIXER, 24 - 40 GHz
Features
Wide IF Bandwidth: DC - 18 GHz
Input IP3: +21 dBm
High LO/RF Isolation: 35 dB
Passive Double Balanced Topology
Compact Size: 1.14mm x 0.59mm x 0.1mm
General Description
The HMC560 chip is a miniature passive double bal-
anced mixer which is fabricated in a GaAs MESFET
process, and can be used as an upconverter or down-
converter from 24-40 GHz in a small chip area. The
wide bandwidth allows this device to be used across
multiple radio bands with a common platform. Excel-
lent isolations are provided by on-chip baluns, and
the chip requires no external components and no
DC bias. Measurements were made with the chip
mounted and ribbon bonded into in a 50-ohm micro-
strip test fixture. Measured data includes the parasi-
ticeffects of the assembly. RF connections to the chip
were made with 0.076mm (3-mil) ribbon bond with
minimal length <0.31mm (<12 mil).
Electrical Specifications, TA = +25° C, IF = 1GHz, LO = +13 dBm*
Parameter
Frequency Range, RF & LO
Frequency Range, IF
Min. Typ. Max.
24 - 36
DC - 18
Min.
Typ.
36 - 40
DC - 18
Conversion Loss
8 10
10
Noise Figure (SSB)
8 10
10
LO to RF Isolation
28 35
27 35
LO to IF Isolation
20 30
18 28
RF to IF Isolation
12 20
18 28
IP3 (Input)
19 21
IP2 (Input)
50 50
1 dB Compression (Input)
13 15
* Unless otherwise noted, all measurements performed as downconverter
Max.
13
13
Units
GHz
GHz
dB
dB
dB
dB
dB
dBm
dBm
dBm
3 - 198
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
1 page Pad Descriptions
Pad Number
Function
3 1 LO
v00.0705
HMC560
GaAs MMIC DOUBLE-BALANCED
MIXER, 24 - 40 GHz
Description
This pad is DC coupled and matched to
50 Ohms from 24 to 40 GHz.
Interface Schematic
2 RF
This pad is DC coupled and matched to
50 Ohms from 24 to 40 GHz.
3 IF
GND
Assembly Drawing
This pad is DC coupled. For applications not requiring
operation to DC, this port should be DC blocked externally
using a series capacitor whose value has been chosen to
pass the necessary IF frequency range. For operation to
DC, this pad must not source/sink more than 2mA of cur-
rent or die non-function and possible die failure will result.
The backside of the die must be connected
to RF/DC ground.
3 - 202
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
5 Page |
Páginas | Total 6 Páginas | |
PDF Descargar | [ Datasheet HMC560.PDF ] |
Número de pieza | Descripción | Fabricantes |
HMC560 | GaAs MMIC FUNDAMENTAL MIXER | Hittite Microwave |
HMC560A | GaAs MMIC FUNDAMENTAL SMT MIXER | Analog Devices |
HMC560LM3 | GaAs MMIC FUNDAMENTAL SMT MIXER | Hittite Microwave |
HMC561 | GaAs MMIC x2 ACTIVE FREQUENCY MULTIPLIER | Hittite Microwave |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |