|
|
PDF SC1474 Data sheet ( Hoja de datos )
| Número de pieza | SC1474 | |
| Descripción | Portable Pentium Dual Phase Power Supply Controller | |
| Fabricantes | Semtech Corporation | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de SC1474 (archivo pdf) en la parte inferior de esta página. Total 1 Páginas | ||
|
No Preview Available !
www.DataSheet4U.com
POWER MANAGEMENT
Description
The SC1474 PowerStep III™ IC is a single chip high-per-
formance Hysteretic PWM controller. With dual integrated
Smart™ Drivers, it powers advanced Pentium® 4 pro-
cessors. The SC1474 features extended Intel Mobile Volt-
age Positioning (IMVP) to increase battery life by reduc-
ing the voltage at the processor when it is heavily loaded.
It directly supports Intel’s SpeedStep™ requirements for
even longer battery life. The SC1474 automatically de-
tects performance and battery mode VIDs. In addition, it
integrates direct “deeper sleep” mode support. All op-
erating modes incorporate automatic “power-save” to
prevent negative current flow in the low-side FET during
light loading conditions, saving even more power.
A 5-bit DAC, accurate to 0.85%, sets the output voltage
reference, and implements the 0.600V to 1.750V range
required by the processor. The hysteretic converter uses
a comparator without an error amplifier, and so provides
the fastest possible transient response, while avoiding
the stability issues inherent to classical PWM controllers.
The SC1474 incorporates a controller for V_VID and au-
tomatically provides the proper sequencing.
SC1474
Portable Pentium® Dual Phase
Power Supply Controller
Features
IMVP3 compliant single chip solution
High speed Dual phase hysteretic controller
VID programmable output
Dual integrated 2A/4A drivers
Integrated VID regulator controller
Automatic performance/battery mode detection
Dynamic phase current matching
Under-voltage lock out on all Vcc inputs
Over-voltage protection on CORE
Current Limit protection on CORE
Thermal protection
Programmable soft-start
Powergood flag with blanking during VID changes
Automatic powersave at light load
TSSOP-38 package
Industrial temperature range
Applications
Advanced Intel microprocessors
The SC1474 operates from +3.3Vdc Vcca and dual 5V
DC drive inputs. It also features soft-start, an open-drain
PWRGD signal with power-good blanking, and an enable
input. Programmable current limiting latches the SC1474
off after 32 current limit pulses. It comes in a space-
saving TSSOP-38 package.
Typical Application Circuit
+V_5
+V_IN
Power
Control
Signals
VID [4:0]
+V_3
+V_VID
Extended
IMVP
Logic
Smart
Driver
Controller
SC1474
Dual Phase
Extended IMVP
CONTROLLER
Smart
VID Driver
Multiplexer
VID
Regulator
Controller
Lo Rcs
+VCORE
0.600V-1.75V
Up to 40A
Lo Rcs
Co
Revision 6, December 2002
1
www.semtech.com
1 page | ||
| Páginas | Total 1 Páginas | |
| PDF Descargar | [ Datasheet SC1474.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| SC147 | (SCxxx) Triacs |  Digitron Electronic |
| SC147 | Thyristor TRIAC 200V 120A 3-Pin(3+Tab) TO-220AB |  New Jersey Semiconductor |
| SC1470 | Synchronous Buck Power Supply Controller |  SEMTECH ELECTRONICS |
| SC1471 | Power Supply Controller | Semtech Corporation |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |