DataSheetWiki


LEDGS75N fiches techniques PDF

Banner - LED Highly-Diffused Lights

Numéro de référence LEDGS75N
Description LED Highly-Diffused Lights
Fabricant Banner 
Logo Banner 





1 Page

No Preview Available !





LEDGS75N fiche technique
www.DataSheet4U.com
LED Highly-Diffused Lights (75 mm)
Features
• Designed to minimize surface textures and elevation changes, while providing
uniform illumination over the field of view
• 59 mm x 75 mm light aperture
• The suggested field of view is 38 mm in diameter and the suggested stand off is 25 mm
• Black anodized aluminum housing
LED Highly-Diffused Light Models
Models
Illumination
Type
Color
Cable
LEDRS75N
LEDGS75N
Continuous
highly-diffused
light
Red 640 nm
Green 530 nm
0.5 m (18")
terminated
with 9-pin
D-sub
connector
(male pins)
LEDRS75N-S
Strobed
highly-diffused
light
Red 640 nm
These models are not stocked and are non-returnable.
1.8 m (6')
terminated
with 9-pin
D-sub
connector
(male pins)
Supply
Voltage
12V dc ±10%
with voltage
regulation of ±1%
Supply
Current
980 mA max.
1.0 A max.
Connections
Pin 1 = +V fan
Pin 2 = dc common fan
Pin 3 = dc common
Pin 4 = +V
Power supply model
PSA-12(E) or
PS2V-12(E)
is recommended
(see other side)
24V dc ±10%
with voltage
regulation of ±1%
7.0 A max.
1 ms pulse
Pin 4 or 5 = +V
Pin 1 or 6 = dc common
Use strobe control
module model SCM
(see other side)
Useful Life
Environmental Rating
Operating Conditions
Green model: 50,000 hours; Red models: 60,000 hours.
Note: actual useful life of strobed lights depends on duty cycle
IEC IP20; NEMA 1
Temperature: 0° to 40°C (+32° to 104°F)
Maximum relative humidity: 95% at 40°C (non-condensing)
82.6 mm 75 mm
(3.25") (2.95")
Light Aperture
25.4 mm
(1.00")
25.4 mm
(1.00")
12.7 mm
(0.50")
25.8 mm
(1.02")
12.7 mm
(0.50")
25.4 mm
(1.00")
77.0 mm
(3.03)
75 mm
(2.95")
Light Aperture
138.4 mm
(5.45")
See
Table
M6 x 1.0
6.4 (0.25") DEEP (4x)
WARRANTY: Banner Engineering Corp. warrants its products to be free from defects for one year. Banner Engineering Corp. will repair or replace, free of
charge, any product of its manufacture found to be defective at the time it is returned to the factory during the warranty period. This warranty does not cover
damage or liability for the improper application of Banner products. This warranty is in lieu of any other warranty either expressed or implied.
Printed in USA
05/01
P/N 67442

PagesPages 2
Télécharger [ LEDGS75N ]


Fiche technique recommandé

No Description détaillée Fabricant
LEDGS75N LED Highly-Diffused Lights Banner
Banner

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche