DataSheetWiki


ADA4850-2 fiches techniques PDF

Analog Devices - (ADA4850-1/-2) Op Amp

Numéro de référence ADA4850-2
Description (ADA4850-1/-2) Op Amp
Fabricant Analog Devices 
Logo Analog Devices 





1 Page

No Preview Available !





ADA4850-2 fiche technique
www.DataSheet4U.com
High Speed, Rail-to-Rail Output,
Op Amp with Ultralow Power-Down
ADA4850-1/ADA4850-2
FEATURES
Ultralow power-down current: 150 nA/amp max
Low quiescent current: 2.4 mA/amp
High speed
175 MHz −3 dB bandwidth
220 V/µs slew rate
85 ns settling time to 0.1%
Excellent video specifications
0.1 dB flatness: 14 MHz
Differential gain: 0.12%
Differential phase: 0.09°
Single-supply operation: 2.7 V to 6 V
Rail-to-rail output
Output swings to within 80 mV of either rail
Low voltage offset: 0.6 mV
APPLICATIONS
Portable multimedia players
Video cameras
Digital still cameras
Consumer video
GENERAL DESCRIPTION
The ADA4850-1, ADA4850-21 are low price, high speed,
voltage feedback rail-to-rail output op amps with ultralow
power-down. Despite their low price, the ADA4850-1/
ADA4850-2 provide excellent overall performance and
versatility. The 175 MHz −3 dB bandwidth and 220 V/µs
slew rate make these amplifiers well-suited for many general-
purpose, high speed applications.
The ADA4850-1/ADA4850-2 are designed to operate at supply
voltages as low as 2.7 V and up to 6 V at 2.4 mA of supply
current per amplifier. In power-down mode, the supply current
is less than 150 nA, ideal for battery-powered applications.
The ADA4850 family provides users with a true single-supply
capability, allowing input signals to extend 200 mV below the
negative rail and to within 2.2 V of the positive rail. The output
of the amplifier can swing within 80 mV of either supply rail.
With its combination of low price, excellent differential gain
(0.12%), differential phase (0.09º), and 0.1 dB flatness out to
14 MHz, these amplifiers are ideal for video applications.
Rev. A
Information furnished by Analog Devices is believed to be accurate and reliable.
However, no responsibility is assumed by Analog Devices for its use, nor for any
infringements of patents or other rights of third parties that may result from its use.
Specifications subject to change without notice. No license is granted by implication
or otherwise under any patent or patent rights of Analog Devices. Trademarks and
registered trademarks are the property of their respective owners.
PIN CONFIGURATIONS
POWER DOWN 1
NC 2
–IN 3
+IN 4
ADA4850-1
8 +VS
7 OUTPUT
6 NC
5 –VS
NC = NO CONNECT
Figure 1. 8-Lead, 3 mm × 3 mm LFCSP
VOUT1 1
–IN1 2
+IN1 3
–VS 4
ADA4850-2
12 +VS
11 VOUT2
10 –IN2
9 +IN2
NC = NO CONNECT
Figure 2. 16-Lead, 3 mm × 3 mm LFCSPP
The ADA4850-1/ADA4850-2 are designed to work in the
extended temperature range of −40°C to +125°C.
2
1
0
–1
–2
–3
–4
G = +1
–5
VS = 5V
RL = 1k
VOUT = 0.1V p-p
–6
1
10
100
FREQUENCY (MHz)
Figure 3. Small Signal Frequency Response
1000
1 Patent pending.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700
www.analog.com
Fax: 781.461.3113
©2005 Analog Devices, Inc. All rights reserved.

PagesPages 16
Télécharger [ ADA4850-2 ]


Fiche technique recommandé

No Description détaillée Fabricant
ADA4850-1 (ADA4850-1/-2) Op Amp Analog Devices
Analog Devices
ADA4850-2 (ADA4850-1/-2) Op Amp Analog Devices
Analog Devices

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche