DataSheetWiki


DAC122S085 fiches techniques PDF

National Semiconductor - 12-Bit Micro Power DUAL Digital-to-Analog Converter

Numéro de référence DAC122S085
Description 12-Bit Micro Power DUAL Digital-to-Analog Converter
Fabricant National Semiconductor 
Logo National Semiconductor 





1 Page

No Preview Available !





DAC122S085 fiche technique
www.DataSheet4U.com
June 2006
DAC122S085
12-Bit Micro Power DUAL Digital-to-Analog Converter
with Rail-to-Rail Output
General Description
The DAC122S085 is a full-featured, general purpose DUAL
12-bit voltage-output digital-to-analog converter (DAC) that
can operate from a single +2.7V to 5.5V supply and uses
210 µA at 3V and 320 µA at 5V. The DAC122S085 is
packaged in a 10-lead MSOP package. The on-chip output
amplifier allows rail-to-rail output swing and the three wire
serial interface operates at clock rates up to 40 MHz over the
entire supply voltage range. Competitive devices are limited
to 25 MHz clock rates at supply voltages in the 2.7V to 3.6V
range. The serial interface is compatible with standard
SPI, QSPI, MICROWIRE and DSP interfaces.
The reference for the DAC122S085 serves all four channels
and can vary in voltage between 1V and VA, providing the
widest possible output dynamic range. The DAC122S085
has a 16-bit input shift register that controls the outputs to be
updated, the mode of operation, the powerdown condition,
and the binary input data. Both outputs can be updated
simultaneously or individually depending on the setting of
the two mode of operation bits.
A power-on reset circuit ensures that the DAC output powers
up to zero volts and remains there until there is a valid write
to the device. A power-down feature reduces power con-
sumption to less than a microWatt with three different termi-
nation options.
The low power consumption and small packages of the
DAC122S085 make it an excellent choice for use in battery
operated equipment.
The DAC122S085 is one of a family of pin compatible DACs,
including the 8-bit DAC082S085 and the 10-bit
DAC102S085. The DAC122S085 operates over the ex-
tended industrial temperature range of −40˚C to +105˚C.
Features
n Guaranteed Monotonicity
n Low Power Operation
n Rail-to-Rail Voltage Output
n Power-on Reset to 0V
n Simultaneous Output Updating
n Wide power supply range (+2.7V to +5.5V)
n Power Down Modes
Key Specifications
n Resolution
n INL
n DNL
n Settling Time
n Zero Code Error
n Full-Scale Error
n Supply Current
— Normal
— Pwr Down
12 bits
±8 LSB (max)
+0.7 / −0.5 LSB (max)
8.5 µs (max)
+15 mV (max)
−0.75 %FS (max)
270 µA (3.6V) / 410 µA (5.5V) max
20 nA (3.6V) / 30 nA (5.5V) typ
Applications
n Battery-Powered Instruments
n Digital Gain and Offset Adjustment
n Programmable Voltage & Current Sources
n Programmable Attenuators
Pin Configuration
20195202
SPIis a trademark of Motorola, Inc.
© 2006 National Semiconductor Corporation DS201952
www.national.com

PagesPages 18
Télécharger [ DAC122S085 ]


Fiche technique recommandé

No Description détaillée Fabricant
DAC122S085 12-Bit Micro Power DUAL Digital-to-Analog Converter National Semiconductor
National Semiconductor
DAC122S085 DAC122S085 12-Bit Micro Pwr DUAL DAC w/Rail-to-Rail Output (Rev. E) Texas Instruments
Texas Instruments

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche